···
Log in / Register

How to Turn Off Tesla's Anti-Glare Rearview Mirror?

4 Answers
AngelaMarie
09/03/25 3:29am

When the anti-glare lever under the rearview mirror is pulled backward, the entire mirror surface will fold downward by approximately 10°. At this point, the manual anti-glare rearview mirror can be turned off. Press the rearview mirror switch button to turn it off.

Was this review help?
19
4
Share
ErinFitz
09/15/25 5:12am

Speaking of Tesla's auto-dimming rearview mirror, I've been driving a Model 3 for over a year. The feature works automatically and is quite considerate, though occasionally it might mistakenly dim the mirror in low-light conditions like rainy days or dark garages, making it hard to see. Turning it off is simple: after starting the car from the driver's seat, tap the control menu at the bottom of the central touchscreen, scroll to find the Safety & Security option, where you'll see the rearview mirror settings. Just toggle the auto-dimming switch to the off position. Originally, it uses sensors to detect rear light intensity for anti-glare purposes. Once turned off, the mirror brightness stays fixed, but you might get dazzled by headlights from vehicles behind at night. I recommend keeping it on for safety, unless in specific situations like during maintenance when you might want to temporarily disable it. Tesla's system is efficiently designed—the auto mode eliminates manual adjustments, far more convenient than traditional mirrors. After years of driving, this detail really enhances driving comfort.

Was this review help?
14
4
Share
Expand All
DelAnthony
10/29/25 5:49am

To turn off Tesla's auto-dimming rearview mirror, the steps are straightforward: Open the main menu on the screen, tap the Controls tab, select the Vehicle Safety section, then scroll to the Auto-Dimming Mirror option and simply toggle the switch off. The principle involves a light sensor that continuously monitors rear brightness, automatically darkening the reflective surface to prevent glare. Once disabled, the mirror won't respond to light changes, but you may experience discomfort from strong headlights during nighttime highway driving. Settings save automatically, though the system may revert to defaults upon next vehicle startup. I've personally tested this feature during dusk with stationary headlight checks—its safety-first design proves highly practical. Tesla's integration of digital controls streamlines operation compared to mechanical buttons, though regular drivers are advised against casually disabling it.

Was this review help?
1
1
Share
Expand All
Asher
12/12/25 6:02am

Turn off the anti-glare function? Here's how: Tap the control menu on the screen, go to the Safety & Settings section, find the rearview mirror option, and disable auto-dimming. I tried this on my Model Y when it overreacted in low-light conditions—turning it off immediately restored normal mirror reflection. But don't keep it off while driving to avoid being dazzled by headlights from behind at night. Tesla's default auto-setting is actually great—it's hassle-free. The setup only takes a step or two with a few screen taps. Safety first—it's best to keep this feature enabled.

Was this review help?
13
4
Share
Expand All
More Forum Discussions

How to Clean Car Radiator Scale with White Vinegar?

White vinegar cannot be used to clean car radiator scale. The method to clean car radiator scale is: 1. Add radiator cleaner into the radiator filler opening for soaking and cleaning; 2. Drain the cleaner after 20 to 30 minutes; 3. Rinse the radiator and pipes thoroughly with water to complete the process. The car radiator is a key component in the cooling system, whose function is to absorb heat from the engine block, maintaining the engine at an appropriate working temperature and improving engine efficiency. The working principle of the car radiator is that high-temperature coolant flows from the engine to the radiator via the water pump, cools down through the radiator, and then returns to the engine to maintain the engine's appropriate temperature.
12
5
Share

What is synthetic oil?

Full synthetic oil is a high-grade lubricant among motor oils, derived from ethylene and propylene dispersed from natural gas or crude oil gas, which undergo polymerization, catalysis, and other complex chemical reactions to form a lubricating fluid composed of large molecules. The functions of motor oil are: lubrication and anti-wear, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Classification of motor oils: conventional mineral oil; semi-synthetic oil; full synthetic oil. The method for changing motor oil is: Lift the car, remove the underguard, and place a container of about 10 liters under the drain plug; Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after draining and wipe with a tissue to check for leaks; Reinstall the underguard and lower the car, then use a funnel to align with the oil filler port to add new oil.
7
1
Share

What is the method to reset the maintenance light on a Passat?

Passat maintenance light reset method is: 1. Press the menu button to display the main menu interface on the instrument screen; 2. Select the maintenance and inspection option; 3. Find and click into the maintenance cycle in the sub-menu interface, then confirm by pressing the knob. Car maintenance items include: 1. Replace engine oil and oil filter; 2. Replace oil filter element, air filter element, fuel filter element, air conditioning filter element, transmission oil filter element; 3. Add windshield washer fluid, antifreeze, air conditioning refrigerant; 4. Check if the drive belt is worn; 5. Clean throttle valve and cylinder carbon deposits; 6. Check for chassis damage; 7. Inspect body and tires.
17
1
Share

How to Turn Off the Rear Wiper on Lian Dong Car Sharing Vehicles?

The method to turn off the rear wiper on Lian Dong Car Sharing vehicles is: 1. Sit in the driver's seat; 2. Place your hand on the right side of the steering wheel; 3. Locate the gear switch, which is usually a separate component; 4. Toggle it up or down to turn off the rear wiper. The function of the wiper is to remove rain, debris, and dust from the vehicle's windshield, improving the driver's visibility and enhancing driving safety. The steps to replace a car wiper are: 1. Lift the wiper upright; 2. Press the clip below to remove the wiper blade; 3. Take off the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand, and the replacement is complete once you hear a click.
12
4
Share

What is the difference between dual rubber wiper blades and ordinary wiper blades?

The difference between dual rubber wiper blades and ordinary wiper blades lies in their durability: the durability of single-blade dual-track wiper blades is twice that of ordinary single-tip wiper blades. The usage method of wiper blades is as follows: 1. Locate the wiper control lever at the lower left of the steering wheel; 2. Push the wiper lever up one gear to start the wiper operation; 3. To turn off the wiper, push the lever down to the off position. The method to use the wiper washer is: press the wiper switch on the left-hand stalk of the steering wheel to activate the wiper washer. The replacement method for wiper blades is: 1. Lift the wiper blade upright; 2. Press the clip below and remove the wiper rubber; 3. Take off the wiper blade; 4. Lift the front end of the middle clip; 5. Insert the wiper blade into the middle clip, pull it tight by hand until you hear a click sound, and the replacement is completed.
12
4
Share

Do Tires Need to Be Replaced If the Grooves Are Cracked?

Tire groove cracking indicates that the tire has aged and can no longer be used, requiring immediate replacement. Precautions for replacing tires: Choose the right tire: The specifications of the tire must match those of the other tire on the same axle. Replace the valve stem as well: After replacing the tire, the aging cycles of the new tire and the valve stem differ. During the new tire's cycle, the valve stem may develop issues. New tires are best installed on the rear axle of the vehicle: If more worn tires are placed on the rear axle, it reduces the rear wheels' water drainage capability, thereby increasing the risk of driving in rainy conditions. Tires should not be used further under the following circumstances: The tire is already worn. Tires have tread wear indicators with a height of 1.6 mm (the legal minimum groove depth). Using worn tires on wet roads can lead to "hydroplaning," increasing the risk of losing control. The tire is damaged. Hitting curbs, falling into potholes, or punctures from nails can severely damage tires. Damaged tires may be repairable, but only a professional repair shop can accurately determine whether the tire can be repaired or needs to be replaced. The tire has aged. If tread deformation or significant cracking is observed, stop using these tires immediately and have them inspected by a professional repair shop to determine if they can still be used. The tire has a bulge. Tire bulges are a high-risk factor for blowouts, especially on highways. Tires with bulges should be replaced promptly.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.