How to Track the Delivery of New Vehicle License Plates?

What does Aowei 11-liter mean?

Aowei 11-liter refers to the engine's displacement. Displacement: Displacement refers to the exhaust volume, which is the volume swept by the piston from top dead center, also known as single-cylinder displacement, and depends on the cylinder bore and piston stroke. The displacement of an internal combustion engine is the sum of the working volumes of all cylinders, usually expressed in liters (L). Working Principle: Exhaust volume is the gas expelled by the piston from one stroke to another during the engine's operation when a specific cycle delivers air into the cylinder. Theoretically, during the exhaust stroke, the exhaust gas in the cylinder should be completely expelled by the piston, hence it is often referred to as 'piston displacement'.

19

2

Share

How to Check if the Front of the Car is Aligned from Inside the Vehicle?

Methods to check if the front of the car is aligned from inside the vehicle: You can use the wipers and road markings as reference points, maintaining a fixed distance or angle while driving. If the car deviates, it indicates the front is not aligned. When adjusting the steering wheel, avoid large movements as this can easily cause the vehicle to shake and lose control. Keep adjustment movements within the range of half a finger width to three finger widths. Another important aspect regarding the steering wheel is the grip. An incorrect grip can also lead to misalignment of the front of the car. Therefore, the correct grip is the '9 and 3 o'clock' position. While holding the steering wheel, the left hand should primarily control the steering, while the right hand rests lightly on it for easy gear shifting.

10

1

Share

How to Deal with Gearbox Jerking in Peugeot 308?

Persistent impurities and dirt have formed inside the gearbox, which can clog the control pipelines, causing delays in the automatic transmission control valve and resulting in gearbox jerking and impact. It is recommended to try cleaning the gearbox carbon deposits. The methods to address gearbox jerking in Dongfeng Peugeot 308 are as follows: 1. Check whether the gearbox temperature is normal. If not, proceed to inspect the gearbox cooling system. If the cooling system is functioning properly, proceed to the next step. 2. Reprogram and reset the gearbox computer system. 3. Replace the gearbox oil, which should be changed at least every 2 years or 40,000 kilometers. 4. Inspect the internal valve body of the gearbox for any damage.

4

5

Share

What are the letters of the Phaeton?

The letters of the Phaeton are 'Phaeton'. The Phaeton is Volkswagen's first full-size luxury sedan, with body dimensions of 5175mm in length, 1903mm in width, and 1450mm in height, a wheelbase of 3001mm, and a fuel tank capacity of 90L. The Phaeton is equipped with three engines: one is a 3.2-liter V6 engine with a maximum power of 177 kW and a maximum torque of 315 Nm; another is a 4.2-liter V8 engine with a maximum power of 246 kW and a maximum torque of 430 Nm; and the third is a 6-liter W12 engine with a maximum power of 309 kW and a maximum torque of 550 Nm, paired with a five-speed automatic transmission.

11

5

Share

Does repainting the original car have any impact?

Repainting the original car has an impact. Impact on the residual value of used cars: Nowadays, used car inspectors carry paint thickness gauges for examination. Abnormal readings on the paint thickness gauge indicate that the car's paint has undergone repainting. Generally, a used car that has been fully repainted will see a price reduction, depending on the actual situation. Damage to the phosphating layer and electrophoretic layer of the original paint: These two layers are relatively important for preventing corrosion of the metal substrate. Ordinary repainting processes cannot restore them, which is why rust may appear after repainting. Additionally, no matter how advanced the repainting technology is, issues like color differences and paint aging will gradually emerge over time.

5

Share

How to Solve Electronic Steering Lock Failure?

To address electronic steering lock failure, first analyze the cause of the issue. Inspect the steering gear, steering pump control valve, oil cup filter, and steering fluid, then clean the entire power steering system to troubleshoot. Common causes of electronic steering lock failure include: 1. Excessive dirt inside the oil cup: clogged filter or low oil level. 2. Significant air in the power steering system. 3. Foreign objects in the steering system: causing the steering pump flow control valve to stick. 4. Insufficient tire pressure: interference with the steering column, loose connections, loose or slipping pump belt, or loose pump installation. 5. Loose bolts at various tubing connections: leading to steering fluid leakage. 6. Excessive wear of the steering gear piston cylinder: poor oil seal performance, control valve sticking, or damage.

7

3

Share

How to Track the Delivery of New Vehicle License Plates?

What does Aowei 11-liter mean?

How to Check if the Front of the Car is Aligned from Inside the Vehicle?

How to Deal with Gearbox Jerking in Peugeot 308?

What are the letters of the Phaeton?

Does repainting the original car have any impact?

How to Solve Electronic Steering Lock Failure?

What tires does the Changan CS35 use?

How many bars on the temperature gauge are normal?

What Causes a Tire Blowout?

How to Remove a License Plate?