How to Turn Off the Auto Start-Stop Feature in the T-Roc?

3 Answers
VonJanelle
07/29/25 1:17am
The methods for the T-Roc's auto start-stop feature are as follows: 1. Automatic transmission vehicles: Once the car is started, the auto start-stop system is in normal working condition. When encountering a red light or stopping for other reasons, press the brake pedal, and the engine will automatically shut off after approximately two seconds. To restart, simply release the brake and press the accelerator, or gently turn the steering wheel, at which point the engine will restart. 2. Manual transmission vehicles: Unless the auto start-stop button is turned off, the system is also enabled by default. When stopping, shift to neutral, engage the handbrake, and release the clutch. Upon detecting these three actions, the system will automatically shut off the engine. When the clutch is pressed again, the engine will automatically restart.
Was this review help?
16
2
Share
VonEden
08/12/25 11:03am
The first thing I do every time I get in the car is to turn off that auto start-stop! The T-Roc has a button with a circled 'A' near the gear shift on the center console—it lights up yellow when activated. After starting the engine, while the dashboard lights are still on, just press the button once to turn it off (indicator turns gray). However, the system defaults to enabling it every startup, so you’ll need to make a habit of switching it off. Once during heavy rain and flooding, this feature nearly caused engine water ingestion—since then, I’ve insisted on keeping it disabled. I only turn it on during highway cruising to save some fuel. Remember, it may malfunction when the battery is low, so it’s best to check the battery status regularly.
Was this review help?
17
2
Share
Expand All
OJason
10/02/25 2:10am
Does the dashboard prompt for auto start-stop bother you? There's a button with an 'A' and an arrow next to the gear shift—that's the switch. I'm used to pressing it right after starting the engine; when the indicator light goes off, it means it's successfully turned off. Honestly, this feature is quite annoying: in traffic jams, the engine repeatedly starting and stopping easily leads to carbon buildup, and turning on the AC makes the air blow hot. It does save fuel on long highway drives, but I keep it off 90% of the time. Just remember not to press it before the car comes to a complete stop, or it'll trigger an error message.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

What are the reasons for the ignition switch failure in MG6?

The causes of ignition system failure in MG6 include: common faults in the low-voltage circuit, insufficient battery charge. Here are other reasons: Poor or incorrect wiring connections: Poor grounding of the battery, damage to the distributor or Hall sensor, damage to the ignition switch or poor wiring, damage to the transistor ignition control unit or poor wiring. The diagnostic method for low-voltage circuit faults mostly involves using an ammeter or voltmeter to check each line sequentially to eliminate the fault point. Common faults in the high-voltage circuit: High-voltage wire detachment or leakage, distributor cap cracking or breakdown, distributor rotor burning, cracking or breakdown, excessive or insufficient spark plug electrode gap, excessive carbon buildup on spark plugs, damage to the spark plug insulator, damage to the ignition coil or wire detachment.
18
0
Share

What to Do When the BMW 5 Series Engine Oil Temperature is High?

For a BMW 5 Series with high engine oil temperature, replacing the oil cooler is a solution, as the high temperature is often due to its poor working condition. If the engine oil temperature becomes excessively high, immediate repair is necessary to prevent affecting the engine's normal operation. Engine oil is often referred to as the lifeblood of the engine; without it, the engine cannot function properly. The BMW 5 Series is a premium midsize sedan produced by the German automaker BMW. In terms of dimensions, it measures 4998mm in length, 1901mm in width, and 1559mm in height, with a wheelbase of 3108mm. The 5 Series strikes a balance between the sporty and stylish 3 Series and the luxurious and elegant 7 Series, perfectly blending dynamism, elegance, and the functionality of a high-end business sedan.
9
4
Share

Why is one rear fog light on and the other off on the Volkswagen Lavida?

The reason why one rear fog light is on and the other is off is that there is only one rear fog light. The main purpose of having only one rear fog light is to distinguish it from the brake light. According to the EU ECE R38 regulation, if two rear fog lights are installed, they must be positioned more than 10 cm away from the brake light. Front fog light illumination: When driving in adverse weather conditions such as fog, snow, heavy rain, or in smoke-filled environments, front fog lights are essential to illuminate the road ahead and ensure driving safety. In recent years, in terms of styling design, fog lights are often placed on the front bumper. Function of the light shield: The light shield inside the front fog light is designed to block the light emitted by the filament towards the upper part of the reflector, creating a clear cut-off line in the light distribution, i.e., dark above and bright below.
7
2
Share

Is the Mercedes-Benz S-Class Fender Made of Aluminum Alloy?

Mercedes-Benz S-Class fenders are made of aluminum alloy material. Fender Concept: The fender, also known as the wing panel, is divided into front fenders and rear fenders based on installation location. The fenders of motor vehicles are auxiliary reinforcement components that do not affect the overall vehicle structure. They are a type of covering part found on both motorized and non-motorized vehicles. Fender Function: According to fluid dynamics principles, fenders help reduce the drag coefficient, making the vehicle more stable during driving. Front fenders prevent gravel and mud kicked up by the wheels from splashing onto the underbody, thereby reducing damage and corrosion to the chassis.
14
1
Share

What are the dimensions of the Odyssey and Elysion?

The dimensions of the Odyssey and Elysion are as follows: The Odyssey measures 4845mm in length, 1802mm in width, and 1697mm in height. The Elysion measures 4950/1842/1711mm with a wheelbase of 2900mm. Introduction to the Odyssey's configuration: The Odyssey is a vehicle produced by Honda, equipped with satellite navigation, an 8-inch large display with voice guidance function, and utilizes a high-performance 2.4L i-VTEC engine with variable valve timing and lift. Introduction to the Elysion's exterior: From the side view, this vehicle features Yokohama tires with a size of 225/50-R18, creating a more elegant appearance. The rear of the vehicle has a solid and sturdy look, with a hidden exhaust layout and simple taillights, giving the rear a relatively square shape.
12
3
Share

What Causes the Central Locking System Failure in Chery Tiggo 5?

Chery Tiggo 5 central locking system failure may be due to a dead remote battery. Here are the specific reasons: Dead remote battery: If the battery is depleted, the doors cannot be controlled via the remote, but manual locking/unlocking is still possible. Strong magnetic field interference near power stations or high-power electrical devices can disrupt the connection between the remote and door locks. Remote signal loss is another common issue requiring recoding. Aging motor: Common central locking system failures include: motor aging (requires replacement), blown fuse in the switch circuit (requires replacement), faulty central locking control unit (requires replacement), or loosened main motor linkage (needs tightening). Issues like blown fuses can only be resolved by replacement, unless the problem is mechanical and repairable.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.