How to take out the jack of Yaris L?

How many kilometers can an Accord travel on a full tank of gas?

An Accord can travel 700 to 800 kilometers on a full tank of gas, with a fuel tank capacity of 56L and a fuel consumption of 6L per 100 kilometers. The Accord is a mid-size car under GAC Honda. The Accord Comfort Edition has a maximum motor power of 143W and a maximum torque of 260 N·m, equipped with a CVT continuously variable transmission. The body dimensions are 4906X1862X1449mm in length, width, and height. Factors affecting fuel consumption: Traffic congestion or uneven road surfaces, driving for long periods in low gears, will increase fuel consumption; using the trunk as a storage space increases the vehicle's weight, and the relationship between vehicle weight and fuel consumption is directly proportional. For every 10% reduction in vehicle weight, fuel consumption will decrease by a corresponding percentage; incorrect driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, rapid acceleration and sudden braking are the most common issues.

8

3

Share

What is the fuel tank capacity of the Nissan Sylphy Classic?

2022 Nissan Sylphy Classic has a total of 3 models, all with a fuel tank capacity of 50L. The vehicles are equipped with a 1.6L naturally aspirated engine and feature front-engine, front-wheel drive. Among vehicles in the same class, the 2022 Civic has a fuel tank capacity of 47 liters, while the 2021 Xingrui has a fuel tank capacity of 50 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked tank capacity. Methods to open the fuel tank: Mechanical key opening: This method is usually seen in some rugged off-road vehicles. Most modern family cars do not use mechanical keys for opening the fuel tank due to its relative complexity. In-car switch method: The location of the in-car fuel tank switch varies by model. It may be found on the floor to the left of the driver's seat, on the left front door panel, or on the center console, all marked with a fuel pump icon. However, it's important to note that the in-car switch can easily lead to forgetting to turn off the engine before refueling, so drivers should always remember to turn off the engine before refueling. Press-to-open method: The press-to-open fuel tank door is currently the most convenient method. The driver only needs to park the car, and the fuel attendant can press to open the tank for refueling. However, when not refueling, drivers should always engage the central locking system; otherwise, the fuel tank cap can be opened.

4

0

Share

How to Purchase Insurance for Motor Vehicles?

To drive a car on the road, it is mandatory to purchase compulsory traffic insurance (CTPL). Additionally, other types of insurance can be purchased based on the owner's needs: 1. Compulsory Traffic Insurance (CTPL): CTPL is a mandatory insurance requirement. Consumers must purchase CTPL for their new cars to legally drive on the road. If a vehicle insured with CTPL is involved in a traffic accident, the insurance company will provide compensation within the coverage limits. 2. Vehicle Damage Insurance: If the insured or other permitted drivers cause an accident resulting in damage to the insured vehicle covered under vehicle damage insurance, the insurance company will bear the claim liability within reasonable limits, reducing the financial loss from vehicle damage. 3. Third-Party Liability Insurance: If the insured or other permitted drivers cause an accident involving a vehicle insured with third-party liability insurance, resulting in injury to a third party, and the insured is legally required to bear financial responsibility, the insurance company will cover the compensation. Third-party liability insurance generally serves as a supplement to CTPL, providing an additional layer of protection on top of CTPL. 4. No-Deductible Insurance: No-deductible insurance ensures full compensation (100%) for vehicle damage and third-party liability claims. By purchasing no-deductible insurance, the insured can transfer the portion of the claim they would otherwise bear to the insurance company, thereby reducing their financial burden after a traffic accident.

19

5

Share

What brand is the original engine oil for Beijing Hyundai?

The original engine oil brand for Beijing Hyundai is Mobis. For later maintenance and oil changes, options include ordinary Great Wall 5W20, South Korean SK's 5W30, and Shell's premium engine oil. The original API-SM/GF-4-SAE-5W-20 engine oil for Beijing Hyundai needs to be replaced every 5,000 kilometers. The Beijing Hyundai Tucson is equipped with a 1.6 turbocharged engine, which requires 5W-30 full synthetic engine oil for maintenance. The Hyundai 4S directly supplies the original premium gasoline engine oil A5, 5W-30 (4L pack), suitable for the entire range of Langdong, Mistra, Elantra, IX35, Tucson, Verna, Santa Fe, and Sonata. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C, with higher values indicating better viscosity retention at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing engine oil in Beijing Hyundai vehicles is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug, catching the old oil in a pan until no more oil flows. Start the engine for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the filler cap on the engine valve cover, generally filling up to three-quarters of the bottle; Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If any leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.

14

1

Share

What is the difference of Tayron R-Line?

Tayron R-Line is a model equipped with the R sports package, which includes components such as wheels, front and rear bumpers, side skirts, steering wheel, etc. Models equipped with the R sports package are referred to as R-Line versions. The Tayron is a mid-size SUV under the Volkswagen brand, and it comes with three engine options: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. All three engines are paired with a 7-speed dual-clutch transmission. Below is an introduction to the engines equipped in the Tayron: 1. Tayron's 1.4-liter turbocharged engine: This engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm. It achieves maximum power output at 5,000 to 6,000 rpm and maximum torque output at 1,750 to 3,000 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. Low-power 2.0-liter turbocharged engine: This engine delivers a maximum power of 137 kW and a maximum torque of 320 Nm. It achieves maximum power output at 5,000 rpm and maximum torque output at 1,600 to 4,000 rpm. The engine features hybrid injection technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. 3. High-power 2.0-liter turbocharged engine: This engine delivers a maximum power of 162 kW and a maximum torque of 350 Nm. It achieves maximum power output at 4,500 to 6,200 rpm and maximum torque output at 1,500 to 4,400 rpm. The engine uses an aluminum alloy cylinder head and a cast iron cylinder block.

10

3

Share

Is it possible not to install ETC?

It is possible not to install ETC. According to Article 19 of the "Notice on Vigorously Promoting the Development and Application of ETC on Highways" issued by the State Council, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual channels. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated before normal use. During free holiday periods, vehicles with ETC can still use the highways, and for users who have already installed ETC, passing through ETC lanes will not incur charges. ETC Deduction Principles: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with banks, the system achieves the purpose of vehicles not needing to stop at toll stations to pay fees. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, reducing wear and fuel consumption; Improved efficiency: Theoretically, ETC lanes can increase vehicle throughput efficiency by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also explicitly set the goal in the "13th Five-Year" comprehensive transportation development indicators that "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC usage rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. The integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation development directions will be explored to provide comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications.

4

3

Share

How to take out the jack of Yaris L?

How many kilometers can an Accord travel on a full tank of gas?

What is the fuel tank capacity of the Nissan Sylphy Classic?

How to Purchase Insurance for Motor Vehicles?

What brand is the original engine oil for Beijing Hyundai?

What is the difference of Tayron R-Line?

Is it possible not to install ETC?

Why was the Jetta VS7 discontinued?

What is the density of engine oil?

Will points be deducted for not wearing seat belts in the back seat on the highway?

What to Do When Your Driver's License Is Confiscated by the Police?