How to Turn Off the Auto-Locking Feature on the Hongqi H7?

1 Answers
Jimenez
07/29/25 10:34pm
The method to turn off the auto-locking feature on the Hongqi H7 is as follows: 1. First, turn on the ignition to put the car in the 'on' position, but do not start the engine; 2. Hold down the lock button for about 10 seconds until you hear a beep sound inside the car or see the lights flash twice, indicating that the auto-locking feature has been successfully deactivated. The auto-locking feature is designed for anti-theft purposes, allowing the car to lock quickly after starting to prevent door-pulling robberies during traffic jams or at red lights. It provides a certain level of security and protects passengers, especially children, by preventing them from opening the door handles while the car is in motion. In terms of powertrain, the Hongqi HS5 is equipped with a 2.0T turbocharged engine, paired with a 6-speed automatic transmission. For the suspension system, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
12
1
Share
More Forum Discussions

What causes the rattling noise in the Ninja400?

The rattling noise in the Ninja400 may be caused by the meshing of the balancer shaft gears. Here is some relevant information about the Ninja: 1. New Instrument Panel: Features a newly designed asymmetrical instrument panel. The tachometer adopts an intuitive analog style, while speed, mileage, trip distance, etc., are displayed digitally on the LCD screen. Additionally, it includes a fuel gauge, clock, and an economy driving indicator for more fuel-efficient riding. 2. Short Muffler: Equipped with a newly designed short muffler with a unique cross-section. Combined with a small tail spoiler and 140mm-wide tires, it delivers a powerful and dynamic presence that exceeds its class. 3. 140mm-Wide Tires and 10-Spoke Wheels: To match the enhanced engine performance, the rear tire has been widened from the previous 130mm to 140mm, improving straight-line stability. To complement the wider wheel, the Ninja-ZX-14R features a new 10-spoke wheel design that enhances the sense of quality.
13
3
Share

What type of engine oil is used in the Changan CS55?

Changan CS55 uses Shell HX7 5w-40 synthetic engine oil, with an oil capacity of approximately 4 liters. Below is relevant information about engine oil: 1. Functions: Engine oil, also known as engine lubricant, serves multiple purposes including lubrication and wear reduction, auxiliary cooling, sealing against leaks, rust and corrosion prevention, as well as shock absorption. 2. Classification: Gasoline engine oils are divided into two categories: mineral oils and synthetic oils. Synthetic oils are further classified into semi-synthetic and full-synthetic engine oils. 3. Composition: Engine oil consists of two main components: base oils and additives. Base oils form the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance limitations of base oils, imparting new characteristics. Additives are crucial components of lubricants.
5
4
Share

Is the Sylphy equipped with a foot brake or a handbrake?

The Sylphy uses a manual handbrake. Below is more relevant information: 1. Sylphy: The Sylphy is a mid-size sedan under Dongfeng Motor Co., Ltd., and is one of the most typical mainstream family cars in the Chinese market (alongside models like the Octavia PRO, Sagitar, Lavida, Corolla, and Bora). 2. Differences between handbrake and foot brake: (1) Different principles: The foot brake is for driving braking, while the handbrake is for parking braking. (2) Different braking mechanisms: The foot brake applies braking to all four wheels, while the handbrake only brakes the rear wheels. (3) Different usage scenarios: The foot brake is used to brake or slow down the car while it is moving, whereas the handbrake is used after the vehicle has stopped to prevent it from rolling. (4) Different operation methods: When deceleration is needed, release the throttle, do not press the clutch, do not shift gears, or shift to a lower gear for more significant engine braking. On icy or slippery roads, engine braking should be used as much as possible to effectively prevent skidding.
1
4
Share

How to reset the maintenance light on Zotye T700?

The method to reset the maintenance light on Zotye T700 is: 1. Turn off the ignition switch; 2. Simultaneously press and hold the two buttons on the instrument panel; 3. Turn the key to the position where all instrument lights illuminate; 4. Wait until the wrench light goes out and release the two buttons (mileage reset button); 5. Turn off the ignition switch and then turn it on again. Taking the 2018 Zotye T700 as an example, it is a mid-to-large-sized SUV with body dimensions of: length 4748mm, width 1933mm, height 1697mm, wheelbase of 2850mm, fuel tank capacity of 64L, and curb weight of 1787kg. The 2018 Zotye T700 features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 177PS, maximum power of 130kW, maximum torque of 245Nm, paired with a 6-speed dual-clutch transmission.
11
3
Share

Can the car still be driven if it shows an oil change is needed?

If the vehicle displays a message indicating an oil change is needed, it can still be driven. The steps for changing the oil are: 1. Lift the car, remove the protective plate, and place a container with a capacity of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the oil drain plug after draining and wipe it with a tissue to check for oil leaks; 3. Reinstall the protective plate and lower the car, then use a funnel to add oil through the oil filler port. The functions of engine oil are: 1. To separate the surfaces of relatively sliding parts, thereby reducing wear; 2. To carry heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine; 3. To circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away dirt generated on the working surfaces of the parts through the flow of the lubricating oil.
12
1
Share

How to Remove the Steering Wheel Airbag on a Lexus ES?

The method for removing the steering wheel airbag on a Lexus ES is as follows: 1. Insert a tool into the left removal hole of the steering wheel to pry open the lock; 2. Insert the tool into the right and bottom removal holes of the steering wheel to pry open the locks; 3. Unfasten the airbag wiring harness clip on the steering wheel; 4. Remove the horn grounding wire inside the steering wheel; 5. Lift the yellow locks on both sides of the airbag connector and pull out the plug; 6. Pry open the unlocking clips to complete the removal of the steering wheel airbag. Taking the 2020 Lexus ES as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 4975mm, width 1866mm, height 1447mm, a wheelbase of 2870mm, a fuel tank capacity of 49.3 liters, and a curb weight of 1720kg.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.