···
Log in / Register

How to Transfer Driving Schools After Passing Subject 1?

6Answers
RhettFitz
09/02/2025, 04:16:33 AM

Negotiate with the registered driving school to obtain their consent for transferring your file. Below is relevant information: 1. Application Location: Apply directly at the vehicle management office in your current residence to change the exam location, without needing to return to the original exam location. The exam location can be changed once. 2. Application Procedure: Mainland residents can use their resident ID card, while residents from Hong Kong, Macao, and Taiwan can use their residence permits to directly apply for the exam location change. Other individuals and situations require identification documents as specified in the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses." 3. Exam Process: After changing the exam location, applicants can directly schedule the remaining subject exams in their current residence. Previously passed subjects remain valid. After passing all subjects, the driver's license can be collected directly at the current exam location.

Was this review help?
120
Share
LeLeonardo
09/14/2025, 11:22:02 PM

Just helped my cousin with the transfer procedures a couple of days ago, the process wasn't too complicated. After passing Subject 1, you need to first obtain a withdrawal certificate from the original driving school, remember to retrieve your ID card and the original medical examination form. Then take these materials to the vehicle management office to cancel the original enrollment – note that simply getting a refund doesn't complete the process. When choosing a new driving school, pay close attention to the locations of their training grounds; some schools have Subject 2 and Subject 3 sites over ten kilometers apart, which can be quite troublesome. Finally, pay 500 yuan to establish a new file at the new driving school, and the vehicle management office will issue a new exam admission ticket. The entire process takes at least three days at the fastest, so it's recommended to choose a driving school with its own exam site for convenience.

Was this review help?
4
Share
Expand All
VonDawson
10/29/2025, 12:01:33 AM

Last year, I learned a hard lesson when transferring driving schools. The key is to properly handle the three-party relationship. First, when negotiating a refund with the original driving school, deducting 30% according to the contract is standard practice, but it's negotiable. You must obtain a transfer approval letter with a red seal, otherwise the new driving school won't accept you. For the vehicle management office, bring your ID card and original test admission ticket to process file transfer. Many cities now allow online applications through the Driving Test 12123 APP. A reminder: when choosing a new driving school, pay special attention to the condition of their training vehicles. The steering wheel weight difference between old Jettas and Santanas is particularly significant—don't let it affect your feel for the third road test.

Was this review help?
14
Share
Expand All
StKiara
12/11/2025, 11:13:04 PM

Passing Subject 1 and Transferring Schools in Five Steps: Withdraw from the original driving school to obtain your file materials, cancel the original student status, choose a new driving school and undergo a new physical examination, pay the fees to establish a new file, and finally wait for the vehicle management office to issue a new exam permit. Pay attention to the time limit, as the materials from the original driving school are only valid for three months. It is recommended to prioritize driving schools with simulators, allowing practice even on rainy days without delaying progress.

Was this review help?
3
Share
Expand All
SanBradley
02/01/2026, 12:22:22 AM

The key to transferring driving schools lies in the DMV procedures. Bring your ID card and the transfer certificate from your original driving school to the DMV service window, fill out the "Motor Vehicle Driver's License Business Flow Cancellation Application Form," and the staff will retrieve your original driving learning certificate. It is recommended to go on Monday afternoon when there are the fewest people, and you can obtain the cancellation certificate on the same day. Then directly enroll in the new driving school, paying special attention to the fact that the hours for Subject 2 may be reset and recounted.

Was this review help?
10
Share
Expand All
VanCharlie
04/26/2026, 05:37:06 PM

As someone who has been through it, here are a few details to keep in mind: Your original subject one test scores remain valid for three years after transferring, so you don't need to retake it. It's best to choose a branch within the same group as your original driving school, so your training records can be seamlessly transferred. Pay special attention to the retake fee clauses in the new contract—some driving schools charge 200 yuan per retake for subject two, which is unreasonable. If your original driving school gives you trouble, calling the 12328 transportation service hotline to file a complaint is the most efficient solution. Last time, my issue was resolved in just three days.

Was this review help?
4
Share
Expand All
More Q&A

Why do LED headlights with built-in lenses have shadows?

Because the focal point is different from the original halogen bulb, it causes changes in the light, resulting in shadows. Below is an introduction to car headlights: 1. Introduction to car headlights: Car headlights, also known as car front lights or LED daytime running lights, serve as the eyes of a car. They not only relate to the external image of a car owner but are also closely linked to safe driving at night or in bad weather conditions. 2. The role of light adjustment: It allows the car's lights to maintain an appropriate height at all times, facilitating nighttime driving and adapting to different road conditions. 3. The importance of light adjustment: The more passengers in the back seats, the lower the rear of the car will sink, causing the front of the car to rise accordingly. This raises the height of the headlights, which can dazzle oncoming drivers and distract them, potentially leading to traffic accidents.
101
Share

What does automatic transmission mean?

Automatic transmission, commonly known as the automatic gearbox, refers to a system where the driver does not need to manually shift gears. Below is an introduction to automatic transmission: 1. Principle of operation: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume 10% more fuel than manual transmissions. Whether manual or automatic, more gears mean better fuel efficiency. 2. Driving techniques: For manual transmission vehicles, it is advisable to shift gears at higher RPMs. Engines are designed to operate at higher RPMs, with parameters like dynamic balance and rotational inertia optimized for such conditions. If the engine operates for extended periods at non-optimal RPMs, internal components experience increased load and wear, leading to vibrations and knocking, which can shorten the engine's lifespan. Shifting at around 3000 RPM ensures that the engine operates within a healthy RPM range post-shift, typically around 2300 RPM.
111
Share

Why is the warning light still on after tire repair?

There is a tire pressure reset button on the vehicle. Press and hold this button to turn off the tire pressure monitoring warning light. If you cannot find this button or there isn't one, the tire pressure monitoring warning light will automatically turn off after driving a certain distance. Related information is as follows: 1. The tire pressure monitoring light comes on due to excessive tire pressure: Tire pressure within the range of 2.2~2.5 BAR is considered safe. However, during summer when temperatures are high, the tire pressure may actually rise after the vehicle starts moving, even if it was within the normal range initially. Therefore, in summer, it is advisable to maintain tire pressure at the lower end of the normal range, around 2.2 BAR, while in autumn and winter, it can be controlled towards the higher end at 2.5. 2. The tire pressure monitoring light comes on due to prolonged driving with low tire pressure: This situation usually occurs when the pressure in one tire is too low, causing the tire temperature to rise during high-speed operation, which in turn increases the tire pressure. In such cases, it is important to stop and rest promptly or replace the tire with a spare one.
116
Share

What Causes an Automatic Transmission Not to Shift Gears?

An automatic transmission not shifting gears is due to a transmission malfunction. Below are relevant details about gear shifting: 1. Concept: Gear shifting is the abbreviation for "gear lever operation method." It refers to the driver's psychological and physiological movements that continuously adjust the gear lever position according to road conditions and vehicle speed changes. Generally, the "gear lever operation method" is limited to the "gear lever" itself. 2. Technical Requirements: The technical requirements for gear shifting can be summarized in eight words: timely, correct, smooth, and swift. Timely means mastering the appropriate shifting moment—neither shifting up too early nor shifting down too late. Correct means the coordination between the clutch pedal, accelerator pedal, and gear lever must be accurate and harmonious, with precise positioning. Smooth means after engaging a new gear, the clutch pedal should be released promptly and steadily. Swift means the action should be quick to minimize shifting time, reduce vehicle kinetic energy loss, and lower fuel consumption.
113
Share

Will the self-sealing glue solidify inside the car tire?

Self-sealing glue will not solidify inside the car tire. Below is relevant information about tires: 1. Introduction: Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground. In 1845, R·w·Thomson, a civil engineer born in Scotland, invented the pneumatic tire and obtained a patent from the British government under the title "Improvement in the Wheels of Carriages and Other Vehicles." On December 10 of the same year, the first pneumatic tire was born. 2. Usage: Tires are usually mounted on metal rims to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. 3. Function: Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing capacity, traction performance, and cushioning performance. At the same time, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, indicating the significant ability of tires to consume rubber.
117
Share

What is the difference between purple barrel oil and green barrel oil?

Difference lies in the viscosity and quality of the engine oil. Here is the relevant introduction about engine oil: 1. Definition: Engine oil, also known as engine lubricant, English name: Engine-oil. Density is approximately 0.91kg×10 cubic, known as the 'blood' of automobiles. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining the basic properties of the lubricating oil, while additives can compensate for and improve the deficiencies of the base oil, giving it some new properties, making it an important component of lubricating oil. 2. Function: It can lubricate and reduce wear for the generator, assist in cooling, seal and prevent leakage, prevent rust and corrosion, and provide shock absorption and buffering.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.