How to Transfer ETC to a New Car After Vehicle Transfer?

Where is the air filter of Mercedes-Benz V260 located?

The air filter of the Mercedes-Benz V260 is located inside the glove compartment in front of the passenger seat. Introduction to the Mercedes-Benz V260: 1. The body dimensions of the Mercedes-Benz V260 are 5370mm in length, 1928mm in width, and 2100mm in height. 2. The Mercedes-Benz V260 is equipped with the M274L 4-cylinder turbocharged direct injection engine. The method for replacing the air filter of the Mercedes-Benz V260 is as follows: 1. Open the glove compartment and remove the fuse box inside. 2. Unscrew all the screws on the glove compartment and then remove the cover plate. 3. Remove the plastic clips on both sides of the air filter and replace it with a new one. 4. Reassemble the cover plate and fuse box in the reverse order of removal.

6

5

Share

Is the BYD Qin Plus DM-i a B-segment car?

BYD Qin Plus is not a B-segment car. The BYD Qin Plus is a compact car. Body parameters of the BYD Qin Plus: The BYD Qin Plus has a wheelbase of 2718 millimeters (mm), with length, width, and height dimensions of 4765 mm, 1837 mm, and 1495 mm respectively. It is a four-door, five-seater sedan and is a plug-in hybrid electric vehicle. Engine of the BYD Qin Plus: The BYD Qin Plus is equipped with a 1.5-liter naturally aspirated four-cylinder engine. This engine has a maximum power output of 81 kW, with the maximum power achieved at 6000 revolutions per minute (rpm). The maximum torque is 135 Newton-meters (Nm), reached at 4500 rpm.

13

3

Share

How to Replace the Coolant in Dongfeng Fengxing S500?

Dongfeng Fengxing S500 coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way hose. The five-way hose gets its name from having five interfaces that connect various parts. The coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of coolant in this part, the hose should be replaced or the interface should be re-secured based on the situation. Drain the old coolant and then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue to inject water into the reservoir, allowing the water to flow continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will have a faint pink color. Continue adding clean water until the water coming out is clear. Note: Don’t forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. This is a method to allow the coolant to flow quickly into the radiator. Then, add another bucket of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, due to the expulsion of some air from the cooling system, the liquid level will drop slightly. Add more coolant until it reaches the maximum mark "MAXT" on the reservoir.

14

3

Share

Does the BYD Qin Use Green or Blue License Plates?

BYD Qin uses green license plates. The BYD Qin Plus model is classified as a new energy vehicle, with energy types being plug-in hybrid and pure electric. Both types fall under the new energy category, so it is perfectly appropriate to display the green new energy-specific license plate. New energy vehicle-specific license plates: Green background with black characters and black borders. The new energy vehicle license plate features a gradient green design, while large new energy vehicle license plates use a yellow-green dual-color scheme (the regional code section is yellow, and the number section is green). New energy vehicles include four major types: Hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices).

15

5

Share

How many liters of fuel does the Accent fuel tank hold?

The 2011 Accent 1.4 manual White-collar model has a fuel tank capacity of 45L. It is equipped with a 1.4L naturally aspirated engine, a 5-speed manual transmission (MT), and features front-wheel drive. The front suspension is of the MacPherson independent type, while the rear suspension is a torsion beam non-independent type. In the same vehicle class, the 2020 K2 1.4L automatic Comfort Sunroof version has a fuel tank capacity of 43L, and the 2021 All New Q1 1.3L automatic Comfort model has a fuel tank capacity of 45L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' and 'F'. When the needle is close to 'E', it indicates low fuel, while nearing 'F' means the tank is nearly full.

3

1

Share

What is the fuel consumption of the BYD Qin Pro?

The comprehensive fuel consumption of the BYD Qin Pro is 6.4-6.5L/100km. Currently, there are 3 models of the BYD Qin Pro on sale: the manual luxury model and the automatic premium model, both with a comprehensive fuel consumption of 6.4L/100km. The automatic flagship model has a comprehensive fuel consumption of 6.5L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.2-7.8L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a high level of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio in the engine. Once damaged, it can cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the oxygen sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they can become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults can inevitably occur.

13

1

Share

How to Transfer ETC to a New Car After Vehicle Transfer?

Where is the air filter of Mercedes-Benz V260 located?

Is the BYD Qin Plus DM-i a B-segment car?

How to Replace the Coolant in Dongfeng Fengxing S500?

Does the BYD Qin Use Green or Blue License Plates?

How many liters of fuel does the Accent fuel tank hold?

What is the fuel consumption of the BYD Qin Pro?

What platform does the Honda Accord use?

How many liters of engine oil does the Mondeo 2.0T require?

Is the CHR engine imported?

What are the first maintenance items for the new Honda Vezel?