How to Turn Off the Anti-Slip System Light?

1 Answers
PeterLee
07/29/25 1:39pm
The methods to eliminate the anti-slip system light are: 1. Accidentally pressing the ESP off button; 2. Loose or faulty sensor connectors; 3. Short circuit or related fuse blown; 4. Software issues causing poor signal transmission; 5. ABS pump failure. The ways to cancel the anti-slip system light are: 1. Restart the engine and briefly press the ESP off button on the vehicle to check if the ESP was accidentally turned off; 2. Visit a 4S shop for inspection, use a specialized fault diagnostic tool to locate the issue, and after repair, use a decoder to clear the fault code to ensure the ESP works normally, then the fault light will turn off.
Was this review help?
9
3
Share
More Forum Discussions

Where to Apply for Vehicle ETC?

ETC can be applied for at bank branches, highway service areas, and other institutions. The application requires the original and photocopies of the vehicle owner's valid ID and vehicle license. If the application is not made by the owner, the agent's valid ID must also be provided. The photocopy of the vehicle license must include the page with the most recent annual inspection stamp. Additionally, a Postal Savings credit card application form is required, as the credit card will be used to bind the ETC card. After obtaining the credit card, two POS transaction slips are needed to collect and install the ETC onboard device for free at designated Postal Savings outlets, with no additional charges incurred. Applicants must be between 18 and 60 years old and own the vehicle in their name. ETC stands for Electronic Toll Collection. The application requires the original and photocopies of the vehicle owner's valid ID and vehicle license. If the application is not made by the owner, the agent's valid ID must also be provided. The photocopy of the vehicle license must include the page with the most recent annual inspection stamp. A bank card for deducting highway toll fees is also required. Applicants must be between 18 and 60 years old and own the vehicle in their name. Here are some considerations for installing ETC: Do not obstruct the driver's view; it is best to install it behind the rearview mirror. Many vehicle models have steeply angled windshields, which can reduce the driver's field of vision. Installing the ETC without considering this can increase blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or in positions that might block the solar panel. Once installed, do not remove it arbitrarily: The adhesive in the middle has an anti-tamper rod connected to a switch. After installation, the windshield will press the rod in. If the tag is removed, the rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. Unlocking requires visiting an ETC service point. This feature prevents multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle ahead due to its faulty ETC device, maintain a distance of at least 10 meters. The ETC lane recognizes vehicles at speeds of up to 20 km/h; exceeding this speed may result in failed deductions. Using a debit card with insufficient balance will also cause deduction failures.
18
3
Share

How to Adjust the Rearview Mirrors for Subject Two?

Method for adjusting the rearview mirrors in Subject Two: In the mirror image, the sky, ground, and car body should be divided in a certain proportion. 1. Left rearview mirror: In the mirror image of the left rearview mirror, adjust vertically so that the ground and sky each occupy half, and adjust horizontally so that the car body occupies 1/4, ensuring the lowest point of the wheel and its contact with the ground are visible. 2. Right rearview mirror: In the mirror image, adjust vertically so that the sky occupies 1/4 and the ground occupies 3/4, and adjust horizontally the same as the left rearview mirror, occupying 1/4. Functions of the rearview mirrors: 1. Observing road conditions: While driving, the driver can observe the road conditions on both sides through the rearview mirrors to perform operations such as lane changes and overtaking. 2. Reference points: During operations like parallel parking or reversing into a parking space, reference points can be observed through the rearview mirrors.
3
5
Share

How to Remove Oxidation Layer on Car Paint?

Methods to remove the oxidation layer on car paint include: repainting, waxing, glazing, and coating. The causes of oxidation layer formation are: 1. Increasing chemical substances in the air that oxidize the car paint surface; 2. Acid rain and exposure to ultraviolet rays in hot weather; 3. Long-term attachment of dust; 4. Oxidation caused by insect remains, bird droppings, tree sap, and oil fumes. Car paint refers to the coating on the car's paint surface, which involves applying a thin film to protect the glossiness of the paint from fading and to provide a physical protective layer for the paint surface.
14
2
Share

What are the length, width, and height of the Volkswagen Touareg?

The length, width, and height of the Volkswagen Touareg are: length 4878mm, width 1984mm, height 1717mm, with a wheelbase of 2899mm, fuel tank capacity of 90 liters, luggage compartment capacity ranging from 810 to 1800 liters, and a curb weight of 2053kg. The body structure is a 5-door, 5-seat SUV. The Volkswagen Touareg is equipped with a 2.0T turbocharged engine, delivering a maximum power of 180kW and a maximum torque of 370Nm, paired with an 8-speed automatic transmission. It features multi-link independent suspension for both front and rear, and the tire specification is 255/55R19.
1
0
Share

How to Cancel the Tire Pressure Warning on the Tiguan?

Tiguan cancels the tire pressure warning method is: 1. Press and hold the tire pressure button to turn off the warning light, then press the tire pressure button again; 2. Turn off the car and restart it; 3. Press and hold the tire pressure button again, and the tire pressure warning will be eliminated. Taking the Tiguan 2017 model as an example, its body dimensions are: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, fuel tank capacity 63l, luggage compartment capacity 400 to 1530l. The Tiguan 2017 model is equipped with a 1.8t turbocharged engine, with a maximum power of 118kw and a maximum torque of 250nm, matched with a 6-speed automatic manual transmission.
11
1
Share

What does it mean when the engine light on the car dashboard turns yellow?

The yellow engine light on the car dashboard indicates an engine malfunction, which can be caused by: 1. A clogged air filter restricting airflow; 2. Poor fuel quality leading to increased carbon deposits in the engine cylinders; 3. Faulty spark plugs, ignition coils, fuel pump, or clogged fuel lines causing improper combustion of the air-fuel mixture; 4. Damaged, poorly connected, or interrupted signals from sensors such as the coolant temperature sensor, crankshaft position sensor, mass airflow sensor, intake air temperature sensor, or oxygen sensor, preventing the ECU from accurately obtaining engine data; 5. Improper maintenance increasing the engine's operational burden.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.