How to Turn Off the Air Conditioning in a Volkswagen?

3 Answers
JosephineLynn
07/28/25 4:51pm
To turn off the air conditioning in a Volkswagen, follow these steps: 1. For manual air conditioning: Press the AC button on the center control panel once. 2. For automatic air conditioning: Press the AUTO button once. Functions of the air conditioning: 1. Achieves cooling effect by continuously cycling refrigerant. 2. Draws in fresh air from outside for ventilation and air exchange, preventing window fogging. 3. Uses engine coolant, waste heat, or heat generated by a burner as a heating source, warming the air through the heater and distributing it into the cabin via the blower to raise the temperature for heating. 4. Removes dust, odors, smoke, and toxic gases from the cabin air, freshening the air and humidifying it to increase relative humidity.
Was this review help?
14
0
Share
VanSadie
08/11/25 9:02pm
Turning off the air conditioning in a Volkswagen is actually quite simple. Having driven a Volkswagen for ten years, I'm accustomed to their design. For manual air conditioning, just turn the large fan speed knob counterclockwise to the lowest position 0 to stop the airflow. For automatic air conditioning, there's an OFF button on the central control screen or panel—a light press will shut down the entire system. After turning it off, it's advisable to open the windows for ventilation, which not only saves fuel but also allows natural air circulation inside the car, especially during traffic jams to avoid stuffiness. In daily use, I've found that after turning off the air conditioning, checking the temperature knob set to heating mode ensures warmth in winter without cooling. If the buttons respond slowly, cleaning the control panel can prevent dust buildup issues.
Was this review help?
13
1
Share
Expand All
JuliaFitz
09/29/25 7:50am
Last time I drove my friend's Volkswagen Golf, the air conditioning was so cold that it froze me badly. I felt much better only after turning it off. On the left side of the Volkswagen's AC control panel, there's a large knob with a fan icon. Turning it counterclockwise to the minimum mark '0' stops the airflow. For automatic AC models, simply press the OFF button on the screen to turn it off with one click. After turning it off, the car immediately becomes much quieter, allowing you to enjoy some music and relax. To save fuel, I often turn off the AC and roll down the windows for a breezy drive, reducing emissions in the city. Remember to adjust the temperature control knob back, as the heater can also be used independently. If the buttons don't respond, it might be a contact issue—try gently wiping the panel.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

How to Adjust the Driver's Seat?

Ensure that the height of your eye level is positioned slightly above the center of the vertical distance of the vehicle's front windshield. The seat can be adjusted in many angles. Of course, depending on the vehicle's configuration level, the number of adjustable angle switches may vary. The position of the steering wheel should be adjusted according to the position of the seat.
20
4
Share

How to Mix Paint for Spray Painting?

First, match the color using color cards and color codes, and it's essential to understand the properties of the base color. Secondly, if you're not entirely confident about the color accuracy, you can start by preparing a small test batch according to the formula. Finally, practice makes perfect in this craft. Mastering color perception and technical proficiency are essential skills in every industry.
16
2
Share

How to Open the Hood of a Passat?

Locate the hood release lever on the left side of the driver's footwell. The method of opening may vary depending on the model year. Feel for the mechanism underneath. Typically, there is a metal latch—press it and gently lift the hood to release. Finally, find the support rod to prop up the raised hood securely.
13
1
Share

How to Turn on the Ambient Lights in a Mercedes-Benz GLC?

Simply rotate the knob at the top of the light control lever to switch between different lighting modes. However, this operation needs to be performed with the ignition on. To turn on the high beams, first rotate the light knob to the low beam position, then push the light control lever forward to activate the high beams. Press the fog light switch next to the light knob to turn on the fog lights. The automatic headlights can be activated through the central control settings.
19
2
Share

Can Rearview Mirrors Be Repainted?

Rearview mirrors can be repainted. Carefully inspect the damaged area; if the damage exceeds one-third of the component, an over-repair method should be used for restoration. Waxing: Waxing is divided into direct waxing and polishing waxing. Direct waxing involves cleaning the car body and applying wax directly to the clear coat on the surface of the paint. Polishing waxing, on the other hand, requires using a polishing machine to polish the paint surface before applying wax. This method can instantly make the car look shiny. Glazing: Due to the composition of the glaze, it is not resistant to acid and alkali cleaning and can be easily damaged. It typically lasts only 1-3 months, and glazing can harm the car paint, requiring reapplication every two to three months. Crystal Coating: Crystal coating is a hard protective layer specifically designed for the care of key areas such as the car's paint surface, seats, interior and exterior trim, glass, and tires. It comes in quick-drying and slow-drying types, mainly determined by the primary ingredients. Film Application: Car coating is a highly protective measure that can brighten the paint surface while also providing multiple effects such as resistance to acids and alkalis, high temperature resistance, strong waterproofing, oxidation resistance, and UV protection.
12
0
Share

How to Perform a Walk-Around Vehicle Inspection as a Driver?

During the walk-around inspection, the trainee must visibly check the vehicle's exterior and confirm safety before opening the door. The inspection of all four tires should be clearly visible. Check whether all vehicle doors are properly closed. Check for any unsafe factors in the surroundings that may affect the vehicle's start. Also, pay attention to the traffic conditions in front of and behind the vehicle. Observe the rear traffic again before opening the door.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.