How to Transfer Subject 4 Exam to Local Area?

Why is the right rear fog light not working?

The reason why the right rear fog light is not working is that some vehicles are equipped with only one fog light, and the right side is actually a reverse light. If it is confirmed to be a dual rear fog light setup, the issue may be a burnt-out bulb or a circuit break on the other side. Below is relevant information about fog lights: Introduction: In addition to the front high beams, low beams, headlights, and parking lights, and the rear running lights and brake lights, most vehicles also have a set of inconspicuous fog lights at the rear. Rear fog lights are red signal lights installed at the tail of the vehicle, designed to be easily noticed by traffic participants behind in low-visibility conditions such as fog, rain, or dust. They emit a stronger light intensity than tail lights. Classification: Fog lights are divided into front fog lights and rear fog lights. Front fog lights are typically bright yellow, while rear fog lights are red. The symbols for front and rear fog lights differ slightly—the front fog light symbol has downward light beams, while the rear fog light symbol has parallel beams. These symbols are usually located on the vehicle's dashboard. Due to their high brightness and strong penetration, fog lights do not produce diffuse reflection in foggy conditions, making them effective in preventing accidents when used correctly. In foggy weather, front and rear fog lights are usually used together.

7

1

Share

What is the standard for adjusting car headlight height?

Car headlight height adjustment standards are as follows: When adjusting the lights, do not use a wall. Drive the car onto a flat road, adjust the low beam points to coincide at a distance of 30 meters, and adjust the high beam points to be parallel to the ground. Walls are used to adjust the parallelism of the two high beam points. Below are the characteristics of car headlights: 1. High color temperature, with a bluish light color. K is the indicator of color temperature; ordinary halogen lights typically have a color temperature below 3000K. Xenon lights generally start at 4500K, and 7000K is quite common. Higher K numbers are generally closer to daylight and more easily accepted. 2. High brightness. Note that color temperature and brightness are fundamentally different concepts. Xenon lights are bright not because of their high color temperature but because of their high brightness. The unit of brightness is lumens, and the lumen output of xenon lights is generally three times that of ordinary halogen lights. 3. Low energy consumption and long lifespan. Other features include low energy consumption and long lifespan.

5

0

Share

What Causes Continuous Vibration After Starting the Car?

Here are the reasons why a car may vibrate after starting: 1. Low ignition energy. 2. Poor fuel atomization at low temperatures. 3. Fuel requires higher ignition energy. 4. Prolonged vehicle use leading to increased spark plug gap. 5. Severe engine carbon buildup. 6. Poor performance of the ignition system, with inadequate spark plug firing. 7. Unstable oil pressure. Here are the steps to resolve car vibration after starting: 1. If dismantling the intake tract for cleaning is not feasible, use a no-disassembly fuel system cleaning device, although the effect may not be as ideal as dismantling. 2. It is recommended to replace the spark plugs. Depending on the condition, you may clean the spark plugs or adjust the spark plug gap for continued use. Replace them if the issue persists.

14

2

Share

What Causes the Electronic Stability System Warning Light to Illuminate?

When the indicator light remains constantly illuminated, it indicates a malfunction in the electronic vehicle stability system. The vehicle should be taken to a nearby repair facility for inspection as soon as possible. Below is an introduction to the Electronic Stability Program (ESP): 1. Overview: The Electronic Stability Program is a general term for systems or procedures designed to enhance vehicle handling performance while effectively preventing loss of control when the vehicle approaches its dynamic limits. ESP improves vehicle safety and handling. 2. Principle: By analyzing vehicle driving state information received from various sensors, the system then issues correction commands to ABS, EBD, etc., to help maintain dynamic balance of the vehicle.

11

3

Share

What does 'Please Service ESC' mean and how to fix it?

When the dashboard displays 'Please Service ESC', it indicates a malfunction in the vehicle's Electronic Stability Control system. To resolve this issue, a diagnostic tool is required to read the fault codes from the Electronic Stability Control system. Below is an introduction to ESC: Function: ESC significantly enhances vehicle handling safety and driving convenience. In emergency situations such as sharp turns, sudden acceleration, or hard braking, the system quickly detects the condition and takes appropriate braking actions, such as individually controlling each wheel while reducing engine output to maintain vehicle stability. Components: ESC primarily consists of three major parts: sensors, actuators, and the Electronic Control Unit (ECU). A malfunction in any of these components can trigger the ESC warning light.

9

5

Share

What is the Difference Between Suspension and Shock Absorbers?

Suspension and shock absorbers are not the same type. The following introduces the differences between suspension and shock absorbers: 1. Shock absorbers are components of the suspension system. 2. The automotive suspension system consists of springs and shock absorbers between the car body and the tires. 3. The suspension system is used to support the entire car body and improve the ride comfort of the vehicle. Additional information: 1. Shock absorbers, also known as dampers, are the buffering devices of a car. 2. The need for shock absorbers arises because springs cannot stabilize immediately and will continue to extend and compress for a while. 3. Shock absorbers can absorb the vibrations caused by tires encountering rough roads, making the ride more comfortable.

19

3

Share

How to Transfer Subject 4 Exam to Local Area?

Why is the right rear fog light not working?

What is the standard for adjusting car headlight height?

What Causes Continuous Vibration After Starting the Car?

What Causes the Electronic Stability System Warning Light to Illuminate?

What does 'Please Service ESC' mean and how to fix it?

What is the Difference Between Suspension and Shock Absorbers?

Are Rearview Mirror Rain Guards Actually Useful?

Is it normal for a Corolla to run 400 kilometers on a full tank of gas?

What does Variable Cylinder Engine mean?

What does a car keyless entry system mean?