How to Turn Off the Air Conditioning in a Passat?

2 Answers
LuciaLee
07/24/25 1:08am
The method to turn off the air conditioning in a Passat is to press the AC button on the air conditioning panel below the central control screen. Taking the 2020 Business Edition Passat (China VI) as an example, its body dimensions are: length 4933mm, width 1863mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 66L, trunk capacity 521L, and curb weight 1455kg. The 2020 Business Edition Passat (China VI) features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
Was this review help?
18
0
Share
DeHarper
08/10/25 8:51pm
Having driven a Passat for over a decade, I'm very familiar with its air conditioning operations. Turning off the AC is quite simple - just locate the button with the AC symbol on the control panel and press it until the indicator light goes off. Alternatively, if there's a power symbol or OFF button on the panel, you can press that directly. I recommend lowering the temperature setting before switching it off to avoid uncomfortable temperature differences, which is especially helpful for long drives to save fuel and protect the engine. After turning off the AC, the engine load decreases, reducing fuel consumption by about 10%. Remember to open windows for ventilation and regularly clean the filters to prevent odors. These daily habits have helped me avoid many car issues and extend component lifespan.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What to Do If the Ford Focus Differential Is Leaking Oil?

The solution for a leaking differential in a Ford Focus is to replace the differential oil seal. The function of the differential is to meet the requirement for different wheel speeds when the car is turning. The car differential enables the left and right (or front and rear) drive wheels to rotate at different speeds. It mainly consists of left and right half-shaft gears, two planetary gears, and a gear carrier. The steps to replace the car differential oil are as follows: 1. First, lift the car and place a large container underneath to catch the waste oil. Use an appropriate screwdriver to remove the inner and outer casings of the transmission. Some transmission oil will flow out at this point, so be careful to avoid it. 2. When most of the oil has drained, remove the last oil pan, being careful to support it by hand as it still contains a significant amount of waste oil. 3. Remove the oil pan gasket and clean the surrounding area. If the gaps are not clean enough, use tools and cotton cloth to thoroughly clean all the filtered transmission oil components, then reinstall them one by one. 4. Wipe the surfaces of the replaced parts clean, ensuring there are no water or oil stains, as these can cause leaks. Install the cleaned oil pan and gasket together and add the manufacturer-recommended oil. Check the oil level through the fill hole to ensure it is full. If the oil is full, it will start to flow out of the observation hole.
11
0
Share

What should you buy to keep in a new car?

For a new car, you should purchase items like an umbrella, bamboo charcoal bags, a flashlight, and a car cover to keep inside. Below are some important considerations regarding items placed in the car: 1. Flammable items in the car: Car perfumes, lighters, and similar items are flammable, especially during hot summer months. Avoid placing these items in the car as high external and internal temperatures can easily lead to explosions or fires. 2. Unsuitable decorations: Avoid placing decorations with sharp edges inside the car. If the edges of these decorations face the occupants, it can easily lead to accidents. Particularly, if sharp edges face the driver, it may result in serious injuries.
3
4
Share

Do You Need to Press the Brake When Shifting Gears While Driving an Automatic Transmission?

For an automatic transmission car, you only need to press the brake when shifting to the P (Park) gear. For other gears, normal manual control is sufficient, and no assistance from the right foot is required. The reason for pressing the brake in P gear is that there is a control lock valve in the P position, which must be released by pressing the brake before the gear can be shifted from P to other positions. Additional Information: Shifting techniques for different gears in an automatic transmission are as follows: 1. P Gear (Park). This is the parking gear, which uses a mechanical device inside the transmission to lock the rotating parts of the car. It should only be used when the vehicle is completely stopped. 2. N Gear (Neutral). This is the neutral gear. For short stops, you can shift to neutral, allowing the right foot to rest off the brake pedal. However, on slopes, you should still press the brake to prevent rolling unless the handbrake or electronic brake is engaged. 3. D Gear (Drive). This is the forward driving gear. When in D gear, the driver only needs to control the accelerator pedal to adjust the speed, and the transmission will automatically determine the appropriate gear based on the throttle input and vehicle speed. 4. R Gear (Reverse). This is the reverse gear. It is important to ensure the vehicle is completely stopped before shifting to R gear to avoid transmission wear. 5. S Gear (Sport). This is the sport mode. In this mode, the engine maintains higher RPMs for greater power, suitable for pursuing speed, but it also increases fuel consumption.
17
3
Share

Does New Energy Vehicle Insurance Cover the Battery?

Since the insurance for new energy vehicles basically follows the traditional car insurance model, there is currently no separate insurance specifically for the battery. Here is some relevant information about new energy: 1. Definition: New energy, also known as non-conventional energy, refers to various forms of energy other than traditional energy sources. It includes energy sources that are just beginning to be developed or are under active research and awaiting promotion, such as solar energy, geothermal energy, wind energy, ocean energy, biomass energy, and nuclear fusion energy. 2. Characteristics: These energy sources are abundant and generally renewable, providing sustainable use for humanity. However, they have low energy density and require large spaces for development and utilization.
2
4
Share

How many interior color options are available for the Haval F7?

The Haval F7 offers a total of two interior color options, which are relatively limited in terms of personalization. The available colors are black and brown-black. The interior color choices are not as youthful and vibrant as the exterior. It is suggested that more options like red or beige could be added to enhance the overall design aesthetic. The dashboard is tilted towards the driver's side for easier operation. Personally, I think black is a better choice as it is more resistant to dirt. The Haval F7 is the second model in Haval's F series, launched on the evening of November 6, 2018, at the Shanghai Carbon Studio in the form of a masked singer program. The Haval F7 is the flagship model of the Haval F series, an AI intelligent connected SUV. The new car comes in two versions, 1.5GDIT and 2.0GDIT, with a total of six models, priced between 109,000 yuan and 149,000 yuan.
6
4
Share

Where is the GPS usually installed?

GPS is usually installed inside the front and rear bumpers, in the trunk, under the decorative panel below the front windshield, inside the spare tire, on the dashboard, under the A-pillar, and below the steering wheel. The vehicle GPS system is a radio navigation and positioning system based on 24 global positioning satellites, providing all-weather three-dimensional position, three-dimensional speed, and other information worldwide. Inside the front and rear bumpers: This is the most common installation location because it is very concealed, and most people won't notice it, making it secure enough. Additionally, the bumper's concave and convex design makes it ideal for installing the GPS in the grooves. Inside the trunk: The car's trunk is very spacious, offering many possible installation spots. Basically, laying a blanket in the trunk is enough to cover the GPS and prevent it from being discovered. Under the decorative panel below the front windshield: Unless the front panel is removed, it is impossible to detect the GPS in this location. Inside the spare tire: This is also very concealed, but there is a drawback. This method generally only applies to spare tires mounted on the rear of the vehicle, not those stored inside the trunk. This is because the multiple layers of metal in the trunk, spare tire, and spare tire metal box can significantly interfere with the GPS signal. Dashboard, A-pillar, and below the steering wheel: If wiring is involved, it is usually installed on the dashboard, under the A-pillar, or below the steering wheel.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.