How to turn off the ambient light on BYD Qin PRO?

1 Answers
FinleyLee
07/29/25 3:12pm
Method to turn off the ambient light on BYD Qin PRO: The ambient light cannot be manually turned on as it does not have an independent switch. It is automatically activated through light sensing. When it gradually gets darker, the light is automatically controlled by the light sensor. The activation conditions are when the ignition switch is in the ON position and the ambient light is dim. The LED lights on the roof console will then illuminate, emitting a soft glow to assist the vehicle occupants. The BYD Qin Pro is available in three versions: fuel-powered, DM dual-mode plug-in hybrid, and EV pure electric. It is equipped with BYD's D+ open ecosystem, based on the DiLink intelligent connectivity system. In terms of body dimensions, the BYD Qin Pro measures 4765mm in length, 1837mm in width, and 1500mm in height.
Was this review help?
5
4
Share
More Forum Discussions

Are Cars Considered Non-Motor Vehicles?

Cars do not belong to the category of non-motor vehicles. The basic information about non-motor vehicles is as follows: According to the "Traffic Safety Law," non-motor vehicles refer to vehicles driven by human or animal power that travel on roads, as well as vehicles with power devices but designed with maximum speeds, empty weights, and dimensions that comply with national standards, such as motorized wheelchairs for the disabled and electric bicycles. Based on management practices, non-motor vehicles are typically classified into bicycles, tricycles, electric bicycles, motorized wheelchairs for the disabled, and animal-drawn vehicles, with a maximum speed limit of 15 kilometers per hour. The traffic regulations for non-motor vehicles are as follows: Adhere to safety rules and drive in designated lanes; driving non-motor vehicles on roads must comply with relevant traffic safety regulations. Non-motor vehicles should travel within non-motor vehicle lanes; on roads without non-motor vehicle lanes, they should travel on the right side of the motor vehicle lane. Crossing motor vehicle lanes; when riding bicycles, electric bicycles, or tricycles across motor vehicle lanes, riders should dismount and push their vehicles. If there are crosswalks or pedestrian crossing facilities, they should use them; if there are no crosswalks, pedestrian crossing facilities, or if it is inconvenient to use such facilities, they may proceed straight after confirming safety. Speed limits; motorized wheelchairs for the disabled and electric bicycles traveling in non-motor vehicle lanes must not exceed 15 kilometers per hour. Borrowing lanes; non-motor vehicles unable to travel in their designated lanes due to obstruction may use adjacent motor vehicle lanes in the affected section and must return to the non-motor vehicle lane promptly after passing the obstruction. Motor vehicles encountering this situation should slow down and yield.
3
0
Share

What is the power of the Passat New Energy in pure electric mode?

Passat New Energy's pure electric mode power can reach 85KW. The basic information of the Passat is as follows: The brand is Passat, the manufacturer is Volkswagen, the vehicle dimensions are 4870mm✖️1834mm✖️1472mm, the maximum speed can reach 230km/h, the drive mode is front-wheel drive, the braking system is front disc and rear disc, the curb weight is 1520 kg, the wheelbase is 2803mm, the luggage compartment volume is 490 liters, the fuel tank capacity is 70 liters, and the standard seating capacity is 5. Here is the introduction to the Passat New Energy vehicle: The Passat New Energy model uses a 1.4-liter turbocharged engine. This 1.4-liter turbocharged engine is codenamed ea21-djz, with a maximum power of 110kw and a maximum torque of 250 Nm. The maximum power speed is 5000 to 6000 rpm, and the maximum torque speed is 1500 to 3500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 85kw and a maximum torque of 330 Nm. This vehicle uses a 6-speed dual-clutch transmission. The Passat New Energy model uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. This vehicle is a plug-in hybrid model. Plug-in hybrid vehicles require an external power source to charge the battery, and the battery capacity of plug-in hybrid vehicles is relatively large, with a high range in pure electric mode.
7
0
Share

How to distinguish the intake and exhaust camshafts of Geely Emgrand?

The camshafts of Geely Emgrand can be distinguished by the letters marked on them - IN stands for intake, while EX indicates exhaust. Below are the symptoms of a damaged car camshaft: 1. The car has high-voltage spark but takes longer to start, though it can eventually run. 2. During startup, crankshaft reversal may occur, accompanied by backfire in the intake manifold. 3. Unstable idle speed with severe shaking, similar to engine misfire symptoms. 4. Insufficient acceleration prevents the car from gaining speed, even when RPM exceeds 2500. 5. The vehicle exhibits high fuel consumption, excessive exhaust emissions, and black smoke from the tailpipe.
7
3
Share

Which Audi model is the fastest?

Audi's fastest car is the Audi R8. Introduction to the Audi R8: The new Audi R8 will be equipped with Michelin Pilot Sport Cup 2 tires. The Audi R8 is a mid-engine, two-seater sports car launched by the German automaker Audi in 2006, with a top speed of 316 km/h. The Audi R8 is Audi's first mass-produced mid-engine supercar, developed on the Lamborghini platform, incorporating Audi's winning experience from various motorsport events, cutting-edge technology, and a groundbreaking design. The powerful V8 and V10 engines, permanent all-wheel-drive system, and Audi's aluminum space frame body structure give the R8 outstanding dynamic performance, delivering exceptional performance on both the track and the road. Audi R8 Exterior: In terms of exterior design, the Audi R8 has a width of 1900 mm, with length and height measuring 4430 mm and 1250 mm respectively. The long wheelbase of 2650 mm provides ample space for the two-seater cockpit. The R8's body hugs the road closely, with a muscular rear end, and the transition between the doors and side air intakes is harmoniously designed. Between the wheel arches and the roof behind the doors, there are large air intakes that supply sufficient airflow for the V8 engine's intake and cooling. The front grille of the Audi R8 uses black plastic strips instead of the previous silver chrome trim. The headlights have been redesigned, with horizontal L-shaped daytime running lights that look sharper than the current model. The redesigned turn signals, composed of six recessed light sources, are positioned above the headlights. At the rear, the taillights have been redesigned with a flat figure-eight shape, appearing more aggressive than the previous square design. The current oval exhaust pipes have been replaced by round ones.
1
5
Share

Do Novice Drivers Generally Commit More Traffic Violations?

Generally, novice drivers tend to commit more traffic violations. Below are some common violations among new drivers: 1. Illegal lane changes by crossing prohibited markings: Many novice drivers focus excessively on avoiding scratches while driving and overlook the solid or dashed lines on the road, often changing lanes illegally by crossing prohibited markings. For example, single or double solid yellow lines are prohibited markings, and driving over or crossing them constitutes a violation. Additionally, making U-turns recklessly, assuming it's acceptable as long as there are no guardrails, is extremely dangerous behavior—not only is it a violation but also prone to causing accidents. 2. Failing to follow directional lane markings: The most common mistake among novice drivers is turning from a straight lane or going straight from a turning lane, which violates directional lane rules. This often occurs when drivers neglect to notice the directional arrows on the road or, in a hurry, proceed incorrectly. Therefore, it's crucial to stay focused, observe clearly, and change lanes in advance to avoid unnecessary trouble. 3. Running a green light: Many drivers know they must not run a red light but are unaware that running a green light is also prohibited. According to regulations, when encountering congestion at an intersection ahead, vehicles must wait in line outside the intersection and not enter it. If the intersection is severely congested, even if the light is green, drivers must not proceed further to avoid worsening the congestion—otherwise, it counts as running a green light. 4. Illegal parking: Nowadays, parking is a major headache for experienced drivers, often due to a lack of available spots. Temporarily parking by the roadside can easily result in a ticket if one isn't careful. While seasoned drivers may manage better, novice drivers, unfamiliar with parking rules, are more likely to park illegally. For instance, parking in non-motorized lanes, near bus stops, at intersections, in areas with no-parking signs, or on sidewalks should be strictly avoided.
20
1
Share

What are the effects of using different gasoline in cars?

Using gasoline with different octane ratings and from different manufacturers can lead to variations in vehicle performance and may impact engine longevity. Not only does the octane rating affect engine torque, but even gasoline with the same rating from different producers can result in different engine power outputs. More details are as follows: 1. Currently, gasoline on the market comes in various octane ratings such as 90, 93, 95, and 97. These numbers represent the gasoline's octane number, indicating its anti-knock properties, and have no relation to the cleanliness of the gasoline. The notion that "higher octane gasoline is cleaner" is entirely misleading. 2. It is more scientific and economical, and maximizes engine efficiency, to refuel according to the engine's compression ratio or the vehicle's manual specifications. During the design phase, car engines are configured to use a specific gasoline grade based on the compression ratio. 3. The compression ratio is a crucial structural parameter of an engine, defined as the ratio of the volume of gas at the start of compression (when the piston is at bottom dead center) to the volume at the end of compression (when the piston is at top dead center). From the perspectives of power and efficiency, a higher compression ratio is generally better. A high compression ratio enhances power output, thermal efficiency, and consequently improves acceleration and top speed. However, the compression ratio in gasoline engines cannot be too high due to limitations imposed by cylinder material properties and the risk of combustion knock. 4. Simply put, high-compression engines require high-octane fuel. Higher-octane fuel burns more slowly, reducing combustion knock, which is why engines with higher compression ratios need it. Conversely, lower-octane fuel burns faster and produces more combustion knock, making it suitable for engines with lower compression ratios.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.