How to Turn Off the Airbag Light?

1 Answers
VanCora
07/28/25 4:13pm
Methods to eliminate the airbag light: Send the vehicle to a 4S shop for inspection and repair as soon as possible. After confirming there are no issues, the staff will use a specialized fault decoder to turn off the airbag light. Unlike the tire pressure light on some car models, which can be manually reset, the airbag light serves as a reminder to check and repair when it illuminates. Here is some information about airbags: 1. An airbag generally consists of sensors, a microprocessor, an electronic control unit, an airbag cover and support ring, the airbag itself, and an airbag module. 2. If the airbag indicator light continues to flash or stays on for more than 6-8 seconds after the vehicle is started, or if it flashes for 5 seconds and then stays on while the vehicle is in operation, it indicates a possible fault with the airbag system.
Was this review help?
8
4
Share
More Forum Discussions

Where is the sunroof drain hole of the Golf located?

The sunroof drain holes of the Golf are located at the four corners of the sunroof. Even when the sunroof is closed on rainy days, rainwater can seep into the car through the gaps around the sunroof. Below is some relevant information about the sunroof: 1. Impact of a clogged sunroof drain hole: Sunroofs have become one of the must-have configurations when purchasing a car. If the sunroof drain holes are clogged, the roof, which is supposed to shield against wind and rain, can become a major issue. There is one drain hole at each of the four corners of the sunroof, easily visible when the sunroof is opened. Each small hole is connected to a hose, leading to the front and rear of the car. If the sunroof drain holes are clogged, it can easily damage the interior and the sunroof motor. 2. Cleaning after clogging: If there is a clog, it can be cleared by using a syringe with a catheter for injection. Insert the catheter into the sunroof drain hole and quickly inject clean water from the syringe into the hose. Repeat this process several times to complete the cleaning. Alternatively, you can use hard objects like iron wires to unclog the hole, but be careful not to scratch the surrounding rubber seals, as this would be counterproductive.
18
4
Share

What are the high-end brands under Geely?

Geely Automobile mainly has four sub-brands: Englon, Shanghai Maple, Emgrand, and Gleagle. 1. Englon: Produced by a joint venture established by Geely Group and British Manganese Bronze Holdings in Shanghai, it mainly manufactures the classic London black taxi TX4 and its series products. Current main products include Geely Englon SC3, Geely Englon SC7, King Kong, SX7, SC5-RV series, and SC7 series. 2. Shanghai Maple: Born in Shanghai, Maple integrates the city's fine spirit into the core value of its products and brand, allowing users to perceive and associate Shanghai's internationalism, advancement, inclusiveness, fashion, sophistication, and value-for-money when using Maple products. This is the vision of Maple's culture in car manufacturing. 3. Emgrand: With 'Excellence, Steadiness, and Prestige' as its brand proposition, Emgrand represents Geely Automobile's development direction in safety, energy efficiency, and environmental protection. It both inherits and breaks through Geely's existing models. If Geely's current models are still following multinational companies, Emgrand's models will play the role of surpassers, integrating global resources to provide consumers with the safest and most environmentally friendly independent high-end cars with the most competitive cost performance. 4. Gleagle: The brand logo of Gleagle is oval in overall outline, a shape that combines dynamic and stable features in graphics, symbolizing the background of globalization and indicating Geely's dynamic and steady development prospects in the global market.
14
1
Share

Is it necessary to clean carbon deposits in a car engine?

Cleaning carbon deposits in a car engine is necessary. Since there is currently no complete method to prevent the formation of carbon deposits, if they are not cleaned regularly, carbon deposits will accumulate endlessly. Once carbon deposits build up, symptoms such as engine shaking and reduced power may occur. In severe cases, it can even lead to engine cylinder scoring, cylinder explosion, or knocking issues. Therefore, regular cleaning of engine carbon deposits is essential. The main causes of carbon deposits include: 1. Prolonged heavy-load operation; 2. Frequently pressing the accelerator heavily at low RPM; 3. Long periods of idling or low-speed operation; 4. Excessive warm-up time after a cold start; 5. Driving at low RPM in high gear.
16
4
Share

Where is the car air conditioning temperature control switch located?

Car air conditioning temperature control switch is located on the air conditioning operation panel, and the temperature sensor is installed at the air conditioning air inlet. The working range of the car temperature control switch is generally between 85 to 105 degrees Celsius. The working process of the car temperature control switch consists of a wax temperature-sensitive driving component and a two-stage contact action mechanism. It utilizes the sudden volume expansion of paraffin when it changes from solid to liquid state under heat to move the push rod, thereby controlling the opening and closing of the contacts. The car temperature control switch uses high-quality disc-shaped bimetallic strips as temperature sampling elements. The water temperature switch is installed at the temperature-sensitive part of the radiator, dynamically collecting the temperature changes of the water inside the radiator. The disc-shaped metal strip deforms under temperature, causing the two contacts to quickly connect, starting the fan to cool the water in the radiator, thereby providing safety protection for the car engine.
19
1
Share

What brand is Mustang?

Mustang is a brand under Ford. The Mustang is a sports car launched by Ford Motor Company, with dimensions of 4778mm in length, 1877mm in width, and 1417mm in height, and a wheelbase of 2720mm. In terms of power, this car uses two engines: one is a 2.3-liter turbocharged four-cylinder engine, and the other is a 5.0-liter naturally aspirated V8 engine. In terms of appearance, the front face of this car features a large-area grille, which better highlights the car's sporty temperament. From the side, the waistline adopts a continuous design, visually elongating the car's length and emphasizing its sporty texture.
15
4
Share

How many liters of oil should be added to the BMW N20 engine?

BMW N20 engine requires 5 liters of oil. After adding oil, it is necessary to observe the dipstick to check whether the oil level is within the normal range. If there is too much or too little oil, it needs to be extracted or added. After completion, the vehicle should be started and run at idle speed for 5 to 10 minutes. Engine oil, also known as engine lubricant, can lubricate and reduce wear, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. Taking the BMW X2 as an example, this car adopts front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The steering assistance type is electric power steering, and the body structure is unibody.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.