How to Switch Driving Modes on the Changan CS55 Blue Whale Edition?

Is the Left Foot for the Accelerator or the Brake?

The left foot is not used for either the accelerator or the brake; both the brake and accelerator are controlled by the right foot, which is designed for safety. There is a designated resting place for the left foot in the driver's compartment, and it must never be placed on the pedals. The key reasons are as follows: 1. During long drives, both feet can become fatigued, leading to an unconscious tendency to press down. If the left foot is on the brake pedal at this time, it can easily cause an accident and pose a danger. 2. Since most people are right-handed, the right foot has a faster reaction time. In case of an emergency, the right foot can respond in the shortest possible time by lifting off the accelerator and pressing the brake pedal. If the left foot is on the brake pedal, the right foot would be in a suspended state when braking, making it easy for both feet to press down simultaneously, leading to danger.

7

2

Share

What is the original tire brand for Toyota Camry?

Toyota Camry's original tire brand is Dunlop. The tire maintenance methods are: 1. Install an automatic tire detection and evaluation system; 2. Regularly check tire pressure; 3. Check tread thickness; 4. Inspect tire wear level; 5. Check tire age. Functions of tires: 1. Bear the full vehicle weight; 2. Transmit traction force, braking force, driving torque, and braking torque; 3. Cushion and absorb impacts and vibrations caused by uneven road surfaces; 4. Improve wheel-to-ground adhesion performance; 5. Prevent severe vibrations and damage to vehicle components; 6. Adapt to high-speed performance and reduce driving noise; 7. Ensure driving safety, handling stability, comfort, and fuel economy.

11

0

Share

How deep can the Honda CR-V be submerged in water without issues?

The wading depth of the Honda CR-V is 30cm, and there should be no significant impact as long as the water level remains within this depth. Below are some precautions to take when driving through water: 1. Assess the water conditions: When wading through water on non-urban roads, the underwater conditions can be more unpredictable, so it's important to understand the water situation before proceeding. 2. Estimate the potential impact on the vehicle: Check whether the water level reaches the floor of the cabin or the exhaust pipe, and observe if the water exceeds the midpoint of the tires. If either of these two conditions is met, it could potentially cause serious damage to the vehicle's engine, computer components, and other parts.

11

3

Share

What transmission does the Compass use?

The Compass is equipped with a 6-speed manual transmission, a 7-speed dual-clutch transmission, and a 6-speed automatic transmission. The 2019 Compass comes in two models: two-wheel drive and four-wheel drive. The four-wheel-drive version features a front-engine, four-wheel-drive layout with an on-demand four-wheel-drive system and a multi-plate clutch center differential. The 2019 Compass measures 4415 mm in length, 1819 mm in width, and 1635 mm in height, with a wheelbase of 2636 mm. The vehicle's exterior design follows the brand's family design language, featuring a matrix-style front grille adorned with chrome-trimmed rectangles. The headlights on both sides are highly distinctive and aggressive, with a strong sense of styling and high recognizability.

4

1

Share

What Do Maximum Horsepower and Maximum Power Mean?

Maximum horsepower is a unit of maximum power, and maximum power is the rated power of the engine. Power is an important dynamic performance indicator of the engine, while horsepower is a unit of power. One horsepower is equal to the work done to lift a 75-kilogram object by 1 meter per second. Power is a crucial performance parameter of the engine. It measures how much work the engine can perform per unit of time. The greater the power, the more work the engine can do in the same time frame. Engines with higher power generally have stronger performance but also higher fuel consumption. The power of a car engine is directly proportional to its speed and torque. Torque, like power, is one of the primary indicators of a car engine, reflecting the vehicle's performance in terms of acceleration, climbing ability, and suspension.

16

5

Share

What does it mean when a vehicle's HC emissions exceed the standard?

When a vehicle's HC (Hydrocarbon) emissions exceed the standard, it indicates incomplete combustion of gasoline, poor atomization, or more seriously, issues with the oxygen sensor or the failure of the three-way catalytic converter in the emission system. Reasons for HC exceeding the standard: 1. Poor engine combustion: Many factors related to engine combustion can contribute, such as the cleanliness of the fuel, the atomization condition of the fuel injectors, fuel pressure, engine compression ratio, cylinder wall quenching effect, faults in the ignition system like spark plugs, ignition wires, and high-voltage coils, and cylinder wear leading to reduced cylinder pressure. 2. Decreased purification capability: Intake system faults can also cause HC to exceed the standard, such as overly rich air-fuel mixture; the fuel evaporation system and the crankcase ventilation system play a crucial role in HC levels.

19

0

Share

How to Switch Driving Modes on the Changan CS55 Blue Whale Edition?

Is the Left Foot for the Accelerator or the Brake?

What is the original tire brand for Toyota Camry?

How deep can the Honda CR-V be submerged in water without issues?

What transmission does the Compass use?

What Do Maximum Horsepower and Maximum Power Mean?

What does it mean when a vehicle's HC emissions exceed the standard?

What are the symptoms of a stretched timing chain?

Where is the auto start-stop switch for BMW Mini?

What to Do When the Dashboard Battery Light Turns Red?

Should the Car Battery Be Replaced When It Runs Out of Power?