How to Take the Subject 3 Test with a Temporary ID Card Without Magnetic Stripe?

1 Answers
LeKingston
07/30/25 4:51am
You can still take the Subject 3 test without a magnetic stripe on your ID card. According to the regulations for applying for and using a driver's license, as long as you hold valid identification, you are eligible to take the test. Both a regular resident ID card and a temporary resident ID card are generally considered valid forms of identification and hold the same legal effect. Below is additional information: 1. You cannot practice for the Subject 3 test in a private car: During the Subject 3 test process, you are only allowed to practice using the driving school's vehicles. Before obtaining a driver's license, you are not permitted to drive any other vehicles except those provided by the driving school. Violating this rule will result in penalties for driving without a license, so this point must be clearly understood. 2. Registering for Subject 4: After passing the Subject 3 test, you can schedule the Subject 4 test. If time permits, you can complete it on the same day. Upon passing the Subject 4 test, you will receive your driver's license, allowing you to legally drive a car. This is a lawful process, and the driver's license is a legally recognized document, so you can use it without any concerns.
Was this review help?
7
0
Share
More Forum Discussions

How to Add Windshield Washer Fluid to a Golf?

Golf windshield washer fluid refill location introduction: On the left side of the Golf's engine near the headlight, there is a blue cap. Simply open it and add the windshield washer fluid. The so-called windshield washer fluid is commonly known as car windshield cleaning solution. It is a consumable item in automotive use. High-quality car windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Car windshield washer fluid is commonly referred to as glass water. Glass water is mainly divided into three categories. Below is the relevant content introduction: 1. The first category: Summer-specific. This type of glass water adds insect removal glue to its original composition, allowing it to quickly remove insect residues from the windshield. 2. The second category: Ordinary winter glass water, also known as anti-freeze glass water. This type of glass water generally ensures that it will not freeze or damage car facilities even when the outside temperature is below -20°C. 3. The third category: Special anti-freeze glass water. This type of glass water can remain unfrozen even at -40°C, making it suitable for use in extremely cold regions.
8
5
Share

How to open the fuel tank on the 10th-generation Civic?

The method to open the fuel tank cap of the 10th-generation Civic is as follows: Turn off the engine, press the indicated area in the direction of the arrow to release the fuel filler door, slowly unscrew the fuel filler cap. If a hissing sound is heard, wait until it stops, then slowly turn the knob to open the fuel filler cap. Below is an introduction to the 10th-generation Civic: 1. Safety features: It adopts Honda's new HONDASENSING (Safety Sense) driver assistance system. This system not only senses external environmental information but also identifies the driver's operational intent and vehicle status. Based on this comprehensive data, it precisely coordinates control over braking, steering, etc., thereby achieving excellent driving assistance functions. 2. Configuration: The new model comes standard with LED daytime running lights/tail lights/fog lights, a full LCD instrument panel, a multifunction steering wheel, one-touch start and keyless entry, a start-stop system, 6 airbags, VSA vehicle stability assist system, and a 7-inch smart screen connectivity system.
16
5
Share

Is Tesla Shanghai a Joint Venture?

No, it is a wholly-owned company. Tesla has established a Gigafactory in China, located in Shanghai, which is a wholly-owned facility. The construction of Phase 1 of Tesla's Gigafactory began on January 7, 2019, at the intersection of Lianggang West Avenue and Zhengjia Road in the southeastern part of Shanghai. The factory produces Tesla Model 3 and Model Y vehicles. Below are the specifications for these two models: 1. Model 3 dimensions: The vehicle's length is 4694 mm, width is 1850 mm, height is 1443 mm, wheelbase is 2875 mm, front track is 1580 mm, rear track is 1580 mm, minimum ground clearance is 138 mm. It is a four-door, five-seater sedan with a trunk capacity of 425 liters. 2. Model Y dimensions: The vehicle's length is 4750 mm, width is 1921 mm, height is 1624 mm, wheelbase is 2890 mm, front track is 1636 mm, rear track is 1636 mm. It is a five-door, five-seater SUV model.
15
5
Share

Is it better to install a roof rack on the RAV4 or not?

The modification or installation of a roof rack should be determined by the intended use of the vehicle. Non-commercial cargo transportation is not restricted, and personalized storage for self-driving tours is also unrestricted as long as safety is ensured. Here is additional information: 1. Height standards: Regulations clearly state that for small and micro passenger vehicles, cargo can only be carried on the roof rack, excluding the trunk. The height from the roof should not exceed 50 centimeters, and the total height from the ground should not exceed 4 meters. Ordinary family vehicles such as MPVs, SUVs, ORVs, and sedans typically do not exceed the 4-meter standard. Moreover, the 50-centimeter vertical space from the roof, even for sedans, offers more storage capacity than the trunk, making the roof rack highly practical when utilized effectively. 2. Function of the roof rack: The primary purpose of a roof rack is for cargo transportation. During holidays or travel, it proves to be very useful, allowing you to carry many items without occupying space inside the car, which is very convenient.
6
0
Share

Is Reverse Gear the R Gear?

Reverse gear is indeed the R gear, whether in manual transmission or automatic transmission vehicles. In manual transmissions, the gears are typically divided into 1st gear, 2nd gear, 3rd gear, 4th gear, 5th gear, and R gear, where gears 1 through 5 are forward gears, and R is the reverse gear. Some models now come with a 6th gear. Generally, in manual transmissions, 1st gear is at the top left, 2nd gear at the bottom left, 3rd gear at the upper middle, 4th gear at the lower middle, 5th gear at the top right, and R gear at the bottom right, with the center position being neutral, which is the gear used when waiting at a red light or parking. In automatic transmissions: D gear is the drive gear, N gear is neutral, and R gear is the reverse gear. The reverse gear, fully known as the reverse driving gear, is one of the three standard gears in a car, marked as R on the gear console, designed to allow the vehicle to move backward, and is considered a special driving gear.
19
2
Share

Does Intake System Cleaning Include the Throttle Body?

Intake system includes: air filter, throttle body, intake manifold and fuel injector. The details of the intake system are as follows: 1. When the engine is running, the driver controls the throttle opening through the accelerator pedal to change the intake air volume and regulate engine operation. Air entering the engine first passes through the air filter to remove dust and other impurities, then flows through the air flow meter, enters the power chamber via the throttle passage, and is distributed to each cylinder through the intake manifold. During cold idle operation, some air bypasses the throttle body and enters the cylinder through the auxiliary air valve or idle control valve. 2. Intake system cleaning includes the throttle body. The main function of the intake system is to deliver clean, dry, sufficient and stable air to meet engine requirements, preventing impurities and large particles from entering the combustion chamber and causing abnormal engine wear. 3. Another important function of the intake system is noise reduction. Intake noise not only affects the vehicle's pass-by noise but also impacts cabin noise, significantly influencing ride comfort. Poor intake system design directly affects engine power and noise quality, which relates to the vehicle's overall ride comfort. Properly designed muffler components can reduce subsystem noise, thereby improving the vehicle's NVH performance.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.