How to Turn Off the Anti-Skid Function on the Mercedes-Benz B200?

2 Answers
VonLucy
07/29/25 7:05pm
Method to turn off the anti-skid function on the Mercedes-Benz B200: Press and hold the anti-skid switch to turn it off. The Electronic Stability Program (ESP), Traction Control System (TCS), Anti-Slip Regulation (ASR), and Vehicle Dynamic Control (VDC) are all derivatives of the car's anti-skid system. Among them, the main function of the Electronic Stability Program is to control the vehicle's longitudinal and lateral stability, ensuring the vehicle moves according to the driver's intentions. The Mercedes-Benz B200 is a compact car under the Mercedes-Benz brand, with dimensions of 4423 mm in length, 1796 mm in width, and 1555 mm in height, and a wheelbase of 2729 mm. In terms of power, the Mercedes-Benz B200 has a maximum horsepower of 136 hp, a maximum torque of 200 Nm, and a maximum power output of 100 kW.
Was this review help?
17
1
Share
LuciaLee
08/14/25 1:13pm
As a long-term owner of a Mercedes-Benz B200, the anti-skid function is actually the core feature of the ESP system, which automatically helps stabilize the vehicle while driving. Turning it off is simple: after starting the vehicle, locate a button labeled "ESP OFF" near the dashboard or in the center console area, and press it lightly. At this point, a warning light usually illuminates on the dashboard to indicate the system has been deactivated. Why turn it off? In low-traction conditions like snow, mud, or sand, the system might over-intervene, causing wheel spin and difficulty moving forward—turning it off can actually make the vehicle easier to control. However, it’s important to note that disabling the anti-skid function means losing safety protection, making the car prone to skidding or losing control during turns or at high speeds. Outside urban areas, you’ll need to drive with extra caution. I usually only turn it off for a few minutes in specific road conditions and promptly reactivate it afterward to ensure daily driving safety. Mercedes-Benz’s design is quite user-friendly—easy to operate but also emphasizing responsibility.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

How much engine oil should be added to the Volkswagen Tayron?

The Tayron requires 5.5 liters of engine oil. When adding oil, it is essential to ensure that the oil level is between the min and max marks on the dipstick. The Tayron is a mid-size SUV under the Volkswagen brand, equipped with three engine options: a 1.4-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. All three engines are paired with a 7-speed dual-clutch transmission. More details are as follows: 1. Engine oil is referred to as the lifeblood of the engine. Inside the engine, it not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat. 2. Without engine oil, the engine cannot function properly. Over time, the performance of engine oil degrades, so it is important for car owners to change the oil regularly. When adding oil, always ensure the oil level is between the min and max marks on the dipstick.
4
0
Share

Differences Between the 2019 Magotan Leading and Luxury Trims

The differences between the 2019 Magotan Leading and Luxury trims are as follows: 1. Different configurations: The Magotan Leading trim only has side airbags in the front row and does not include knee airbags; the Magotan Luxury trim has side airbags in both the front and rear rows and includes knee airbags. 2. Different active and passive safety equipment: The Magotan Leading trim does not have a fatigue driving reminder; the Magotan Luxury trim includes a fatigue driving reminder. 3. Different control and anti-theft configurations: The Magotan Leading trim lacks a rearview camera, keyless start system, and keyless entry function; the Magotan Luxury trim is equipped with a rearview camera, keyless start system, and keyless entry function. The dimensions of the 2019 Magotan are 4866mm in length, 1832mm in width, 1464mm in height, with a wheelbase of 2871mm.
16
1
Share

How to Open the Sunroof on the Sylphy?

Sylphy sunroof switch usage method: To open the sunroof, push the sunroof switch to the OPEN side. To close the sunroof, push the sunroof switch to the CLOSE side; To tilt open the sunroof, push the sunroof switch to the CLOSE side until the sunroof closes, then release the sunroof switch, and push the sunroof switch to the UP side again. To close the sunroof, push the sunroof switch to the DOWN position. Content expansion: 1. The sunroof can quickly cool down the car by extracting the stuffy air while driving. 2. The car sunroof can eliminate fog. In seasons with large temperature differences, if the side windows are closed while driving, the front windshield can easily fog up. At this time, the owner only needs to open the sunroof for a few seconds to quickly remove the fog. 3. The car sunroof can quickly exchange fresh air. Opening the sunroof while driving can rapidly increase the speed of air circulation inside the car, thereby improving ventilation in the cabin.
2
0
Share

What does it mean when the vehicle stability control system light is on?

The illumination of the vehicle stability control system light is primarily caused by a malfunction in the electronic stability control system. Here is relevant information: 1. When this fault occurs, it is recommended to visit a 4S shop to use professional diagnostic equipment to read the fault codes, and then proceed with repairs based on the fault codes. The vehicle stability system is also known as the ESP system, which mainly consists of three major components: sensors, actuators, and the electronic control unit. 2. The sensors mainly include wheel speed sensors, steering angle sensors, lateral acceleration sensors, yaw rate sensors, and brake master cylinder pressure sensors. The actuators mainly include traditional braking systems and hydraulic regulators. The electronic control unit works in conjunction with the engine management system, and the two cooperate to intervene in and adjust the engine's power output.
13
3
Share

Where is the USB port located in Hyundai ix35?

The original USB port of the Hyundai ix35 is located on the small platform in front of the gear lever, at the position of the cigarette lighter in the car. Most are below the CD audio system, and you can see it by removing the cigarette lighter. The USB ports inside the car are set up for audio data transmission, used for plugging in a USB drive to play music, so most vehicle interfaces have a current of only 5V/0.5A. This current is not suitable for charging mobile phones. Here is some extended information about the Hyundai ix35: 1. The Hyundai ix35 is an SUV model. The Hyundai ix35 will replace the Tucson model and was officially introduced for domestic production in 2010. Beijing Hyundai has stated that the domestic version of the ix35 will no longer use "Tucson" as the model name. The ix35 offers two engine options: a 2.0-liter and a 2.4-liter. Both engines are the new Theta II dual CVVT all-aluminum four-cylinder gasoline engines, and there is no visible difference between the two engines in appearance. 2. The maximum output power of the 2.0-liter engine is 120kW (163 horsepower)/6200rpm, with a maximum torque of 194 Nm/4600rpm; the 2.4L engine has a maximum output power of 128kW (174 horsepower)/6000rpm, with a maximum torque of 226 Nm/4000rpm.
19
5
Share

How to Remove the Dashboard of Volkswagen Lavida?

The method to remove the dashboard of Volkswagen Lavida is as follows: 1. Adjust the steering wheel backward, then remove the screws from the lower end of the combination switch cover; 2. Remove the upper part of the cover, take off the dashboard guard ring and trim, and then remove the screws at the top of the dashboard to complete the disassembly. The body dimensions of the Volkswagen Lavida are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm and a fuel tank capacity of 51 liters. The Volkswagen Lavida is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.