How to Turn Off Car Ambient Lighting?

2 Answers
AndersonAnn
07/30/25 1:15am
To turn off the car ambient lighting, locate the light control knob on the left side at the bottom of the steering wheel. Rotate this knob counterclockwise back to its original position to turn it off. To turn it on, press the knob 1 to 2 millimeters and rotate it counterclockwise to the end. Car ambient lighting is a decorative illumination typically in red, blue, or green, designed to enhance the cabin's appearance at night. The adjustment method is as follows: 1. Turn on the screen and press the CAR button at the bottom left, then click on Settings; 2. In the settings interface, select the Ambient Lighting option; 3. Click on the Manual option, drag the selection bar to choose the color, and adjust the brightness accordingly.
Was this review help?
7
4
Share
LeJason
08/15/25 6:51am
As a veteran driver with over a decade of experience, I'm quite familiar with turning off ambient lighting. Most models have dedicated buttons or knobs on the center console with a light icon - just press it to turn off. Some newer cars with touchscreens make it even simpler: enter "Vehicle Settings" from the main menu, locate the "Interior Lighting" option, and toggle it to "Off". Turning off the lights saves power and provides clearer nighttime visibility without distractions. I also recommend regularly cleaning the control panel to prevent dust buildup causing button malfunctions. If you can't turn them off, it might be a blown fuse or software glitch - check the manual or visit the dealership for an update. Honestly, ambient lighting creates nice atmosphere, so it's personal preference whether to keep it on, but safety always comes first. On long drives, I always turn it off for a more peaceful cabin.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What is the ground clearance of the Lynk & Co 01?

The minimum ground clearance (unladen) of the Lynk & Co 01 is 211mm, and the ground clearance when fully loaded is 170mm. Introduction to ground clearance: Ground clearance refers to the distance between the ground and the rigid parts at the bottom of the vehicle. The ground clearance of a vehicle varies depending on whether it is unladen or loaded. Ground clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with lower ground clearance have a lower center of gravity but poorer off-road capability. Impact of minimum ground clearance: The greater the minimum ground clearance, the better the vehicle's ability to pass over obstacles or uneven terrain, but the higher center of gravity reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower center of gravity increases stability.
14
0
Share

What Causes the Golf Display Screen to Go Black?

Golf display screen blackout may be caused by issues with the vehicle's power supply voltage. Here are detailed explanations and solutions: Vehicle power supply voltage issues: The solution is to first investigate the stability of the vehicle's power supply voltage to rule out the possibility of voltage fluctuations. Car navigation cable problems: The solution is if the voltage is stable, then check the cables on the back of the device for any issues, which can be resolved by replacing the connections. If there are no contact issues, inspect the display cable of the device; if problems are found, replace it with a new one for testing.
20
1
Share

What causes the airbag light to flash in a Tiida?

The flashing airbag light in a Tiida may be due to loose wiring in the airbag device, a faulty sensor in the airbag device, or a weak battery. Here are detailed explanations and solutions: Loose wiring in the airbag device: Loose or poor contact in the airbag device wiring. There are airbag device wires under the car seat, which may have been accidentally kicked or disturbed by rear-seat passengers, causing them to loosen. The solution is to simply reconnect all the plugs. Faulty sensor in the airbag device: This requires inspection and repair at a professional auto repair facility or 4S shop. Weak battery: A weak battery or abnormal reception device code may be the cause. This requires a professional to check the battery voltage or use a diagnostic device to examine the code and troubleshoot the issue.
6
5
Share

What's the matter with the indirect tire pressure monitoring failure in Golf?

Golf indirect tire pressure monitoring failure may be due to issues with the tire pressure detector or prolonged driving with low tire pressure. Here are detailed explanations and solutions: Problems with the tire pressure detector: The solution is to regularly check whether the tire pressure detector is functioning properly. If the tire pressure monitor does not alert in time when the car has issues, it indicates a problem with the tire pressure monitor. Prolonged driving with low tire pressure: The solution is to stop and rest or replace the spare tire in time. This situation usually occurs when the tire pressure of a certain tire is too low, and high-speed operation causes the tire temperature to rise, leading to an increase in tire pressure.
1
5
Share

What are the reasons for the high fuel consumption of Mazda 6?

The reasons for the high fuel consumption of Mazda 6 include low-quality fuel, severe engine carbon deposits, and excessive vehicle weight. Here are the detailed explanations and solutions: Low-quality fuel: When the fuel added to the car is of low quality, the fuel and mixed gas cannot burn fully in the engine, leading to partial fuel wastage and consequently increased fuel consumption. This situation can be mitigated to some extent by using higher-quality fuel. Severe engine carbon deposits: When the engine carbon deposits are too severe, the fuel cannot be transported normally, resulting in increased fuel consumption and weakened power. In this case, it is necessary to clean the engine carbon deposits promptly. Excessive vehicle weight: When the vehicle weight is too high, it increases the burden on the engine, leading to higher fuel consumption. To address this, the vehicle weight should be reduced.
3
0
Share

How Many Liters of Engine Oil Does the Lynk & Co 02 Require?

According to the manufacturer's manual, the Lynk & Co 02's recommended engine oil specifications are as follows: For the 1.5T version engine, it is recommended to use RBS0-2AE0W-20 engine oil; the oil capacity (with oil filter) is approximately 5.6L, and the oil capacity (without oil filter) is approximately 5.3L. For the 2.0T version engine, it is also recommended to use RBS0-2AE0W-20 engine oil; the oil capacity (with oil filter) is approximately 5.6L, and the oil capacity (without oil filter) is approximately 5.2L. To check the engine oil level: The oil level can be viewed on the dashboard. Without pressing the brake pedal, hold the start button alone for ten seconds, and the oil level will be displayed on the dashboard. When checking, ensure that all four wheels of the car are parked on the same level surface without any tilt. If the car body is tilted, the oil level in the oil pan will change, leading to inaccurate measurement results.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.