How to Transfer a 'Beihu' Vehicle to Your Own Name?

1 Answers
OHolden
07/29/25 3:04pm
A 'Beihu' vehicle cannot be transferred to your own name. It refers to a used car purchased using someone else's ID card, meaning the registered owner and the actual user are not the same person. A 'Beihu' vehicle is completely normal in all other aspects—it may have all the necessary documents, valid annual inspections, and insurance—but it simply cannot be transferred. It is advisable not to purchase such vehicles. According to China's vehicle management regulations, used cars under local management cannot be sold or auctioned in other regions. They require an inter-regional transfer registration, where the vehicle must go through exit procedures at the local traffic management department and entry procedures at the destination traffic management department. This has led to the practice of 'Beihu' buyers paying a local resident to use their ID card for purchasing the vehicle, hence the term 'Beihu' vehicle.
Was this review help?
20
3
Share
More Forum Discussions

What is the function of the Roewe i5 fog light switch?

The Lingpai can be equipped with a tire pressure monitoring system to check tire pressure. Below is information on Lingpai tire maintenance: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should neither be too high nor too low; always inflate according to the vehicle's indicated tire pressure. In summer, try to keep the tire pressure slightly lower. In winter, ensure the tire pressure is slightly higher than in summer due to the thermal expansion and contraction of tires. This ensures comfortable and safe driving. 2. Frequently inspect tire wear: Some vehicles may experience uneven tire wear, so it's important to regularly check tires, especially the inner side, for any abnormal wear. Pay attention to whether the tread depth is consistent on both sides. 3. Rotate tires on schedule: The front tires of a car are steering tires and wear out more quickly. To reduce front tire wear, perform a four-tire rotation every 5,000 kilometers after the first maintenance, preferably in a diagonal pattern. 4. Perform wheel alignment periodically: If the vehicle shows signs of pulling to one side or other abnormal steering behaviors, conduct a wheel alignment promptly to prevent further tire issues. Four-wheel alignment ensures even force distribution across all four tires, avoiding excessive wear. 5. Repair punctures promptly: If a tire is punctured by a nail, even if there's no air leakage, replace it with the spare tire as soon as possible and repair the punctured tire.
7
0
Share

Can I Apply for ETC Without a Credit Card?

You can apply for ETC with a debit card even without a credit card. According to the "Implementation Plan for Accelerating the Application Service of Electronic Non-stop Toll Collection on Highways" issued by the Ministry of Transport, you need to bring the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate (the page with the most recent annual inspection stamp). If applying on behalf of someone else, you also need to provide the original valid ID card of the agent. If applying for ETC through the business halls of major banks, you will also need to prepare a debit card or credit card from the corresponding bank. Some banks only support ETC binding with credit cards, while others may require freezing a portion of the amount as a security deposit when binding ETC with a debit card. ETC Deduction Principle: There will be one or more ETC lanes on the highway. Through microwave dedicated short-range communication between the vehicle-mounted electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, and using computer networking technology for background settlement with the bank, the purpose of paying road and bridge tolls without stopping at the toll station is achieved. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More Policy Support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban agglomerations will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a clear target in the main indicators of comprehensive transportation development during the "13th Five-Year Plan" period: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More Future Possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with the development directions of smart transportation, such as vehicle-to-vehicle communication and vehicle-road coordination, to provide vehicle owners with comprehensive travel services. This means that more application scenarios will support ETC applications. ETC Usage Notes: The ETC transaction sensing area is 8 meters. When encountering a stationary vehicle ahead, to prevent the ETC device of the vehicle ahead from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatically sensing and paying for the vehicle ahead. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, which will also result in a failed deduction. Unauthorized disassembly or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service hall for testing. If the loosening or detachment is not due to human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also result in a failed deduction. You can follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. If the car windshield is too thick, it may cause poor sensing. This is especially important for vehicles that have been repaired after an accident with a replaced windshield or for those who have modified their front windshield.
20
3
Share

What are the causes of vehicle braking deviation?

Here are the reasons for vehicle braking deviation: 1. Irregular left-right deviation: Severe uneven tire wear, especially when the diameter difference between the inner and rear tires is significant, leading to more severe irregular braking deviation. 2. Negative toe-in or looseness in the tie rod and drag link ball joints. 3. Sudden braking deviation: Sudden failure in the braking system or suspension components. 4. Regular directional deviation: Uneven clearance between the front wheel brake drums and friction linings, significant difference in the contact surfaces of the front wheel friction linings, different quality of the front wheel friction linings, excessive difference in the inner diameter of the front wheel brake drums, and unequal spring tension of the front wheel brake shoe return springs. Here are the solutions for vehicle braking deviation: 1. Reasonable tire allocation and rotation as per regulations to ensure uniform wear. 2. If tires wear normally but braking deviation still occurs, check for negative toe-in or looseness in the tie rod and drag link ball joints. 3. Strictly follow the vehicle inspection requirements before and after trips to thoroughly check the braking system or suspension components. 4. Check for oil leakage in the wheel brake pipelines and ensure adequate tire pressure.
2
2
Share

How to Deal with Foggy Side Windows in the Car on Rainy Days?

Press the defogging button, turn on the air conditioning cooling (A/C) switch, adjust the temperature to the lowest, and turn on the external circulation to defog. Both cold and warm air can be used to defog the car windows, but warm air is slower than cold air. The most effective method is to use cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving the purpose of defogging. The method of using warm air to defog is the same as using cold air, but it should be noted that warm air should not be used for defogging on rainy days, as it will initially increase the fog. When the car windows fog up, external circulation should be turned on. The reason for car window fogging: There is a certain temperature difference between the inside and outside of the car. If the temperatures inside and outside the car are different, the surface of the side with the lower temperature will have a saturated vapor pressure lower than the surrounding environment's vapor pressure, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in fog. Methods to defog car windows: Air conditioning cooling: Use the air conditioning's cooling and dehumidifying function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car and the air conditioning is not turned on in time, the exhaled air has high humidity, and the windshield will quickly fog up. At this time, you can turn on the air conditioning to blow cold air onto the windshield, using the air conditioning's dehumidifying function to remove the fog on the windshield quickly. However, if the humidity is too high and the air conditioning is not effective, you can slightly open the window to quickly reduce the humidity inside the cabin. Of course, it can also be used in combination with the air conditioning for faster results. Air conditioning warm air: Use the method of reducing the temperature difference to remove fog. In winter, use warm air to blow hot air onto the glass, quickly raising the temperature of the windshield and reducing the temperature difference between the inside and outside surfaces of the window glass, which can prevent excessive fogging of the windshield in time. However, it should be noted that the rear and side windows heat up slowly, so it takes a longer time to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification; the air conditioning temperature control should not be set to the coldest position, otherwise, the outer surface of the windshield may fog up after prolonged use. Spraying anti-fog agents for prevention: Spray a small amount of defogging agent on the car windows and wipe it clean to remove dirt and stains from the glass. While polishing the glass, a thin transparent protective film is formed on the glass, which can effectively prevent water vapor from condensing on the glass and forming fog, especially suitable for cold winters. Alternatives to defogging agents include dishwashing liquid, soapy water, glycerin, alcohol, or salt water. After drying, use chamois or a soft dry cloth to wipe off excess fibers, ensuring the car windows remain fog-free for several days. Opening windows for convection: If the fog inside the car is not heavy, you can open the side windows to create convection between the inside and outside air, reducing the temperature difference and allowing the fog to disappear slowly. The principle of this method is the same as using cold air from the air conditioning. The downside of opening windows for convection is very obvious: it cannot be used in rain or snow, on highways, or when the fog is heavy. Rear window heating: Most cars have a rear window electric heating function, although the button positions may vary, the function is the same. Turn on the window heating switch, and the fog on the rear window will disappear in about a minute.
14
2
Share

What engine is in the Hyundai Elantra 1.6?

The Elantra 1.6 engine is a naturally aspirated G4LD, an inline four-cylinder engine with a maximum power of 130kW and a maximum torque of 157Nm. The Elantra has three engine options: the naturally aspirated G4FL, the turbocharged G4LC, and the naturally aspirated G4LD. Below is an introduction to the 1.6 engine: 1. The 1.6 naturally aspirated engine features variable valve timing, which generates an electronic control system. The valve timing can adjust appropriately according to the engine's operating conditions, ensuring high intake efficiency under any working state. This allows the engine to operate smoothly while improving fuel economy. The engine's overall structure is simplified, with a more compact internal layout, reducing its weight and effectively minimizing the space occupied in the engine compartment. 2. The direct injection technology in the 1.6 naturally aspirated engine is prone to carbon buildup. Prolonged use can lead to carbon deposits, affecting engine performance. It is recommended that owners clean the engine carbon deposits every 20,000 to 30,000 kilometers.
9
0
Share

How to Set the Time on a Bora?

The time on the Bora's dashboard can be adjusted using the buttons below the dashboard display. The left button adjusts the hours, and the right button adjusts the minutes. First, press the left menu button until the numbers on the trip computer flash, then use the right button to make the adjustments. Here are some details about the dashboard: 1. Generally, conventional car dashboards include a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge. 2. The most prominent feature on the dashboard is the speedometer, which displays the car's speed in km/h. The speedometer actually consists of two gauges: a speed indicator and an odometer. 3. Car dashboards also require a voltage regulator to stabilize the power supply voltage, suppress fluctuations, and ensure the accuracy of the dashboard readings.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.