How to Turn Off i-stop?

1 Answers
DelNadia
07/29/25 6:53pm
i-stop can be turned off by using the i-stop off button, located on the lower left panel of the steering wheel. Press and hold this button for more than 2 seconds to toggle the i-stop function on or off. When i-stop is on, the dashboard displays i-stop in green; when off, it shows in orange. i-stop, known as Auto Start-Stop in Chinese, is designed for the engine's start-stop function. The Auto Start-Stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move again. This system significantly reduces fuel consumption and exhaust emissions.
Was this review help?
4
1
Share
More Forum Discussions

Differences Between Sinopec and CNPC

The following are the specific differences between Sinopec and CNPC: 1. Different use of crude oil: China's oil fields are mainly located in the northern regions, and most of these domestic crude oils are refined by CNPC, with only about 30% relying on imports, so CNPC primarily uses domestic oil. Sinopec's crude oil is mostly imported, mainly from the Middle East. 2. Different oil density: In terms of oil density, CNPC's gasoline density is around 0.72-0.73, while Sinopec's gasoline density is around 0.75-0.77. 3. Different sales regions: In the past, CNPC mainly dominated the northern market, while Sinopec was rooted in the southern market, dividing the country into north and south.
14
5
Share

What is the fuel consumption per 100 kilometers for the Coaster?

The fuel consumption per 100 kilometers for the Coaster is 14.6L. Below are the detailed specifications of the Coaster: 1. Vehicle Positioning: The Coaster is positioned as a high-end medium-sized bus. 2. Powertrain: The Coaster is equipped with a 4.0L V6 engine (6GR-FE), with a maximum output power of up to 171kW. Additionally, this engine features several new technologies, including a dual VVT-i system, a high compression ratio of 10.4, and optimized piston design, enhancing both driving performance and fuel efficiency. 3. Suspension: The Coaster's high-end model specifications have been upgraded to include a double-wishbone independent suspension, similar to that of luxury vehicles, further improving ride comfort.
1
4
Share

What is the fuel consumption of the Audi Q3 1.4T?

The official combined fuel consumption of the Audi Q3 1.4T provided by the Ministry of Industry and Information Technology is 6.3L/100km. The actual fuel consumption may vary by up to 10% depending on the driver's habits and road conditions. Below are some key details about the Audi Q3 1.4T: 1. Configuration: The Audi Q3 comes standard with 8 airbags, a leather multifunction steering wheel, automatic air conditioning, etc. 2. Powertrain: It is equipped with a 1.4T engine and 2.0T high and low power engines, paired with a 7-speed Stronic dual-clutch transmission. The two higher-end models also feature the quattro all-wheel-drive system.
19
2
Share

What is the service life of a motorcycle?

According to the new national regulations, the service life of a motorcycle is 10 years, which can be extended by 3 years. However, during the 3-year extension period, it requires a semi-annual inspection, and only after passing the inspection can the extension be granted. After reaching 13 years, the motorcycle must be mandatorily scrapped. Below is relevant information about motorcycles: 1. Introduction: A motorcycle is a two or three-wheeled vehicle powered by a gasoline engine, steered by handlebars for front-wheel turning. It is lightweight, flexible, and fast, widely used for patrols, passenger and cargo transportation, and also serves as sports equipment. 2. Classification: Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. 3. Basic Components: A motorcycle consists of five main parts: the engine, transmission system, running gear, steering and braking systems, and electrical instrumentation equipment.
2
3
Share

Can You Add 92 Octane Gasoline When There's Still 95 Octane Left?

Occasionally mixing 92 octane gasoline into a vehicle designed for 95 octane fuel has no significant impact, as gasoline is a mixture and the compositions of different octane ratings are very similar. However, it is not recommended to mix 92 octane gasoline for long-term use. 95 octane gasoline has a higher octane rating than 92 octane, and using 92 octane may cause knocking or pre-ignition, severely affecting the engine's performance and fuel economy. Long-term mixing of different octane ratings can also reduce the lifespan of the car's ignition system, fuel injectors, and spark plugs, leading to earlier major maintenance. In severe cases, it may even damage the engine. The octane rating is an indicator of anti-knock performance and is essentially unrelated to cleanliness, power, or combustion value. Higher octane gasoline provides better resistance to engine knocking. The differences between 92 octane and 95 octane gasoline are as follows: Different Octane Ratings: 92 Octane Gasoline: Contains 92% isooctane and 8% n-heptane. 95 Octane Gasoline: Contains 95% isooctane and 3% n-heptane. Difference in Fuel Quality: The octane rating represents the fuel's resistance to knocking. Higher octane fuel has better anti-knock properties, allowing the engine to run more smoothly, reducing wear and tear, and providing better protection for the engine. Different octane ratings result in varying anti-knock performance. Gasoline is a mixture produced by blending a base gasoline with a certain amount of anti-knock additives, resulting in fuels with different anti-knock properties. Different gasoline components, such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline obtained from petroleum refining, are refined and blended with high-octane components, primarily used as fuel for spark-ignition internal combustion engines. The chemical compositions of these two fuel types are quite similar, but 95 octane gasoline offers higher fuel efficiency and provides more power to the vehicle. Generally, naturally aspirated cars use 92 octane gasoline, while turbocharged cars use 95 octane. Refueling Precautions: While Refueling: Turn off the engine, avoid using phones or making calls, and do not use open flames in the gas station. Do not use phones or make calls inside the station. Always turn off the engine when refueling. If there is a queue, wait in line and avoid cutting in. When Choosing Fuel: Always choose reputable gas stations with high-quality fuel and avoid those with poor-quality gasoline. Long-term use of low-quality gasoline can lead to increased carbon deposits in the engine. It is important not only to select a reliable gas station but also to use the correct octane rating for your vehicle.
19
3
Share

What is the fuel consumption of the Cadillac CT4?

The fuel consumption of the Cadillac CT4 is 6.7-6.8L/100km. The currently available Cadillac CT4 models include the 2022 28T Luxury, Premium, and Style editions, all with a fuel tank capacity of 66 liters. A full tank can run for approximately 97-98 kilometers. Among vehicles in the same class, the Toyota Avalon has a NEDC combined fuel consumption of 4.3-6.2L/100km, the Buick LaCrosse has 6.5-6.9L/100km, the FAW-Volkswagen CC has 6.4-7.0L/100km, the Volkswagen Passat has 5.8-6.7L/100km, and the Buick Regal has 6.3-6.6L/100km. The fuel consumption of a car is directly influenced by five main factors: driving habits, the car itself, road conditions, natural wind, and ambient temperature. Details are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also tend to have higher fuel consumption due to the need for greater driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance, leading to higher fuel consumption. Low ambient temperatures: When the engine block is cold, the injected gasoline does not atomize easily during a cold start, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in cold weather, the engine control unit may command higher idle speeds to warm up the engine, further increasing fuel consumption.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.