How to Temporarily Handle a Flat Tire on an Electric Car?

How to Determine if a Wheel Bearing is Damaged?

There are several methods to determine if a wheel bearing is damaged: 1. Observe whether the vehicle emits a humming noise during driving. The noise from a damaged bearing is different from the engine's inherent noise. Open the window to check if the sound is coming from outside the vehicle. 2. Place your left hand on the shock absorber spring and rotate the tire with your right hand. Feel the vibration with your left hand to observe if the spring has significant vibration. If the spring vibrates noticeably, it indicates bearing damage. 3. Make a temporary stop and check the temperature of the wheel hub. If there is a significant temperature difference between the front and rear wheels, it indicates bearing damage. 4. Hold the wheel firmly and shake it back and forth, up and down, to check for any looseness in the wheel bearing. If there is looseness, it indicates bearing damage.

13

0

Share

Why Do Car Ignition Coils Fail?

Car ignition coils fail due to insulation layer aging and breakdown or damage to the switching transistor. A large spark plug gap increases the load on the primary coil, leading to excessive heat and faster insulation aging. Conversely, a small spark plug gap results in higher discharge current in the secondary coil, also causing excessive heat and rapid insulation aging. Assembled ignition coils may have poor insulation material durability, high internal resistance leading to excessive heat, and lower-quality transistors, resulting in a shorter lifespan. The core components of the ignition system are the ignition coil and the switching device. Increasing the energy of the ignition coil enables the spark plug to generate sparks with sufficient energy, which is a fundamental requirement for the ignition system to adapt to modern engine operations. Typically, an ignition coil contains two sets of windings: the primary coil and the secondary coil.

18

1

Share

What does it mean when the steering system malfunction indicator light is on?

When the steering system malfunction indicator light is on, it indicates a fault in the power steering system. There are two specific scenarios: 1. If the light is yellow: It means the steering system is partially malfunctioning, and more force is required to turn the steering wheel. 2. If the light is red: It means the steering system has completely failed, and significant force is needed to turn the steering wheel. Here is additional information about the steering system: The automotive steering system (steering-system) is a series of devices used to change or maintain the direction of a vehicle's movement, whether forward or backward. Its function is to control the vehicle's direction according to the driver's intention. The steering system is crucial for driving safety, and along with the braking system, it is one of the two systems that must be given high priority for vehicle safety.

2

Share

Which country produces Peugeot?

Peugeot cars are produced in France. Here is more information about Peugeot: 1. Dongfeng Peugeot is a joint venture model produced by Dongfeng Motor Manufacturing Plant, which belongs to Chinese production: In October 2002, Dongfeng Motor Corporation and the French PSA Group, also known as Peugeot Citroën Group, signed an expanded cooperation joint venture contract. The two major groups joined forces to fully develop a new blueprint for introducing the Peugeot brand into China, and Dongfeng Peugeot was born. 2. Dongfeng Peugeot car models: Peugeot 2008, Peugeot 3008, Peugeot 408, Peugeot 508, Peugeot 308, Peugeot 308S, Peugeot 301, Peugeot 307; imported Peugeot car models include Peugeot 4008, Peugeot 308SW, Peugeot 207CC, Peugeot 308CC, Peugeot RCZ, Peugeot 5008. 3. Peugeot cars have the most romantic and unique appearance with a touch of elegance: they are suitable for a wide range of ages and occasions. However, Peugeot is relatively slow in updating its powertrain systems, but this means they are mature, reliable, durable, and require less maintenance.

9

2

Share

What to Do If a Vehicle Fails Emission Inspection?

Here are the methods to address a vehicle failing emission inspection: 1. Poor Fuel Quality: If low-quality fuel is frequently used, it can lead to excessive carbon deposits after combustion and may impair the performance of the exhaust purification system, reducing its lifespan and increasing pollutant emissions, resulting in failed tailpipe emissions. Therefore, before the annual inspection, it is advisable to fill up with high-quality gasoline and drive on the highway before testing. 2. Clogged or Poisoned Catalytic Converter: Frequent low-speed driving or the use of inferior fuel can cause the catalytic converter to clog or become poisoned and malfunction. In such cases, you can purchase professional cleaning agents to remove and clean the catalytic converter or drive at high speeds for a distance. High-speed driving is effective in cleaning the engine's fuel system and cylinders. Additionally, at high engine speeds, fuel burns more completely, helping to flush out dirt and impurities from the fuel system and remove carbon deposits from the valves, clearing blocked passages and achieving a cleaning effect. Additional Information: For non-commercial vehicles that fail emission inspections, the public security department will temporarily confiscate the vehicle's license until the issue is resolved and standards are met before allowing the vehicle back on the road. For commercial vehicles, the municipal transportation bureau will suspend their operational qualifications until the issue is resolved and standards are met before allowing them back into service. If a vehicle fails the emission inspection three times, it may face mandatory scrapping, which is an important point to note.

7

2

Share

Will vehicles whose front has crossed the stop line when the yellow light is on be penalized?

When the yellow light is on, vehicles whose front has crossed the stop line may continue to pass, while vehicles whose front has not crossed the stop line will be considered as running a yellow light if they continue to move forward, which is a traffic violation. The following is a relevant introduction about traffic violations: 1. Definition: Traffic violations refer to the behavior of vehicle drivers, pedestrians, passengers, and units and individuals related to road traffic activities that violate the "Road Traffic Safety Law of the People's Republic of China" and related laws, regulations, and traffic management rules. 2. Hazards: Leading to traffic disorder, causing accidents, affecting city appearance, and creating public hazards.

14

3

Share

How to Temporarily Handle a Flat Tire on an Electric Car?

How to Determine if a Wheel Bearing is Damaged?

Why Do Car Ignition Coils Fail?

What does it mean when the steering system malfunction indicator light is on?

Which country produces Peugeot?

What to Do If a Vehicle Fails Emission Inspection?

Will vehicles whose front has crossed the stop line when the yellow light is on be penalized?

Where is the gear oil filler port on the Tiggo 3?

What is the equivalent displacement of a 1.8T engine?

Do You Need to Press the Clutch and Brake When Starting the Engine?

Does turning on the air conditioning in a car consume more fuel?