How to switch the instrument panel of Boyue Pro?

What engine does the Dongfeng Yixuan use?

Dongfeng Yixuan uses two engines independently developed by Dongfeng Fengshen, one is a 1.0-liter turbocharged engine, and the other is a 1.5-liter turbocharged engine. The Dongfeng Yixuan 1.0-liter turbocharged engine has 3 cylinders, with the model number DFMC10TDS, a maximum power of 92kw, and a maximum torque of 196nm. The 1.5-liter turbocharged engine has 4 cylinders, with the model number DFMA15T, a maximum power of 110kw, and a maximum torque of 230nm. For the daily maintenance of Dongfeng Yixuan's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the requirements specified by the manufacturer; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly based on usage conditions, and the oil level should be moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve, bringing dirt back to the lubrication area, accelerating engine wear and internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

4

2

Share

What are the advantages and disadvantages of rear-wheel drive vehicles?

Regarding the advantages and disadvantages of rear-wheel drive vehicles, the following points are outlined: 1. Excellent handling: With rear-wheel drive, the front wheels can focus solely on steering, making the vehicle more agile during turns. The balanced weight distribution between the front and rear enhances handling stability and ride smoothness, while also contributing to prolonged tire lifespan. 2. Faster acceleration and higher comfort: During vehicle start-up, acceleration, or hill climbing, the center of gravity shifts backward, increasing the traction of the rear wheels as the driving wheels. This facilitates better start-up, acceleration, and hill climbing, offering improved driving stability and comfort. 3. Simplified maintenance: The layout of the control mechanism and the structure of the steering system are simplified. Since the steering wheels are non-driven, the steering mechanism is straightforward and easy to maintain. 4. Higher power loss and fuel consumption: Power is transmitted to the driving wheels via the driveshaft, resulting in greater power loss compared to front-wheel drive vehicles. This directly manifests as higher fuel consumption than front-wheel drive vehicles. 5. Inefficient space utilization: The arrangement of the longitudinally mounted engine, transmission, and driveshaft reduces cabin space, affecting passenger comfort. Additionally, the central floor hump in the rear seats can impair the riding experience. 6. Prone to skidding and fishtailing: On snowy or slippery surfaces during start-up or acceleration, insufficient traction may lead to skidding. Braking under such conditions can also easily cause fishtailing.

10

1

Share

Which Audi models are domestically produced?

Audi has many models that are domestically produced, such as the Audi A3, Audi A4, Audi A6, Audi Q2, Audi Q3, Audi Q5, etc. The Audi A6L is a mid-to-large luxury sedan, and this model has relatively good sales in China. The competitors of the Audi A6L are the BMW 5 Series and the Mercedes-Benz E-Class. Below is relevant content introduction: 1. The Audi A6L is equipped with three engines in total, namely a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 3.0-liter turbocharged engine. 2. The low-power version engine has a maximum power of 140 kW, a maximum torque of 320 Nm, a maximum power speed of 4200 to 6000 rpm, and a maximum torque speed of 1450 to 4200 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. 3. The high-power version engine has a maximum power of 165 kW, a maximum torque of 350 Nm, a maximum power speed of 5000 to 6000 rpm, and a maximum torque speed of 1600 to 4500 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. 4. The 3.0-liter turbocharged engine has a maximum power of 250 kW, a maximum torque of 500 Nm, a maximum power speed of 5400 to 6400 rpm, and a maximum torque speed of 1370 to 4500 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block.

13

5

Share

What system does highway ETC refer to?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. Highways are equipped with one or multiple ETC lanes. ETC payment method: Through microwave-specific short-range communication between the RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane at the toll station, the system uses networked technology to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles passing through bridge and road toll stations without stopping to pay tolls. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID and vehicle registration certificate. The photocopy of the driver's license should include the page with the most recent annual inspection seal. Credit card application form, which will be used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS receipt to the designated service point to receive and install the ETC onboard device for free, with no additional charges. Applicants must be between 18 and 60 years old. The vehicle must be registered under the applicant's name. Here are the precautions for installing ETC: Do not obstruct the view. It is best to install it behind the rearview mirror: Many car models have a highly inclined windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or positions that might block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. Once the electronic tag is installed, the windshield will press the anti-tamper lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable, requiring a visit to an ETC service point for unlocking. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters to avoid automatic payment for the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to payment failure. When using a debit card bound to ETC, insufficient balance will also cause payment failure.

2

Share

Is Ethanol Gasoline Harmful to Cars?

Using ethanol gasoline has both disadvantages and advantages. More detailed information is as follows: 1. Disadvantages: Ethanol gasoline for cars has many shortcomings in terms of combustion value, power performance, and corrosion resistance: 1. The heat value of ethanol is 60% of that of conventional gasoline. According to relevant reports, if a car uses gasoline mixed with 10% ethanol without any modifications, the engine's fuel consumption will increase by 5%. 2. Ethanol has a high latent heat of vaporization, and its evaporation temperature under the theoretical air-fuel ratio is higher than that of conventional gasoline. This affects the formation of the air-fuel mixture and the combustion speed, leading to a decrease in the car's power performance, fuel economy, and cold-start performance, which is detrimental to the car's acceleration. 3. Ethanol produces acetic acid during combustion, which has a corrosive effect on car metals, especially copper. Relevant tests show that when the ethanol content in gasoline is between 0% and 10%, there is basically no corrosion to metals. However, when the ethanol content exceeds 15%, effective corrosion inhibitors must be added. 4. Ethanol is an excellent solvent and can cause slight corrosion, swelling, softening, or cracking to the car's sealing rubber and other synthetic non-metallic materials. 5. Ethanol is prone to absorbing water. When the water content in ethanol gasoline exceeds the standard, it is easy to undergo phase separation. 2. Advantages: 1. High octane number and good anti-knock performance. 2. The oxygen content of ethanol is as high as 34.7%. When gasoline contains 10% ethanol, the oxygen content can reach 35%. 3. The use of ethanol gasoline can effectively reduce car exhaust emissions and improve the energy structure. Domestic studies show that E15 ethanol gasoline (with 15% ethanol content in gasoline) reduces hydrocarbon emissions by 16.2% and carbon monoxide emissions by 30% compared to pure unleaded gasoline. 4. The production of fuel ethanol has abundant resources and mature technology. When the ethanol content in gasoline is less than 10%, ethanol gasoline can be used directly without major modifications to the existing car engine.

16

3

Share

How to Use Audi's Driver Assistance System?

Adaptive cruise control with stop & go function, which is an automatic following distance maintaining system. Within a speed range of 0 to 250 km/h, the system controls the vehicle speed and distance to the preceding vehicle by automatically accelerating or braking.

10

2

Share

How to switch the instrument panel of Boyue Pro?

What engine does the Dongfeng Yixuan use?

What are the advantages and disadvantages of rear-wheel drive vehicles?

Which Audi models are domestically produced?

What system does highway ETC refer to?

Is Ethanol Gasoline Harmful to Cars?

How to Use Audi's Driver Assistance System?

How many kilometers can a full tank of gas last for the Borgward BX5?

What kind of engine oil should be used for the 1.2L Toyota Corolla?

Which is More Fuel-Efficient, the Sagitar 230 or 280?

Is it okay to sleep in the car without opening windows or turning on the air conditioning?