How to Tell When You're Running Low on Fuel from the Fuel Gauge?

1 Answers
SanRyder
07/30/25 1:58am
Here is the relevant information:1. The letter E on the fuel gauge: The method to check if the car is running low on fuel is: For analog fuel gauges, there is a letter E on the left side of the gauge. The closer the needle is to the letter E, the less fuel remains. For digital fuel gauges, fuel levels are indicated by illuminated segments. One remaining segment or no illuminated segments indicates that the fuel level is too low. Generally, when the fuel light comes on, you should refuel promptly to avoid running out of fuel and affecting normal driving.2. Disadvantages of low fuel levels: If the fuel level is too low, the fuel pump lacks lubrication, which can lead to damage or a shortened lifespan.3. Estimating fuel consumption based on the fuel gauge: Car owners can decide whether to refuel based on the remaining fuel amount displayed by the fuel gauge. If refueling is needed, the fuel gauge can also accurately display the amount of fuel added each time. The fuel gauge is not just a scale; it can also more precisely display the car's fuel consumption per kilometer and overall fuel consumption, indicating whether fuel is being used efficiently. The fuel gauge also reminds the owner of the remaining fuel and the estimated driving range.
Was this review help?
6
5
Share
More Forum Discussions

What are the common issues with the Yunnei D25 engine?

The common issue with the Yunnei D25 engine is that the cylinder head is prone to damage. Below is relevant information about this engine: 1. Power performance: In the National IV phase, it delivers a maximum horsepower of 143Ps and a maximum torque of 360N.m. In the National V phase, it offers a maximum horsepower of 143Ps and a maximum torque of 400N.m. In the National VI phase, it provides a maximum horsepower of 163Ps and a maximum torque of 400N.m. 2. Applicable models: This engine has been widely used in various brands of light trucks during the National IV phase, including specific models such as JAC Junling, Sinotruk HOWO light truck, and Dayun Aopuli.
19
1
Share

What are the length, width, and height dimensions of a sedan's trunk?

Different sedan models have varying length, width, and height dimensions for their trunks. Below is relevant information about sedan trunks: 1. Introduction to trunk volume: Generally, hatchbacks have a volume of 130-290 liters; sedans typically range from 350-580 liters; SUVs usually fall between 300-600 liters. 2. Introduction to compact sedan models with larger trunk volumes: The Ford Focus sedan has a trunk volume of 526L; the Volkswagen Sagitar—TSI+DSG comes standard with ESP across all models and offers a trunk volume of 527L; the Skoda Octavia provides 560L of trunk space, which dramatically increases to 1350L when the rear seats are folded down; the Peugeot 307 sedan boasts a trunk capacity of 620L.
6
4
Share

Which button is used to exit the mute mode in the Buick GL8?

The button to exit the mute mode in the Buick GL8 is the hang-up button on the steering wheel. Below are the specific details about the Buick GL8: Positioning and Model: The Buick GL8 is a mid-to-high-end MPV launched by SAIC-GM Buick. Power System: It is equipped with a 2.0T SIDI direct-injection turbocharged engine, which has a maximum power output of 191 kW and a maximum torque of 350 Nm. In terms of the transmission system, the engine is paired with a 6-speed automatic manual transmission. During operation, the engine can deliver its maximum power at 5400 rpm and its maximum torque between 2000-5000 rpm.
1
4
Share

What is the gear usage instruction for the Prado?

The gear instructions for the Prado are as follows: Gear lever: The gear lever is located in the middle of the cabin. The topmost gear is the P (Park) gear, which is used for parking. The R (Reverse) gear is for reversing; engage this gear when reversing. Engaging the N (Neutral) gear puts the vehicle in neutral, which can be used for short stops. Important notes: The vehicle can only be started in P or N gear. To shift out of P gear, the brake must be pressed. Generally, when shifting between N, D, and 3 gears, there is no need to press the shift button. However, when shifting from 3 to lower restricted gears, the shift button must be pressed. Shifting from lower to higher gears does not require pressing the shift button. Never shift into N gear while driving to coast.
6
2
Share

How does the tire pressure monitoring system work in Volkswagen vehicles?

Volkswagen's tire pressure monitoring principle utilizes data transmitted by the ABS system sensors to monitor the rotational speed of each wheel and changes in their rolling circumference. Below are the relevant details: 1. If the rolling circumference of any wheel changes, the warning light will illuminate. Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, alerting drivers to tire leaks or low pressure to ensure driving safety. 2. When tire pressure is too high, it reduces the contact area between the tire and the ground, while the pressure borne by the tire increases relatively, affecting the tire's grip. 3. Additionally, when the vehicle passes over potholes or bumpy roads, insufficient space inside the tire to absorb vibrations not only impacts driving stability and ride comfort but also increases the impact on the suspension system, posing further risks. Moreover, the potential for tire blowouts in high temperatures also increases accordingly.
3
5
Share

Is it okay for the engine compartment to be hot in summer?

In summer, the temperature in the engine compartment can reach at least 60-70 degrees Celsius, which is within the normal range. The circuits in the engine compartment mainly consist of capacitors, resistors, and transistors. Below is an introduction to the temperature tolerance of these components: 1. Capacitors: The most heat-sensitive are electrolytic capacitors, with a tolerance temperature not exceeding 105 degrees Celsius. 2. Resistors: Metal oxide film resistors, depending on their power rating, can withstand temperatures between 125-235 degrees Celsius. 3. Transistors: The high-temperature limit for silicon PN junctions is generally 175 degrees Celsius; the lower the temperature, the significantly increased lifespan and reliability.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.