How to tell if the exhaust pipe has water ingress?

1 Answers
JaydenLynn
07/30/25 10:01am
If water enters the car's exhaust pipe, you can go to a 4S shop for simple cleaning and drying, which will allow the engine to function normally again, and the repair cost is relatively low. If water enters the car's exhaust pipe and causes the engine to stall, do not attempt to force-start the engine. Instead, immediately call for roadside assistance.
Was this review help?
19
2
Share
More Forum Discussions

What is the height of the Jetour X95?

Jetour X95 has a height of 1780mm, with a length and width of 4875mm and 1925mm respectively, and a wheelbase of 2855mm. The Jetour X95 is a mid-size SUV equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.6-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 230 Nm, featuring multi-point fuel injection technology and using an aluminum cylinder head with a cast iron cylinder block. The 1.6-liter turbocharged engine produces 197 horsepower and a maximum torque of 290 Nm, equipped with direct fuel injection technology and utilizing an aluminum cylinder head and block.
3
1
Share

How to Open the Hood of a Wrangler?

Method to open the hood of a Wrangler: 1. There are two latches on each side of the Wrangler's front end; 2. Pull these two latches apart to open the hood. The Wrangler is a Chrysler Jeep model, representing the top-tier version of the Chrysler Jeep Wrangler series and one of the most robust models in the Jeep lineup, a true ORV (Off-Road Vehicle). The core technology of the Wrangler is the RockTrac part-time four-wheel-drive system. Part-time four-wheel drive allows the driver to manually engage or disengage the transfer case to switch between two-wheel or four-wheel drive modes. This relatively pure system requires the driver to assess road conditions and select the appropriate drive mode based on their experience.
20
5
Share

What are the symptoms of a faulty carbon canister purge solenoid valve in a car?

The symptoms of a faulty carbon canister purge solenoid valve in a car: 1. Gasoline smell inside the car, because when the solenoid valve is damaged, the engine cannot timely draw gasoline vapor from the carbon canister, the activated charcoal becomes saturated and can no longer adsorb, causing the gasoline vapor entering the carbon canister to be unable to be drawn, resulting in a gasoline smell in the air; 2. Jerking during rapid acceleration, because the solenoid valve cannot open, the ECU reduces the fuel injection quantity, leading to a lean air-fuel mixture and insufficient power causing jerking; 3. Difficulty starting the engine, because when the carbon canister purge solenoid valve is constantly open, the fuel tank and the engine intake manifold are directly connected, allowing a large amount of gasoline vapor to enter the intake manifold when the car is parked, resulting in a rich air-fuel mixture when starting the engine, making it difficult to start.
9
4
Share

Can the car headlight cover be replaced?

Car headlight covers can be replaced. If the headlight cover is broken, it is recommended to replace it. Failure to do so may lead to water ingress, which not only affects the brightness of the headlights but can also cause short circuits and damage to the electrical system. Some car owners may use tape or purchase adhesive to repair a damaged cover, but these methods can severely impair the light output of the headlights and should be avoided if possible. Replacing the headlight cover by oneself is quite complex and requires a certain level of DIY skill, including removing the headlight assembly and using a heat gun to soften the adhesive to ensure a proper seal. It is advisable to replace the entire headlight assembly if the cover is broken, as replacing just the cover may not guarantee its sealing performance.
17
3
Share

Is the Volkswagen Tayron's transmission dry or wet?

Volkswagen Tayron's transmission is wet, as it is equipped with a wet dual-clutch transmission across all models. The wet dual-clutch transmission offers better reliability and stability, and it can withstand higher torque. The Tayron is a mid-size SUV under the Volkswagen brand, featuring three engine options: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. The Tayron is built on the MQB A2 platform and is based on the European version of the Tiguan. In terms of dimensions, it measures 4595mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm.
4
2
Share

What Happens If You Shift Gears Without Pressing the Clutch?

Shifting gears without pressing the clutch is impossible. When attempting to shift gears without depressing the clutch while the car is in motion, the transmission gears remain engaged, making gear shifting unfeasible. The clutch is located within the flywheel housing between the engine and the transmission. During driving, the driver can press or release the clutch pedal as needed, temporarily disconnecting or connecting the engine and the transmission. The clutch is a common component in mechanical transmissions, allowing the drivetrain to be separated or engaged at any time. However, pressing the clutch does not mean you can shift gears arbitrarily. Gear shifting must also be determined by the vehicle's speed, and the selected gear must match the car's speed to complete the shift successfully.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.