How to Turn Off a Car with One-Button Start?

Can ETC only be used for one vehicle?

ETC can be used for multiple vehicles with one card. According to the "Rules for the Use of Non-Stop Express Passage Systems," when applying for an ETC card, you need to fill out the "ETC Service Deduction Authorization Form." When specifying the vehicles for payment binding, multiple vehicles can be listed. This means there is no limit to the number of vehicles that can be bound to a single ETC card for payment purposes. ETC is a non-stop electronic toll collection system, also known as an automatic road payment system. It is a specialized method for toll roads, commonly seen on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC Deduction Principle: Highways have one or more ETC lanes. Communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane enables automatic toll deduction through computer network technology and bank settlements. This allows vehicles to pass toll stations without stopping, operating on a "pass first, deduct later" principle. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Reduces noise and exhaust emissions by avoiding stops at toll booths; Cost-saving: Minimizes vehicle wear and fuel consumption by reducing frequent starts and stops; Efficiency improvement: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster and more advanced. Compared to license plate payment, ETC technology is more mature and advantageous. More Policy Support: The State Council's "13th Five-Year Plan for the Development of a Modern Integrated Transportation System" explicitly states the goal of "achieving interoperability of transport cards in key city clusters by 2020 and significantly increasing the adoption rate of ETC in vehicles." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020." Future Possibilities: Beyond improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC adoption for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for vehicle owners, expanding ETC applications to more scenarios.

11

1

Share

Can You Wear a Hat for the Subject 1 Test?

There are no explicit regulations, but avoid wearing clothing such as tank tops, vests, slippers, etc., otherwise entry to the examination hall will be prohibited. If wearing items like hats, masks, or scarves that cover the face, you may enter the examination hall after removing them. Notes for the Subject 1 test: Candidates should pay attention to their attire; slippers are not allowed, electronic devices and bags are prohibited in the examination hall, bring your ID card, and queue to enter the waiting hall. Observe the notes and procedures on the large screen, and store personal belongings in lockers before entering the examination hall. Upon entering, seats will be assigned at the identity verification point. After finding your seat, the test begins. Ensure the camera is aligned with you and adhere to exam discipline. If you fail the first attempt, a retake is available the same day. Failing again requires payment to reschedule. After completion, queue to collect your scorecard and sign it; unsigned scorecards are considered invalid. The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulate that the Subject 1 test can be taken twice on the same day. If you fail the first attempt, a free retake is available for the second attempt. If you fail the second attempt, the Subject 1 test is terminated, and you can only reschedule the test after ten days. Subject 1, also known as the theoretical driving test or driver's theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The Subject 1 test consists of 100 questions, divided into single-choice and true/false questions, each worth 1 point, totaling 100 points. If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the exam. The Subject 1 test is computer-based. The test duration is limited to 45 minutes. Subject 1 test content includes: driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic motor vehicle knowledge; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, and if you fail, a retake is available. If you do not take the retake or fail the retake, the test is terminated, and the applicant must reschedule. For Subject 2 and Subject 3, there are only five test attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safety and civilized driving knowledge test, the passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safety and civilized driving knowledge test. The safety and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include Subject 4.

10

0

Share

Where is Geely Automobile Produced?

Geely Automobile is produced in Linhai, Ningbo, Luqiao in Zhejiang Province, and Shanghai. Here is some relevant information about Geely Automobile: 1. Logo Meaning: The new logo of Geely Automobile continues the design concept of six gemstones from the Brand 3.0 era, using the expanding universe as the design source, incorporating silver starlight, deep space gray, and earth blue, showcasing Geely Automobile's evolution from the blue sky and earth of the Brand 3.0 era to the pursuit of the vast universe. 2. Sub-brands: Geely Automobile Group currently owns the Geely Automobile brand, Lynk & Co brand, Geometry brand, Proton brand, and Lotus brand.

1

3

Share

What does the ABS light on the car dashboard mean?

The ABS light on your car indicates a malfunction in the Anti-lock Braking System. If the wheels lock up during emergency braking, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses a significant safety hazard. There are several conditions under which the ABS light may illuminate, each with different causes and solutions: Condition 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the vehicle's speed signal. This prevents the ABS computer from determining the speed and wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can lead to signal issues and system failure. Solution: Check all wiring connections and reattach any loose ones. Condition 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple electrical components are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS light turns off. This can also happen if the ABS system's power supply voltage is too low due to poor contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or power contact issues). Condition 3: ABS warning light stays on after engine start until the engine is turned off. Cause: Poor grounding contact in the ABS hydraulic valve body, faulty wiring connections in the valve body, or a malfunctioning ABS computer. Solution: Loosen and retighten the grounding screws on the hydraulic valve body, clean contact surfaces if necessary, check for enlarged gaps in connectors, and replace the ABS or ABS/ASR computer if needed. Condition 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between rear and front wheel speeds during high-speed driving, possibly due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, typically found on the label near the fuel tank cap. Condition 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, manually push the brake switch lever down fully, then release the brake pedal to reset its position. Replace the brake light switch if necessary.

13

1

Share

What is the cylinder pressure of the Volkswagen CSR engine?

Engine cylinder pressure is between 1100 and 1300kpa. The reasons for insufficient engine cylinder pressure are: Insufficient cylinder lubrication causing cylinder scoring, leading to excessive cylinder wall wear; Poor or damaged cylinder head gasket sealing, resulting in insufficient airtightness between the cylinder block and cylinder head; Excessive flatness of the two contact surfaces between the cylinder head and cylinder block, causing poor cylinder sealing; Intake and exhaust valves not closing tightly; Malfunction in the vehicle's cooling system leading to insufficient engine heat dissipation. The solutions for insufficient engine cylinder pressure are: Replace piston rings or cylinder liners; Replace the cylinder head gasket and tighten the screws to the specified torque; Check if the water passages are clear, pay attention to adding coolant, and promptly replace or eliminate any leaking components.

14

5

Share

What Causes a Sudden Increase in Fuel Consumption for an Audi at 60,000 Kilometers?

Excessive engine carbon buildup is a significant reason. Severe engine carbon deposits: Carbon deposits typically form on the fuel injectors, spark plugs, throttle valve, and combustion chamber. When carbon buildup reaches a certain level, it can cause difficulty in ignition. Use of low-quality fuel: Since low-quality fuel contains more impurities, it cannot burn completely, leading to most of the gasoline being expelled from the vehicle. Additionally, a white or reddish-brown layer forms on the surface of the oxygen sensor, causing misjudgment in measuring the oxygen content in the exhaust. This results in incorrect feedback data, ultimately affecting the proper control of the fuel injection ratio. Excessive vehicle load: Carrying too many unnecessary items in the vehicle can increase its weight. Some drivers prefer to fill the fuel tank to the brim, which also adds to the vehicle's weight. The heavier the load, the greater the pressure on the tires against the ground, leading to increased tire friction.

14

0

Share

How to Turn Off a Car with One-Button Start?

Can ETC only be used for one vehicle?

Can You Wear a Hat for the Subject 1 Test?

Where is Geely Automobile Produced?

What does the ABS light on the car dashboard mean?

What is the cylinder pressure of the Volkswagen CSR engine?

What Causes a Sudden Increase in Fuel Consumption for an Audi at 60,000 Kilometers?

What Does the Yellow P Light Indicate?

What is the Difference Between Glazing and Waxing?

What does the Subject 3 driving test include?

How long after passing Subject 1 can you take the Subject 2 test?