How to Turn Off the Auto Start-Stop Feature in the Honda Avancier?

How to Unlock the Steering Wheel Lock on Hongqi H5?

The method to unlock the steering wheel lock on Hongqi H5 is as follows: Hold the steering wheel with your left hand and gently shake it, while simultaneously turning the key with your right hand to unlock it. When the key is removed, the locking tongue on the ignition lock moves into the slot, thereby locking the steering wheel. There are mainly three types of steering wheel locks: 1. Top hook locks with two hooks, such as folding locks or telescopic locks; 2. Baseball bat-shaped locks resembling a baseball bat; 3. T-shaped locks where one end clamps onto the steering wheel and the other end presses against the dashboard. Steering wheel locks are effective anti-theft tools for cars, consisting of a lock handle, lock base, and lock rod. The lock base and lock shell are directly installed on the lock handle, with one end of the lock handle directly equipped with a lock rod. The lock rod has a series of platforms with vertical edges on one side and inclined edges on the other. When in use, the positioning fork and hook of the steering wheel lock are first secured onto the car's steering wheel rim to restrict the steering wheel's rotation, achieving an anti-theft effect.

3

5

Share

What are the dimensions for reverse parking in a driving practice area?

The standard dimensions for reverse parking garages for small and large vehicles are as follows: For small vehicles, the garage length is 5.25 meters and the width is 2.3 meters. The total road length is 15.9 meters, with a single side length of 6.8 meters and a width of 5.8 meters. The standard for large vehicle garages: the garage width is the vehicle width plus 60 cm, the garage length is the vehicle length plus 70 cm, and the road width is 1.5 times the vehicle length. Reverse parking evaluation criteria: failing to follow the prescribed route and sequence results in disqualification; the vehicle body crossing the line results in disqualification; failing to fully enter the garage results in disqualification; stopping midway results in disqualification; exceeding 4 minutes results in disqualification. Reverse parking tips: Reversing in and out isn't hard, fasten your seatbelt, shift gears, and flash the left turn signal. Press the clutch and release the handbrake, slowly lift the clutch to start smoothly. Adjust the car body by watching the right line, align the left mirror's vertical seam with the right line. Stop when the front line aligns with your shoulder, shift to reverse gear and release the clutch. When the left mirror covers the corner of the horizontal line, turn the steering wheel fully to the right. Watch the left mirror for the garage line, turn back one circle at a 30-degree angle, and when the car is parallel to the line, straighten the steering wheel with two full turns. When the left mirror covers the front corner of the garage, press the clutch and brake. Shift to first gear to exit, turn the steering wheel fully to the left when the front of the car touches the line. Stop when the front of the car covers the line, keep the steering wheel steady and reverse. Watch the right mirror for the garage line, turn back one circle at a 30-degree angle, and when the car is parallel to the line, straighten the steering wheel with two full turns. When the left mirror covers the front corner of the garage, press the clutch and brake. Shift to first gear to exit, turn the steering wheel fully to the right when the front of the car touches the line. Stop when the front of the car covers the line, adjust the car body skillfully. New garages have no poles to reference, only ground markings. The garage length is much shorter, just enough to fit a car completely. The process involves reversing in from the right, driving out and turning left, then reversing back in, and finally driving out to return to the starting point. This process is much simpler, eliminating the current test step of moving the car within the garage.

3

Share

How many points will be deducted for a motor vehicle driving on the road without passing the annual inspection as required?

A motor vehicle driving on the road without passing the annual inspection as required will be deducted 3 points. The following are the specific regulations for vehicle annual inspection time: 1. Passenger transport vehicles: inspected once a year within 5 years; inspected every 6 months after exceeding 5 years. 2. Trucks and large or medium-sized non-passenger transport vehicles: inspected once a year within 10 years; inspected every 6 months after exceeding 10 years. 3. Small and mini non-passenger transport vehicles: inspected once every 2 years within 6 years; inspected once a year after exceeding 6 years; inspected every 6 months after exceeding 15 years.

3

4

Share

Where Do Items Dropped Into the Front Vent Fall?

When items are dropped into the front vent, they usually fall into the vent outlet. They may also fall into the air conditioning duct. Below is a detailed introduction to car air conditioning: 1. Overview: The car air conditioning system (air-conditioning-device), referred to as car AC, is used to adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to an optimal state. 2. Function: It provides a comfortable environment for the driver, reducing travel fatigue, and creates favorable working conditions to ensure driving safety. The car air conditioning system typically includes a cooling unit, heating unit, and ventilation unit.

14

3

Share

What Causes Low Water Temperature in Cummins Engines

Cummins engine low water temperature is generally caused by a damaged thermostat or a constantly running cooling fan. When the vehicle's water temperature is low, it is necessary to check the coolant level and whether it has deteriorated; inspect the engine oil level; check for any foreign objects blocking the water radiator; examine if the fan blades are deformed; verify the proper functioning of the water temperature sensor and its circuit; and perform a disassembly inspection of the thermostat. If the thermostat fails and the valve cannot close, the coolant will continuously circulate in the large loop, potentially causing the engine's water temperature to be too low. Alternatively, some vehicles may have their thermostat removed during summer to reduce high temperatures, which can also result in very low engine water temperature.

4

Share

Is a private car within ten years inspected every two years?

Is a private car within ten years inspected every two years? The following is a detailed introduction to the annual inspection: 1. Scope: The annual inspection refers to the inspection of the vehicle, including the appearance, chassis, lights, horn, and exhaust emissions, mainly to eliminate potential safety hazards in time and check whether the vehicle meets the standards, reducing the occurrence of traffic accidents. 2. Time: The annual inspection is generally conducted once a year at the inspection station by the end of the year. The deadline for the annual inspection can be found on the supplementary page of the driving license. 3. New regulations: The appearance inspection of private cars has been relaxed. During the appearance inspection, modifications to the grille, pedals, roof rack, bumper, and wheel hubs are allowed.

4

3

Share

How to Turn Off the Auto Start-Stop Feature in the Honda Avancier?

How to Unlock the Steering Wheel Lock on Hongqi H5?

What are the dimensions for reverse parking in a driving practice area?

How many points will be deducted for a motor vehicle driving on the road without passing the annual inspection as required?

Where Do Items Dropped Into the Front Vent Fall?

What Causes Low Water Temperature in Cummins Engines

Is a private car within ten years inspected every two years?

How to Deal with Cement Water on the Car?

What are the differences between Mercedes-Benz E and C?

What documents are required for sedan annual inspection?

How to Remove a Spare Tire?