How to Switch Interfaces on the 2021 Excelle Dashboard?

How Often Should Volkswagen Full Synthetic Oil Be Changed

Volkswagen full synthetic oil typically needs to be changed every 10,000-12,000 kilometers or every six months. If the driving environment is dusty, temperatures are relatively low, or the vehicle is frequently used for short trips, it is recommended to shorten the oil change interval to ensure smooth engine operation. Method for changing oil in Volkswagen vehicles: Use a jack to lift the Volkswagen vehicle, locate and loosen the drain plug to drain the oil; unscrew the oil filter and place a container beneath it; replace with a new oil filter and add new oil. Meaning of oil viscosity grades: The "w" stands for winter, and the smaller the number before it, the better the oil's low-temperature fluidity, indicating a lower usable environmental temperature and better engine protection during cold starts. The number after "w" indicates the oil's high-temperature resistance, with higher values representing better protection under high temperatures. Classification of engine oils: Conventional mineral oil, semi-synthetic oil, and full synthetic oil. Mineral oil is a commonly used lubricant on the market, derived from useful substances during petroleum refining. Semi-synthetic oil uses a semi-synthetic base oil, which is a purified product of mineral oil through hydrocracking technology. Full synthetic oil is the highest-grade oil among engine oils.

15

4

Share

Does filling 95 gasoline with 92 have any impact on the car?

Filling 95 gasoline with 92 by mistake occasionally has little impact on the car, as long as it does not happen frequently. The difference between 95 and 92 gasoline: The biggest difference between 92 and 95 gasoline is the isooctane content. 92 gasoline contains 92% isooctane, while 95 gasoline contains 95%. The octane number of 95 gasoline is higher than that of 92 gasoline, and this octane number can improve the stability of the gasoline. Precautions for refueling: Do not overfill the tank. If the tank is overfilled, gasoline may overflow through the vent hole, which can lead to spontaneous combustion if exposed to an open flame, with unimaginable consequences; Try to avoid refueling only when the fuel light comes on. If you frequently wait until the fuel light comes on to refuel, the fuel pump will not receive proper lubrication and cooling, ultimately leading to a reduced lifespan of the fuel pump.

6

5

Share

What is the general temperature of an exhaust pipe?

Generally, at an exhaust pressure of 20kg, the exhaust temperature is around 90 degrees. Below is relevant information about exhaust pipe temperatures: 1. Depending on the vehicle model: The outlet temperature of the final exhaust pipe varies based on different vehicle models, the length of the exhaust pipe, and the number of mufflers. Typically, the exhaust pipe temperature of small family cars ranges between 30–120 degrees. Some modified cars can even have exhaust pipes that emit flames, with outlet temperatures reaching several hundred degrees. 2. Exhaust pipe length: The longer the exhaust pipe, the lower the outlet temperature at the tail end. Additionally, higher engine speeds result in higher exhaust temperatures. At idle, the outlet temperature is only around 30–50 degrees. 3. Engine temperature: The temperature from the engine to the exhaust manifold is 800–900 degrees. After passing through the front catalytic converter, it drops to 600–700 degrees. The temperature at the middle section of the muffler decreases to about 200–300 degrees, while at the tail section of the muffler, it is around 150 degrees. After cooling through the muffler baffle, the exhaust gas temperature is slightly above ambient, about 20–50 degrees.

1

2

Share

How to Install an ETC Device in a Car?

The installation process for a car ETC device is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. Where can the ETC be installed: For small vehicles like cars and minivans, the OBU device should be installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle part. ETC installation position requirements: The height should not be less than 1.2 meters or more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

3

1

Share

What grade of gasoline should be used for the m8?

The m8 should use 95-octane gasoline, as this fuel grade is recommended in the vehicle's official owner's manual. In addition to checking the appropriate gasoline grade in the owner's manual, you can also find it indicated on the fuel tank cap. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. For higher compression ratios, 98-octane gasoline is recommended. However, with the use of newer technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high-compression engines can also be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline grade for the m8 is not a problem as long as you switch back to the correct grade afterward. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-octane fuel, using higher-octane gasoline will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane fuel, using lower-octane gasoline can cause engine knocking. Because the octane rating is too low, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates serious engine issues. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, potentially leading to severe damage like cylinder scoring.

14

2

Share

Can I still renew my driver's license if it has expired?

Yes. According to relevant regulations, if your driver's license has expired for less than one year, you need to go to the vehicle management office to renew it. If the expiration period exceeds one year but is less than three years, the license is in a restorable cancellation status. You only need to retake the subject one exam at the vehicle management office, and upon passing, you can renew your license. Before renewing, please note: 1. Expiration date: Check your driver's license carefully to know the exact expiration date. 2. Traffic violations: Handle any traffic violation records promptly; otherwise, you will not pass the system review. 3. Regulations on unlicensed driving: Driving a motor vehicle on the road before receiving the new driver's license is considered unlicensed driving. 4. Validity period: New drivers receive a driver's license valid for six years. If the driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period, they can renew it for a ten-year validity period. If the driver has not accumulated 12 penalty points in any scoring cycle during the ten-year validity period, they can renew it for a long-term valid driver's license.

15

5

Share

How to Switch Interfaces on the 2021 Excelle Dashboard?

How Often Should Volkswagen Full Synthetic Oil Be Changed

Does filling 95 gasoline with 92 have any impact on the car?

What is the general temperature of an exhaust pipe?

How to Install an ETC Device in a Car?

What grade of gasoline should be used for the m8?

Can I still renew my driver's license if it has expired?

Which color of Camry holds its value best?

What level of vehicle is the Mercedes-Benz GLC?

How to Solve Fogging When Turning on the Air Conditioning?

What is the purpose of a spark plug?