How to Turn Off a Porsche 718?

What is the tire model of the Qashqai?

The Qashqai uses Bridgestone's TURANZA tires, with tire models of 215/55R18, 225/45R19, and 215/60R17. Bridgestone Corporation was established by Shojiro Ishibashi in 1931 in Kurume City, Fukuoka Prefecture, Japan, as a tire manufacturing plant. In the 2018 Fortune Global 500 rankings, it was ranked 365th. The company's English name is derived from the founder's surname, Ishibashi, translated literally. Bridgestone is the largest tire manufacturer in Japan and also the world's largest tire manufacturer. In Chinese, Bridgestone was once referred to as 'Ishibashi Brand,' but today the company uniformly uses the transliterated name 'Bridgestone.' For the Qashqai's tires in daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves on the tires gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be potential hazards for tire blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Park on flat ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park the car near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, the driver should not turn the steering wheel, as this will accelerate tire wear. Do not use water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, and the air pressure may increase. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent and hard braking to prevent accelerated tread wear from dragging the tires against the road.

7

5

Share

What Causes Loud Engine Noise During Cold Start?

Engine noise during cold start can be attributed to the following reasons: 1. The engine oil does not meet the standard or is overfilled, increasing the stirring resistance of the crankshaft connecting rod; 2. The oil viscosity is unsuitable; 3. Excessive engine carbon buildup, which aggravates wear on the cylinders and pistons; 4. Mixing different brands of engine oil; 5. Not changing the engine oil on time. Solutions to reduce loud engine noise during cold start include: 1. Refer to the maintenance manual or consider your driving environment and frequency to change the engine oil regularly; 2. Use the same brand or the same grade of engine oil; 3. Clean the three-way catalytic converter and throttle carbon buildup; 4. Use the gasoline grade recommended in the vehicle manual.

3

5

Share

Can You Still Drive When the Car Radiator Temperature is High?

You should not drive when the car radiator temperature is high. The handling methods are: 1. When the water temperature warning light turns red, pull over as soon as possible and check the vehicle's condition; 2. Do not rush to open the radiator cap; instead, check if the cooling fan is running and look for signs of blockage or damage in the radiator; 3. After the vehicle's water temperature has decreased, open the radiator cap to release pressure. The reasons for high car radiator temperature are: 1. Insufficient coolant; 2. Coolant has scale or is deteriorated; 3. Issues with the cooling system radiator. The maintenance methods for the car radiator are: 1. Avoid contact with any acids, alkalis, or other corrosive substances; 2. Use softened hard water to prevent internal blockage and scale buildup in the radiator; 3. During installation, avoid damaging the cooling fins or the radiator to ensure its cooling efficiency and sealing performance.

9

2

Share

What is the engine model of the Hyundai Fista?

Modern Fista engine models are G4LD and G4FJ. The engine model is the information used by the engine manufacturer to indicate the manufacturer, specifications, performance, characteristics, process, purpose, and product batch of the engine in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. The Hyundai Fista is a compact 4-door 5-seater sedan with a body size of 4660mm in length, 1790mm in width, 1425mm in height, a wheelbase of 2700mm, and a fuel tank capacity of 53 liters. The Hyundai Fista is equipped with a 1.6T turbocharged engine, with a maximum power of 140 kW, a maximum power speed of 6000 rpm, a maximum torque of 265 Nm, and a maximum torque speed of 1500 to 4500 rpm.

2

5

Share

What causes the central locking system of Excelle to jump?

The reasons for the central locking system of Excelle jumping are: 1. Water ingress in the wiring; 2. Damage to the central locking control unit; 3. Damage to the central locking system. To address the jumping issue in the Excelle's central locking system, it is necessary to visit a 4S dealership to replace the door lock control assembly and the central control module. The central locking system, fully known as the central control door lock, is an automotive component composed of the door lock switch, actuator, and controller. Taking the Excelle 2020 model as an example, its body dimensions are: length 4468mm, width 1765mm, height 1469mm, with a wheelbase of 2611mm. The Excelle 2020 is equipped with a 1.3L naturally aspirated engine, delivering a maximum power of 79kW and a maximum torque of 133Nm, paired with a 5-speed manual transmission.

3

4

Share

What is the purpose of front wheel toe-in?

The purpose of front wheel toe-in is to eliminate the adverse effects caused by wheel camber, ensuring that the wheels do not roll outward, preventing wheel side slip, and reducing tire wear. The toe-in value can be adjusted by changing the length of the steering tie rod, with a general toe-in value ranging from 0 to 12mm. Wheel camber causes the left and right wheels to frequently exert opposing side thrust forces corresponding to the camber angle, increasing tire wear. To eliminate the side thrust forces, during wheel installation, the center planes of the two front wheels of the car are not parallel, with the distance between the front edges of the two wheels being less than that between the rear edges. The difference between these distances is the front wheel toe-in.

12

3

Share

How to Turn Off a Porsche 718?

What is the tire model of the Qashqai?

What Causes Loud Engine Noise During Cold Start?

Can You Still Drive When the Car Radiator Temperature is High?

What is the engine model of the Hyundai Fista?

What causes the central locking system of Excelle to jump?

What is the purpose of front wheel toe-in?

What car has a license plate with a 'V'?

How to Clean a Dirty Car Radiator?

What is the displacement of the Excelle 15t?

What does the exclamation mark with a triangle illuminated on the car mean?