How to take the C1 Subject 2 test?

1 Answers
Rylee
07/29/25 7:13pm
Reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. It is necessary to master the basic driving operation essentials and have the basic ability to control the vehicle.
Was this review help?
7
0
Share
More Forum Discussions

What category of vehicles does Hyundai belong to?

Hyundai belongs to the Korean vehicle category. Hyundai is a South Korean automobile brand, with the full company name being Hyundai Motor Company. Its main vehicle models include Elantra, Santa Fe, Tucson, and Sonata, offering several China-specific versions. In China, it has established Beijing Hyundai. Beijing Hyundai refers to Beijing Hyundai Motor Co., Ltd., a Sino-foreign joint venture established on October 18, 2002. Several main vehicle models of Hyundai: Mistra: The Mistra is an intermediate car specifically tailored for the Chinese market, featuring a grand and steady design. The 1.8L model offers ample power, and the Mistra is highly cost-effective. Verna: The Verna is a low-end compact car under Beijing Hyundai. The Verna is relatively affordable, and as a joint-venture brand, its technology is more mature. Beijing Hyundai ix35: The ix35 is a compact multi-purpose vehicle (MPV) under Beijing Hyundai's own brand, primarily targeting the general public who prefer compact MPVs. ENCINO: The ENCINO is a compact SUV under Beijing Hyundai. One of its standout features is its powerful performance, equipped with a 1.6T+7DCT powertrain and a stylish exterior design.
6
0
Share

What are the reasons for the Buick Excelle stalling at low speed?

Vehicle suddenly stalls during driving for the following specific reasons: 1. Circuit failure: This possibility is due to low-voltage power failure during driving, causing the engine to stall. Mainly check the ignition and starter switches, as well as the fuse box. Low-voltage circuit short circuit causes intermittent stalling. Inspect the low-voltage circuits. 2. Component failure: This issue is generally related to the ignition coil, capacitor, or electronic ignition module. The vehicle may start initially but stall after a while, then restart and stall again. 3. Fuel system failure: Possible causes include damaged fuel pump, ruptured fuel line, clogged carburetor fuel inlet, or empty fuel tank. In such cases, the vehicle can be restarted but with great difficulty.
12
3
Share

Can You Still Drive on the Highway When the Vehicle Stability Control System Warning Light Comes On?

When the vehicle stability control system warning light comes on, you should not drive on the highway. Reduce your speed, avoid excessive steering and turning, and find a nearby repair shop as soon as possible. Use a diagnostic scanner to read the specific fault code, and then proceed with repairs based on the fault code. Possible causes of a vehicle stability control system malfunction include: ABS pump failure or issues with the ABS pump's power and grounding circuits, loose sensor connectors or a malfunctioning sensor, blown or burnt fuses, blocked system signal transmission, or false alarms from the system. Try pressing the off button to restart the system. When the drive wheels slip, the engine speed decreases to reduce power output, while the ESP control unit brakes the slipping drive wheels to prevent skidding and ensure proper power delivery. In cases of understeer, the vehicle stability control system brakes the inner rear wheel to correct the tracking direction. When the ESP light on the dashboard illuminates, it serves as a reminder to the driver that there may be an issue with the stability control system, requiring prompt inspection and repair.
11
3
Share

Is it harmful to shift into P gear before the car comes to a complete stop?

Shifting into P gear before the car comes to a complete stop is generally not a problem if it happens occasionally. However, frequently engaging the P gear while the vehicle is in motion can have negative effects on the car. The P gear is a locking mechanism that engages with the transmission gears. Shifting into P gear before the car stops can damage the locking gear, leading to potential issues over time. Typically, the P gear in an automatic transmission is engaged when the vehicle is parked to lock the transmission and prevent the car from rolling on slopes. If the P gear is engaged while driving, it can harm the transmission. In such cases, immediately shift back to a driving gear, slow down, and pull over to stop. Then, restart the car and begin driving from the forward gear. If no unusual noises are heard, there should be no problem. Transmission issues can significantly affect vehicle performance and reduce driving control. To prevent transmission damage, it is crucial to use the P, D, R, and N gears correctly. Remember, the R and P gears in an automatic transmission are meant to be engaged only when the vehicle is stationary. Never shift into P or R gear while the car is in motion.
20
2
Share

How many centimeters is 1J of wheel hub equal to?

1J of wheel hub equals 2.54cm, and the width of the wheel hub is equal to a number multiplied by 2.54cm in length. When the width of the wheel hub changes, the wheel hub widens or narrows uniformly as a whole, with the change in width being evenly reflected on both sides of the wheel hub. Introduction to wheel hubs: The wheel hub is the rotating part of the tire's inner rim connected to the wheel core through pillars, that is, the metal component mounted on the axle that supports the tire, also known as the rim, steel ring, or wheel. Wheel hubs come in various types based on diameter, width, forming method, and material. Types of wheel hubs: Depending on the characteristics and requirements of different vehicle models, the surface treatment process of wheel hubs also adopts different methods, which can be roughly divided into painting and plating. For ordinary vehicle models, the appearance of the wheel hub is less considered, with good heat dissipation being a basic requirement. The process generally involves painting treatment, which means spraying followed by electric baking, making it cost-effective with bright and long-lasting colors. Even when the vehicle is scrapped, the color of the wheel hub remains unchanged. Plated wheel hubs are further divided into silver plating, water plating, and pure plating types. Although silver-plated and water-plated wheel hubs have bright and vivid colors, they have a shorter retention time, making them relatively cheaper. Pure plated wheel hubs maintain their color for a long time.
17
3
Share

Is Car Chassis Soundproofing Effective?

Car chassis soundproofing is effective, but the effect is not very significant. Benefits of installing chassis soundproofing: Car chassis soundproofing primarily targets road noise generated by the friction between tires and the ground, which can significantly reduce such noise and greatly enhance driving safety for the owner. Applying vibration-damping strips and soundproofing cotton to the chassis will effectively absorb any vibrations and block heat. Methods for chassis soundproofing: Chassis soundproofing modifications can involve applying a layer of chassis armor on the exterior. Chassis armor is an elastic sealing material that can provide noise reduction from the outside. For interior chassis soundproofing materials, smooth-faced sound-absorbing cotton or 10mm textured sound-absorbing cotton can be chosen, combined with aluminum foil soundproofing and vibration-damping panels. Next, measure the noise levels in various parts of the car, then proceed to remove the interior trim carefully—avoid using excessive force to prevent damage to the trim and paint layers. After that, clean the chassis thoroughly, paying attention to the handling of any adhesives to avoid scratching the work surface or paint layers. Avoid using corrosive solvents.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.