How to Turn Off BMW Maintenance Reminder?

1 Answers
LeJesse
07/29/25 5:05pm
To reset the BMW maintenance reminder: 1. Press and hold the left button on the instrument panel while turning on the ignition, keeping the button pressed for more than 5 seconds. 2. When "SRV" appears on the display, release the button, and the display will flash. 3. Press the left button once again to complete the reset. Taking the BMW 5 Series as an example: its dimensions are 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm, equipped with an 8-speed automatic transmission. The BMW 5 Series has a fuel tank capacity of 68L, with the engine delivering a maximum power of 135 kW and a maximum power speed range of 5000 to 6500 rpm.
Was this review help?
8
1
Share
More Forum Discussions

Is Brake System Maintenance Necessary?

Brake system maintenance is necessary. The following is the relevant content introduction: 1. Regular maintenance: The brake is one of the important systems of a car, and it operates in a very harsh environment. If this system fails, there will be danger at any time, so it is necessary to regularly inspect and maintain the brake system. 2. Brake system maintenance time: (1) Disc front wheels about 30,000 kilometers, disc rear wheels about 60,000 kilometers, drum brakes about 100,000 kilometers. (2) The brake system is the key to ensuring safety, and the replacement cycle is only a rough reference. The focus is on thickness, and early inspection is the safest.
17
0
Share

Differences Between Open Gears and Enclosed Gears

Open gears and enclosed gears have the following specific differences: 1. Working aspect: Enclosed gear transmission means the gears operate in a sealed space with an enclosed housing, good lubrication, and a clean working environment. Open gear transmission means the gears operate in a non-sealed space with grease lubrication and a dusty working environment. 2. Application aspect: Open gears are used in large, low-speed, heavy-duty applications, employing periodic grease replenishment or drip lubrication. Enclosed gears, due to their cast or welded housings, have a more compact structure and can use oil bath lubrication.
14
2
Share

What is the function of 'off' in a car?

off is the shutdown function button of the car system. Here is more information about the OFF button: 1. OFF-related systems: Generally, many function buttons on a car have the OFF button, such as on other vehicle systems like the light switch, wiper switch, and cruise control switch, all of which will have the OFF mark. 2. The original intention of setting the OFF button in a car: The car off button means to turn off, which is the button to shut down the system. Some systems on the car are turned on by default, so the off button is set. If you want to turn off these auxiliary systems, click OFF to shut them down.
7
1
Share

Is it better to use 92 or 95 octane gasoline for turbocharged engines?

Generally, turbocharged engines require 95 octane gasoline. Below is relevant information about turbocharged engines: 1. Main function: The primary role of turbocharging is to increase engine intake air volume through a turbocharger, thereby enhancing the engine's output power and torque. 2. Working principle: The turbocharger in a turbocharged engine is essentially an air compressor that boosts intake air volume by compressing air. It utilizes the inertial impulse of exhaust gases from the engine to drive the turbine in the turbine housing, which in turn drives the coaxial impeller. The impeller then pressurizes the air delivered through the air filter pipe, forcing it into the cylinders under increased pressure.
5
5
Share

How to Use a Warning Triangle Correctly?

Correct usage of the warning triangle: 1. On regular roads, in case of vehicle breakdown or traffic accidents, the warning triangle should be placed 50 to 100 meters behind the vehicle; 2. On highways, the warning sign should be placed at least 150 meters behind the vehicle; 3. In rainy or foggy weather conditions, the distance should be increased to 200 meters. During specific usage, when an emergency stop is required due to an accident, the warning triangle should be placed directly behind the vehicle or in the same lane, not to the side or rear. Otherwise, it may not only fail to serve as an effective warning but could also mislead approaching vehicles, increasing the likelihood of secondary accidents.
12
5
Share

What is the Emission Standard of Emgrand?

Geely Emgrand complies with the China V emission standard. Below is the introduction and implementation timeline of the China V emission standard: Introduction to China V Emission Standard: The China V emission standard, officially known as the National Fifth Stage Emission Standard for Motor Vehicles, is equivalent to the Euro 5 emission standard currently implemented in Europe. The European Union began enforcing this standard in 2009, which imposes stricter limits on vehicle pollutants such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Each upgrade from China I to China IV reduces single-vehicle pollution by 30% to 50%. Implementation Timeline of China V Emission Standard: The China V standard was officially implemented nationwide starting from January 1, 2017.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.