How to Tune a Car for More Power?

What Are the Fuel-Saving Tips for Coasting in a Manual Transmission Car?

Minimize coasting in neutral, use lower gears for overtaking acceleration, and avoid prolonged half-clutch engagement. Below are the related explanations for fuel-saving coasting in manual transmission cars: 1. Minimize coasting in neutral: Most experienced drivers know that coasting in neutral with a manual transmission is extremely dangerous as it disengages engine braking, relying solely on brakes to stop the vehicle. This causes significant wear on the braking system and increases the risk of accidents if braking fails. 2. Use lower gears for overtaking acceleration: Some beginners assume shifting to higher gears enables faster overtaking, but in reality, lower gears provide greater torque and power, resulting in quicker acceleration. With proper control, instantaneous overtaking can be achieved. 3. Avoid prolonged half-clutch engagement: Some drivers habitually rest their left foot on the clutch pedal, keeping the car in a half-clutch state. During high-speed driving, this condition causes severe wear on the clutch plates, so it's best to break this bad habit.

13

0

Share

Where is the cabin air filter located on the Fengguang 580?

The cabin air filter of the Fengguang 580 is located behind the glove box on the passenger side. Below is relevant information about the cabin air filter: 1. Functions: Ensures the filter tightly fits the housing to prevent unfiltered air from entering the cabin; separates solid impurities such as dust, pollen, and abrasive particles from the air; adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc.; provides strong and long-lasting moisture adsorption; prevents car windows from fogging up, ensuring clear visibility and driving safety for passengers; supplies fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; effectively sterilizes and deodorizes; maintains clean cabin air to prevent bacterial growth, creating a healthy environment; effectively separates solid impurities like dust, core powder, and abrasive particles from the air; efficiently intercepts pollen to prevent allergic reactions that could affect driving safety. 2. Maintenance: If the filter is dirty, clean it by blowing compressed air from the opposite side. Hold the air gun about 5cm (centimeters) away from the filter and blow at a pressure of 500kPa for approximately 2 minutes. The cabin air filter tends to accumulate a lot of dust; simply blow away loose dust with compressed air and avoid washing with water.

12

2

Share

What is the difference between FAW Mazda and Changan Mazda?

FAW Mazda and Changan Mazda belong to different companies. The following is an introduction: 1. FAW Mazda Motor Sales Co., Ltd. is a joint venture established by China FAW Group Corporation, FAW Car Co., Ltd., and Mazda Motor Corporation of Japan. 2. Mazda is the only overseas integrated vehicle manufacturing enterprise that combines production, procurement, R&D, and sales. Additional Information: 1. Mazda Motor Corporation was established in 1920, originally named Toyo Cork Kogyo Co., Ltd. Starting from 1929, Mazda quickly transitioned from producing tools to manufacturing commercial three-wheeled trucks. As early as the 1960s, Mazda launched its first passenger car model. Shortly thereafter, Mazda began investing in and developing rotary engines. 2. Over the past thirty years, Mazda has exported vehicles to the United States, Europe, and many other major markets. Currently, overseas sales account for more than two-thirds of Mazda's global sales, with over 1.1 million vehicles sold in 2004. Mazda has two main production bases in Japan and 15 overseas production plants. 3. Mazda takes pride in its glorious history of technological innovation, particularly represented by the rotary engine. Although many top-tier companies have attempted to commercialize the rotary engine, only Mazda has persevered in this field, overcoming challenges and successfully producing sports car rotary engines.

7

0

Share

Where is the negative terminal of the Honda Vezel battery located?

The battery of the Honda Vezel is located in the engine compartment. You can open the hood using the switch inside the car, and upon lifting the hood, you will see the vehicle's battery. There are two terminals on the battery. The one marked with a + sign is the positive terminal, and the other one is the negative terminal. The Vezel is the first SUV under GAC Honda, developed based on Honda's new vehicle platform. Here is some information about the Honda Vezel's battery: 1. The battery of the Honda Vezel is located in the engine compartment. You can open the hood using the switch inside the car, and upon lifting the hood, you will see the vehicle's battery. 2. There are two terminals on the battery. The one marked with a + sign is the positive terminal, and the other one is the negative terminal. If the vehicle needs to be parked for an extended period, you can disconnect the negative terminal to prevent battery drain. After disconnecting the negative terminal, make sure it is secured and does not come into contact with the battery. 3. The Vezel is typically equipped with an original Japanese Yuasa battery, model 55B24L(S)-MF, which is a maintenance-free battery. It has a capacity of 45AH and a cold cranking amperage (CCA) of 410A. This is a special battery designed for start-stop systems. After replacing or disconnecting the battery, the vehicle requires a learning and matching process.

10

0

Share

How to Shift Gears in the Lynk & Co 03?

The Lynk & Co 03 uses an electronic gear shift, which can be operated by gently pushing the gear lever. Below is an introduction to the Lynk & Co 03: 1. Model Introduction: The Lynk & Co 03 was officially launched on October 19, 2018, at the Fuji Speedway in Japan. Positioned as a trendsetting sports sedan, it comes in six models with three design styles: Pure, Hybrid, and Dynamic. 2. Exterior: The Lynk & Co 03's 'Wind-Cutting Design' combines the brand's family-style 'Urban Contrast Aesthetics' design philosophy with aerodynamic elements. It largely retains the Lynk & Co family design, featuring split-type headlights, a horizontal front grille, and lower trim strips. The side profile maintains the classic three-box sedan shape with smooth C-pillar lines, while the rear features 'L'-shaped taillights and a black decorative panel integrating reflectors.

3

1

Share

What is the issue with high temperature at idle speed?

Rust in the radiator causing poor water flow, unable to dissipate heat normally. Below is a related introduction about high temperature at idle speed: 1. Reasons for engine high temperature at idle speed: There is a water pump in the car's cooling system that forces the coolant to circulate. Additionally, there is a thermostat responsible for determining whether the coolant undergoes a small or large circulation. 2. Hazards of engine high temperature at idle speed: Due to prolonged idling, the engine temperature remains too low, leading to incomplete fuel combustion, which can easily cause carbon buildup, clog the fuel injectors, and severe carbon deposits may cause the piston rings to seize or even break. Prolonged idling also results in poor fuel atomization, where unburned atomized diesel condenses and washes down the cylinder walls, entering the lubricating oil, diluting and degrading it. This leads to insufficient lubrication for the engine's moving parts, accelerating engine wear.

12

1

Share

How to Tune a Car for More Power?

What Are the Fuel-Saving Tips for Coasting in a Manual Transmission Car?

Where is the cabin air filter located on the Fengguang 580?

What is the difference between FAW Mazda and Changan Mazda?

Where is the negative terminal of the Honda Vezel battery located?

How to Shift Gears in the Lynk & Co 03?

What is the issue with high temperature at idle speed?

What Causes a Tight Handbrake to Fail to Stop the Vehicle?

How Long Does It Take to Check Points Deducted for Running a Red Light?

How to Distinguish Between 2WD and 4WD in Audi Q3?

Why does it prompt that ETC has already been processed when applying?