How to Trigger the Front Parking Sensors?

What are the body dimensions of the Lavida?

The length, width, and height dimensions of the Lavida are 4670mm/1806mm/1474mm, which are official data. The length of the Lavida refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The Lavida's turbocharged engine has a maximum power of 110kW and a maximum torque of 250 Nm. The engine's maximum power speed is 5000 rpm, and its maximum torque speed ranges from 1750 to 3000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a dry dual-clutch transmission (DCT). National regulations stipulate certain requirements for vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

18

4

Share

Where is the air filter element of the Volkswagen Magotan located?

The air filter element of the Volkswagen Magotan is located in the engine compartment, either above the engine or inside the air filter near the battery. According to the maintenance manual, the air filter element should generally be replaced every 10,000 to 20,000 kilometers or during every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of sludge in the throttle. Function of the air filter element: It filters out particulate impurities in the air, ensuring that a sufficient amount of clean air enters the cylinders and preventing floating dust from being sucked into the engine, which can accelerate wear on the piston assembly and cylinders. Air filter element: It is a type of filter, also known as an air filter cartridge, air cleaner, or air filter. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust in the air will be drawn into the cylinders, accelerating wear on the piston assembly and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly problematic in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders. Dirty air filter: Using a dirty air filter while driving can lead to insufficient air intake into the engine, resulting in incomplete fuel combustion, unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The automobile air filter is a device that removes particulate impurities from the air, consisting of one or several components that clean the air. Its primary function is to filter out harmful impurities from the air before it enters the cylinders, thereby reducing early wear on the cylinders, pistons, piston rings, valves, and valve seats. Thus, before air enters the cylinders, it must pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light blockage, it can be cleaned using high-pressure air blown from the inside out and reused. A severely dirty air filter should be replaced promptly.

5

2

Share

What is the principle of tubeless tires?

Principle: Utilizing the principle of inflation and expansion, the internal gas of the tire is sealed by the outer tire sealing pad and the outer edge structure of the wheel hub, with the outer tire also serving as the inner tube. Tubeless tires are sealed as one with the wheel rim, requiring high manufacturing precision. Most are made of die-cast aluminum integrated wheel hubs, offering high positioning accuracy between tires and minimal radial runout of the wheel. Below are precautions for using tubeless tires: 1. Maintain the specified air pressure: Inner tube tires are made of high-quality rubber, offering good elasticity, strong flexibility, and a wide range of adaptability to air pressure. Even at high pressure, they do not feel as hard as conventional tires. Therefore, a pressure gauge must be used to check the air pressure. Unless punctured, tubeless tires generally do not deflate on their own. Hence, when inflating, use a pressure gauge to check and maintain the specified pressure, and never rely on touch to decide whether to add air, as with conventional tires. 2. Not suitable for overloading: Tubeless tires are wear-resistant but not pressure-resistant. Some heavy-duty trucks replace the steering wheels with tubeless tires while keeping the main load-bearing drive wheels as conventional steel-belted tires, ensuring both load capacity and driving comfort. 3. Avoid punctures: Tubeless tires should also avoid being punctured or damaged by sharp objects, and avoid contact with acids, alkalis, or oil stains, which can accelerate rubber degradation. Keep the tires clean to prevent rubber aging and extend their service life. 4. Not suitable for dirt roads: Tubeless tires perform well on asphalt and concrete roads, maintaining strong traction and stability even on wet surfaces. However, they have poor traction and stability on dirt roads, especially muddy ones. Motorcycles with tubeless tires are best used in urban areas and not on rural dirt roads.

19

0

Share

How to Restore the Full Screen of the Rearview Camera?

Rearview camera full-screen settings are related to the integrated navigation system. Simply turning off the engine and restarting the power can restore normal function. Here is some additional information: 1. The rearview camera is also known as a parking assist system, reverse visual system, or vehicle monitoring system. 2. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. 3. Whether in terms of structure and appearance or performance and price, current products each have their own characteristics. The most commonly used types are digital display, screen display, and multifunctional rearview mirror display.

20

5

Share

What is the maintenance mileage interval?

Generally, the maintenance mileage for domestic cars is 7,000 kilometers for minor maintenance, which mainly includes changing the engine oil, inspecting the steering system, lights, brake fluid, and cleaning the three filters. Around 14,000 kilometers, a major maintenance is required. Below are additional details: The main maintenance tasks include changing the engine oil, inspecting the steering system, replacing brake pads, and changing the three filters. Of course, different cars have different maintenance mileage requirements; some require maintenance at intervals shorter than 7,000 kilometers, while others may exceed 7,000 kilometers. Detailed information can be found in the car's manual.

17

4

Share

Where is the car intake manifold located?

Car intake manifold is located in the engine compartment, which can be seen after opening the engine hood, and it is connected to the intake tract. The intake manifold delivers air to different cylinders separately, and it is generally made of plastic. Using a plastic intake manifold can reduce the weight of the engine. Some high-performance cars even use carbon fiber intake manifolds. The intake manifold must distribute the air-fuel mixture or clean air as evenly as possible to each cylinder. For this purpose, the length of the gas flow channels inside the intake manifold should be as equal as possible. To reduce gas flow resistance and improve intake capacity, the inner wall of the intake manifold should be smooth.

2

1

Share

How to Trigger the Front Parking Sensors?

What are the body dimensions of the Lavida?

Where is the air filter element of the Volkswagen Magotan located?

What is the principle of tubeless tires?

How to Restore the Full Screen of the Rearview Camera?

What is the maintenance mileage interval?

Where is the car intake manifold located?

Does not handling traffic violations for a scrapped vehicle affect the owner?

What is the maximum speed a van can reach?

What to Do When the Car Paint Surface Becomes Dull After Sanding?

What Are the Things to Add to a New Car?