How to switch between S and D gears?

1 Answers
ErinFitz
07/29/25 6:05pm
The method for switching between S and D gears: To shift from D gear to S gear, there is no need to stop or press the brake. You can directly shift into S gear while pressing the accelerator, which allows for faster power connection and more direct overtaking. Especially when shifting directly from D gear to L gear, it is suitable for rapid acceleration on uphill slopes, providing a complete burst of power. After overtaking, push into S gear sequentially to create distance from the following vehicle, then push back into D gear. D gear is the drive gear, while S gear is the sport gear, which means the engine shifts up later and downshifts earlier. In this mode, the vehicle's fuel economy is poor, but the power output is excellent. S gear allows the car to maintain high RPMs at lower gears for an extended period, resulting in greater torque output and acceleration. It is typically used for climbing slopes and quick overtaking.
Was this review help?
2
5
Share
More Forum Discussions

Is a Car Damaged by Hail Considered an Accident Vehicle?

A car damaged by hail is not considered an accident vehicle because the damage is not caused by a traffic accident. Here are the relevant details: 1. Key Points: Hail damage typically affects only the vehicle's body panels and does not impact its safety. Such damage can be repaired through bodywork and repainting, depending on the extent of the damage. However, the cost of repairs and the potential depreciation when selling the vehicle later should be taken into account. 2. Accident Vehicle: An accident vehicle refers to a car that has been damaged by non-natural wear and tear incidents, leading to a decline in mechanical performance and economic value. Generally, "accident vehicles" are those with structural damage. Additionally, flood-damaged cars and fire-damaged cars fall under the category of "special accident vehicles."
16
0
Share

What is the reason for the lack of power when starting the car with the air conditioning on and pressing the accelerator deeply?

Car starting with the air conditioning on and pressing the accelerator deeply lacks power. The reasons and solutions are as follows: 1. Vehicle protection for the transmission and engine: This is a protective mechanism for the transmission and engine, and many car models are like this. Because in a cold state, the lubricating oil has not fully lubricated all components, and if the speed is suddenly increased, the wear on the vehicle's transmission and engine will be more serious. Solution: Just wait for the car to warm up. 2. The car has a small displacement and is heavily loaded: For example, if you usually drive alone most of the time, and suddenly one day the car is full of five people, you will obviously feel the lack of power when starting. Solution: Clean the throttle valve and reduce the number of passengers.
2
4
Share

What to Do When Your Car Tire Goes Flat on the Road?

You can choose to call for roadside assistance or change it yourself. Below is an introduction to car tires: 1. Overview: Car tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help absorb shocks during driving, ensuring good ride comfort and smooth operation. They also maintain strong adhesion between the wheels and the road, improving traction, braking, and off-road capability. Additionally, they bear the weight of the vehicle, making their role increasingly important. 2. Usage Tips: (1) Avoid abrupt starts; whether the car is empty or loaded, always start smoothly at low speed to prevent tire drag and reduce tread wear. (2) On good roads, drive straight ahead. Avoid unnecessary swerving or sharp turns, except when overtaking or avoiding obstacles, to prevent lateral cutting damage between the tire and rim. (3) When descending long slopes, adjust speed appropriately based on gradient, length, and road conditions. On steep, long, or complex roads, use gear driving and mild braking to control downhill speed. This not only avoids emergency braking and reduces tire wear but also enhances driving safety.
7
1
Share

Why does the car window make noise when rolling up and down in the rain?

Here are the reasons for the abnormal noise when the car window is rolled up and down in the rain: 1. A large amount of dust accumulated in the rubber guide channel of the window: If there is abnormal noise when the window is rolled up and down, it is caused by a large amount of dust accumulated in the rubber guide channel of the window. Therefore, the resistance will increase during the rolling process, making it less smooth. 2. Aging of the window rubber can also cause the window to roll up and down unsmoothly: Applying lubricating oil can help. On one hand, it can lubricate, and on the other hand, it can maintain the flexibility of the rubber and reduce the occurrence of cracks. While solving the aging problem, it also plays a certain preventive role.
4
2
Share

What Happens If You Keep Driving Without Engine Oil?

Continuing to drive without engine oil will cause engine damage. Here are some relevant introductions about car engine maintenance: 1. Maintain good crankcase ventilation: Pollutants in the air can deposit around the PCV valve, potentially clogging it. If the PCV valve is clogged, contaminated gases will flow back into the air filter, polluting the filter element and reducing its filtration capacity. This leads to the intake of excessively dirty air-fuel mixture, further polluting the crankcase, resulting in increased fuel consumption, accelerated engine wear, and even engine damage. Therefore, it is necessary to regularly maintain the PCV valve and remove pollutants around it. 2. Regularly change engine oil and oil filter: When engine oil passes through the fine holes of the oil filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged, the oil cannot flow smoothly through the filter, which may cause the filter to burst or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas. This accelerates engine wear and increases internal contamination.
16
5
Share

How Many Days Does It Take for Subject 3 Appointment to Be Successfully Accepted?

Generally, the review time for a Subject 3 appointment takes 5-10 days. If you are in a first-tier city where there are many applicants, the time may be extended, and notification will be given at the latest 3-5 days before the exam.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.