How to Turn Off a Motorcycle?

Does the throttle need cleaning at 20,000 kilometers?

Cleaning the throttle refers to removing carbon deposits on it. It only needs cleaning when there are carbon deposits; if there are none, cleaning is naturally unnecessary. Therefore, there is no specific mileage requirement for throttle cleaning, unlike oil changes which have a set mileage interval. Whether cleaning is needed depends on the actual situation. Below is some relevant information about the throttle: 1. The throttle is a controllable valve that regulates air entering the engine. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to produce power. It connects to the air filter at the top and the engine block at the bottom, earning it the nickname "the throat of the car engine." 2. The throttle is one of the most important components in today's electronic fuel injection engine systems. Its upper part connects to the air filter, and its lower part connects to the engine block, making it the throat of the car engine. The responsiveness of acceleration is closely related to the cleanliness of the throttle. Cleaning the throttle can reduce fuel consumption and make the engine more agile and powerful.

19

3

Share

Does Applying the Electronic Parking Brake in D Gear Cause Damage?

It is possible to apply the electronic parking brake while in D gear. The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking control through the friction generated between the brake disc and brake pads. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. The reasons for brake noise without pressing the brake pedal are as follows: 1. Use of inferior or overly hard brake pads: If inferior or overly hard brake pads are used, they will produce a squeaking noise when rubbing against the brake disc during braking. Therefore, it is essential to use high-quality brake pads when replacing them. 2. Presence of sand or foreign objects between the brake pads and brake disc: During normal driving, it is inevitable to pass through some complex road conditions. Due to the unique design of disc brakes, some sand and foreign objects may get between the brake pads and the brake disc, which can also cause noise during braking.

20

3

Share

What are the consequences of water ingress in an electric power steering system?

Water ingress in an electric power steering system can cause the steering wheel to become heavy. Over time, severe cases may result in the steering wheel locking up. If this occurs while driving, the consequences can be serious, posing a high risk of danger. It is recommended to seek timely inspection and repair at a 4S shop. There are three common types of power steering systems: 1. Mechanical hydraulic power steering: The main components of this system include a hydraulic pump, oil pipes, pressure fluid control valve, V-belt, and oil reservoir. This method converts part of the engine's power output into hydraulic pump pressure to provide auxiliary force to the steering system, thereby enabling tire steering. 2. Electro-hydraulic power steering: In this system, the steering oil pump is no longer directly driven by the engine but by an electric motor. Additionally, an electronic control system is added, making the steering assist force not only related to the steering angle but also to the vehicle speed. 3. Electric power steering: This system directly provides steering assistance through an electric motor, eliminating the need for components such as the power steering oil pump, hoses, hydraulic fluid, drive belt, and pulley mounted on the engine. It saves energy and is environmentally friendly.

10

3

Share

What does 'including license plate registration' mean?

Purchasing a car with 'including license plate registration' means that the 4S dealership assists in handling the license plate registration. More details about 4S dealership license plate registration are as follows: 1. Bundled license plate registration by 4S dealerships: The most obvious issue is that it infringes on consumers' right to freely choose services. Whether to entrust the 4S dealership to register the license plate for the purchased vehicle should be based on the consumer's voluntary decision. 4S dealerships charging consumers a license plate registration fee in a bundled manner constitutes forced consumption. 2. License plate registration fee: The fee given to the vehicle management office for license plate registration and the new car sales service fee are two separate matters. 4S dealerships simplifying the license plate registration service fee as 'license plate registration fee' contains misleading elements. Therefore, lawyers advise consumers that when negotiating the car price with a 4S dealership, they should clarify each price component, such as the base car price, decoration fees, insurance fees, and license plate registration agency fees. If the 4S dealership only provides a lump-sum price, consumers have the right to refuse the service.

4

5

Share

What are the six orientations of a car?

Car six orientations refer to the front, left side, rear, right side, driver's compartment, and engine hood. The details are as follows: Front part: Positioned at a 45-degree angle to the front of the car, the sequence generally includes the overall shape, engine hood, headlights, grille, and front bumper. The key parts here are the emblem on the grille and the introduction of the headlights. Side view: Side profile, tires and rims, braking system, chassis and door construction, and frame type. Rear seats: Rear seat space, foldability, storage space, suspension type, and other configurations such as child seat placement, child lock, and rear sunshade. Rear part: Rear end, trunk space, trunk and other configurations, taillights, rear bumper, and parking sensors or camera. Driver's compartment: Steering wheel and seat adjustments, dashboard and center console configurations, air conditioning and multimedia setups, and safety features like airbags. Engine compartment: Engine description, transmission introduction, wiring harness layout, and safety measures adopted.

6

3

Share

What is the battery model of the Peugeot 308?

The Peugeot 308 is equipped with an L2_400 type battery, with a voltage of 12.6V and a capacity of 60AH. Introduction to the Peugeot 308: 1. Interior: Apart from a few familiar elements like the steering wheel and audio controls, everything else features a completely new design. The entire dashboard is positioned more vertically than before to enhance the sense of space in the cockpit. The instrument panel in front of the steering wheel has been redesigned to be more stylish and modern, especially the creative instrument pointers. 2. Powertrain: It will offer three gasoline engines and three diesel engines. The entry-level option is a 1.4L VTi engine with 95 horsepower and 136N·m of torque. The 1.6L VTi engine delivers 120 horsepower and 160N·m of torque, with an average fuel consumption of 6.7L/100km and a top speed of 195km/h. The 1.6THP engine comes in two versions: 150 horsepower and 140 horsepower, both with 240N·m of torque and an average fuel consumption of 7.1L/100km. The 150 horsepower version can propel the 308 to a top speed of 213km/h.

7

5

Share

How to Turn Off a Motorcycle?

Does the throttle need cleaning at 20,000 kilometers?

Does Applying the Electronic Parking Brake in D Gear Cause Damage?

What are the consequences of water ingress in an electric power steering system?

What does 'including license plate registration' mean?

What are the six orientations of a car?

What is the battery model of the Peugeot 308?

Why can't CVT use a circulation machine for oil change?

Will having an uninspected vehicle under my name affect buying a new car?

What should be paid attention to when adding windshield washer fluid to a car?

What Causes BMW Particulate Filter Blockage?