···
Log in / Register

How to Transfer a Driver's License Registration?

4 Answers
PenelopeLee
08/29/25 5:52am
When transferring out of the jurisdiction of the vehicle management office, the office shall annotate the changes on the motor vehicle registration certificate within three days from the date of acceptance. Retrieve the license plate and vehicle license, issue a temporary vehicle license plate valid for thirty days, and hand over the motor vehicle file to the owner. To apply for motor vehicle transfer, the owner must fill out an application form, submit proof of identity, the motor vehicle registration certificate, the motor vehicle file, and present the motor vehicle for inspection. If the inspection validity period has expired at the time of transfer, a safety technical inspection must be conducted at the transfer location, and proof of passing the safety technical inspection and compulsory accident liability insurance certificate must be submitted.
Was this review help?
12
1
Share
SanLyla
09/11/25 3:33am
I just went through the process of transferring my driver's license, and it wasn't as troublesome as you might think. The first step was to prepare the documents at the original vehicle management office. Remember to bring your ID card, driver's license booklet, and fill out an application form. They'll check if your records are complete. I spent half a day there handling it. After getting the transfer-out certificate, I hurried to the new city. At the local vehicle management office, you need to submit those documents plus take a quick medical check, like a vision test, which only took 15 minutes. Oh, and don't forget to bring some money for fees—I paid about 50 yuan and also took a new photo. The whole process, from start to receiving the new license, took about a week. I think the key is to check the vehicle management office hours in advance and avoid peak times to skip long queues.
Was this review help?
8
2
Share
Expand All
SanAnna
10/25/25 4:22am
Here's an efficient method I've summarized for transferring a driver's license: Prepare all required documents, including the original ID card and a copy of the driver's license. First, go to the original vehicle management office to apply for the transfer—don't delay. Then, submit the documents directly at the window of the new local vehicle management office. They will require you to undergo a simple medical check-up, such as an eye test. The whole experience taught me that it's best to start early to avoid crowds, as you might not complete everything in one day due to the two-day processing time for document transfers. I recommend going on a weekday when the vehicle management office is more efficient. If you drive yourself back and forth, it saves both time and hassle. Remember, missing even one document might mean starting the process all over again.
Was this review help?
16
2
Share
Expand All
ReaganLynn
12/08/25 4:45am
If you're in a hurry to transfer your driver's license, my advice is to take immediate action: First, visit the original vehicle management office to complete the transfer-out procedures. Bring your ID, driver's license, and other basic documents to fill out forms—it's quick. Then, head to the new vehicle management office to submit your application, undergo a medical check-up, take a photo, and pay the required fees. If everything goes smoothly, you can complete the core parts in just one day. However, don't forget to allocate some buffer time. Avoid rushing on weekends—I've seen many cases where people got delayed due to long queues. Overall, preparing early can save you a lot of hassle.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

What causes the scraping sound when a car turns?

The scraping sound when a car turns is caused by wear and tear of the outer CV joint of the drive shaft. Reasons for friction sound when steering: The friction sound when steering occurs because the steering wheel is connected to a fixed bracket, and the rotation between the steering wheel and the fixed bracket behind it must be completed by bearings. The sound is produced by the friction between the two disk-like bearing surfaces due to insufficient lubrication. Adding some lubricating oil can solve the issue. Precautions when turning: When turning, avoid turning the steering wheel to its extreme limit, as this can help protect the steering wheel to some extent. Additionally, regularly checking the tie rods can effectively reduce minor issues like steering wheel vibration. Proper use of the car: Correct and proper use of the car's various functions not only extends the vehicle's lifespan but also ensures personal safety. The genuine leather steering wheel has an excellent texture, being smooth and soft to the touch, providing great comfort. Its effective components can block UV radiation, resist static electricity and water, and effectively prevent leather aging, cracking, and discoloration. It also contains antibacterial and anti-mold active ingredients and a water repellent, which can prevent the leather from becoming damp or moldy.
15
2
Share

How to Adjust the Gap Between Headlights and Bumper?

To adjust the gap between the bumper and headlights, you must first remove the bumper by unscrewing the mounting screws. Find the precise installation position of the bumper, then continuously adjust and observe the alignment between the headlights and the bumper until the gap is eliminated. Finally, tighten the bumper screws.
14
1
Share

How to Find the Parking Spot?

Use the relative position between the lower edge of the left rearview mirror and the stop line as a reference, generally when the lower edge of the left rearview mirror covers the stop line. Choose the relative position between the lower right corner of the front windshield and the stop sign pole as a reference. Find a reference object near the full-score parking spot in the test area, usually selecting a position parallel to the driver's shoulder when parking.
4
5
Share

What is the ordering process for the Kawasaki Ninja 400?

Purchase order, pay the balance + purchase tax + license plate agency fee + order deposit. When the customs documents arrive, after obtaining the driver's license, a residence permit must be processed through an agency; otherwise, the license plate cannot be registered. Go for vehicle inspection, purchase insurance, pick up the car, select the license plate at the traffic management office, and then return to the dealership to collect the vehicle.
11
4
Share

What is the remedy for stalling on an uphill slope in Subject 2?

Subject 2 stalling on an uphill slope can be remedied by immediately stepping on the brake to prevent rolling back, then shifting to neutral, pulling the handbrake, and releasing the clutch. When the vehicle body starts to vibrate intensely, keep the left foot steady on the clutch pedal without moving, and slowly release the brake with the right foot. Below is a related introduction to Subject 2: Introduction to the Subject 2 test: It is part of the motor vehicle driver's license assessment, referred to as the field driving skills test. Subject 2 test content: The test items for small car C1 include five compulsory items: reverse parking, parallel parking, uphill slope parking and starting, right-angle turns, and curve driving (commonly known as S-curve) (some regions also have a sixth item: high-speed card collection). The test items for C2 include four compulsory items: reverse parking, parallel parking, right-angle turns, and curve driving (commonly known as S-curve). The test items for large vehicles A1, A2, A3, B1, B2 include: stake test, uphill slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain road curves, tunnels, rainy conditions, slippery roads, and emergency handling.
20
5
Share

How to Wire the Hazard Lights on a Motorcycle?

Open the turn signal switch on the motorcycle, and you will find three wires inside. Identify the two wires leading to the left and right turn signals. Strip a small section of insulation from these wires and connect one end to a single-pole switch, then connect the other end to the wire of the left turn signal. Now, when you activate the right (or left) turn signal switch, the hazard lights will flash. Connect two of the three wires on the turn signal using a switch.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.