How to Switch the BMW 3 Series Dashboard Between Chinese and English?

1 Answers
LaElla
07/30/25 4:35am
Open the driver's side door of the BMW 3 Series, and press the brake pedal to prepare for starting the engine. Press the one-touch start button of the BMW 3 Series, and all the dashboard lights will illuminate, indicating that the engine has started. Press the top of the toggle lever located on the right side of the steering wheel of the BMW 3 Series, and hold it for more than 3 seconds to switch back to Chinese.
Was this review help?
4
4
Share
More Forum Discussions

How Long Does It Take for Car Paint to Dry Before Driving?

Under standard painting procedures, car paint can be touched after 2 hours, and the paint surface will reach 80% hardness after 24 hours. It takes 36 to 72 hours for the paint to fully dry, but the car can generally be driven after about 24 hours. Automotive paint is quite complex, consisting of four layers from the inside out: the electrocoat layer, primer layer, base coat (color layer), and clear coat. If the car has just been painted, avoid exposing the newly painted areas to water and dust. It's advisable not to drive in rainy weather, as fresh paint is still delicate and may develop watermarks that cannot be removed even by polishing. Sunlight exposure is acceptable, but be cautious to prevent contact with chemicals and grease on the newly painted surfaces.
2
3
Share

How to Renew an Expired Vehicle License?

Vehicle license renewal process: 1. The renewal should be initiated three months in advance, i.e., within 90 days before the vehicle inspection is due; 2. For vehicles not exempt from inspection, the owner needs to bring the power of attorney, vehicle license, and compulsory traffic insurance policy to the local motor vehicle inspection station for inspection; 3. It is no longer necessary to apply for an inspection qualification mark. After passing the inspection, the vehicle license's auxiliary page will be directly endorsed. Note: The vehicle license itself does not have an expiration date. As long as the vehicle passes the inspection, it will continue to be endorsed as valid. Renewal essentially means getting the endorsement stamp. Although the vehicle license is long-term and does not expire, it still requires annual inspection and endorsement stamps. If the auxiliary page of the vehicle license is full of endorsement stamps, the owner must renew the license at the vehicle management office where the license plate was issued before the next annual inspection.
16
4
Share

What Are the Tips for Balancing an Electric Bike?

Keep the bike upright, gradually start the throttle, but ensure the bike has sufficient power to move. If the throttle is too low, the bike can easily wobble, making it difficult to maintain balance. When practicing turning, master the transition of the throttle and adjust the speed appropriately. In case of an emergency, pull the emergency brake handle. An electric bicycle refers to a personal transportation device that integrates mechanical and electrical components, based on a regular bicycle, equipped with a motor, controller, battery, throttle handle, brake handle, and display instrument system, using the battery as an auxiliary power source.
9
1
Share

How to Keep the Same License Plate When Changing Cars?

Method for keeping the same license plate when changing cars: Follow the process for canceling the registration of a motor vehicle to complete the scrapping and deregistration of the original vehicle. Within six months after the vehicle is scrapped and deregistered, submit an application to retain the license plate, along with the scrapping certificate of the original vehicle and the registration documents of the vehicle corresponding to the license plate, to the vehicle management office. The vehicle management office will review the documents. Eligible owners will have their applications accepted, the original license plate recorded, and a temporary license plate printed and issued to the vehicle owner. To apply for the use of the original motor vehicle license plate number, the following conditions must be met: 1. The application must be submitted within six months after the transfer or cancellation of registration; 2. The vehicle owner must have owned the original vehicle for more than three years; 3. All traffic violations and accidents involving the original vehicle must be resolved.
9
4
Share

How to Transfer ETC from Old Car to New Car?

The specific steps to transfer ETC from an old car to a new one: 1. Bring the vehicle license and ID card, fill out a change form. There is a button on the back of the ETC device—pressing it will pop it out, rendering the device inactive. 2. Re-match at the purchase location, go to the ETC customer service to update the data. If selling or changing cars, deregister first. 3. Bring the ETC card and OBU device to the ETC service center for removal. Use the removal receipt issued by the center to cancel the contract with the bank. 4. The old license plate must be under your name and used for at least three years. Complete the vehicle transfer and deregistration procedures for the old car, then register the new car with an external inspection. 5. Apply to use the original vehicle license plate and submit it to the processing officer. Note: The name and ID number on the new car invoice must match those of the old car.
8
0
Share

What are the requirements for upgrading from a C1 to an A2 driver's license?

A2 driver's license cannot be obtained directly through initial application; it can only be acquired through license upgrading. The conditions for upgrading are as follows: The applicant must hold a C license for more than three years without accumulating 12 penalty points in the previous two cycles, or hold an A3 or B2 license for more than one year without accumulating 12 penalty points in the previous cycle, to upgrade to a B1 license. After holding a B1 license for more than three years without accumulating 12 penalty points in the previous two cycles, or holding an A1 license for more than one year without accumulating 12 penalty points in the previous cycle, the applicant can upgrade to an A2 license. Physical requirements for upgrading to a B1 license: Age: Between 21 and 50 years old; Height: At least 150 cm; Vision: Uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart for both eyes; Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork; Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions; Lower limbs: Both lower limbs must be intact with normal movement functions, and the length difference should not exceed 5 cm. C1 driver's license: The C1 driver's license is a type of motor vehicle driver's license. It permits driving small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini special-purpose vehicles. Small passenger vehicles can carry up to 9 people. Age requirements for application: The minimum age for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 or older must pass tests on memory, judgment, and reaction abilities.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.