How to switch between D gear and S gear on the Lavida?

Which express delivery does the DMV use to send license plates?

Postal Express EMS is the designated express delivery for the DMV to send license plates. It usually takes 3-4 days for the license plates to be delivered. The delivery speed is slightly slower, but generally, from the time the license plates are sent out to the time the owner receives them, it will not exceed one week at the latest. Below are the detailed explanations: 11183 telephone inquiry; 11183 is the phone number for China Postal EMS. After dialing, transfer to the customer service representative, provide the license plate number to the staff, and you can inquire about the logistics progress of the license plate. It usually takes 3-4 days for the license plates to be delivered. The license plate delivery service is provided by Postal Express EMS, and the delivery speed is slightly slower. Generally, from the time the license plates are sent out to the time the owner receives them, it will not exceed one week at the latest. Traffic Management 12123 app inquiry; Register and log in to the app. For Apple mobile systems with iOS 15 or above, using the Traffic Management 12123 app (V2.8.1B437), you can check the progress of the license plate in the online processing progress section. Once the license plate is made and sent out, you can also check the logistics. If your mobile phone number is bound, you will receive an SMS notification when the license plate is sent out. Postal APP inquiry; For Apple mobile systems with iOS 15 or above, download the Postal APP (V3.5.5). This is the official APP of China Post. Open the APP, and at the top, there is a mail progress search bar. Click to enter the inquiry page. On the page, select the motor vehicle license plate, enter the license plate number or acceptance number, and you can inquire. The Traffic Management 12123 app is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, supported by the Traffic Management Science Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for vehicle owners and drivers, including personal user registration for the internet service platform, appointment, acceptance, and processing of motor vehicle and driver's license-related services, traffic safety information inquiries, service reminders, service guidance, and road traffic services. The DMV, short for Vehicle Management Office, is primarily responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation. The DMV processes applications for motor vehicle driver's licenses, replacements, renewals, verifications, and other related services for motor vehicles and drivers. Issues such as improperly filled forms or failure to sign and stamp as required should be reported to the supervision department.

10

0

Share

What is the appropriate tire pressure for the Magotan?

The standard tire pressure for the Magotan is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure monitoring system in the Volkswagen New Magotan can display the tire pressure on the combination instrument panel. To access this, navigate to the vehicle status menu in the combination instrument panel. While driving, the direct tire monitoring system uses tire pressure sensors on the wheels to monitor the pressure of all four tires. If a loss of pressure is detected, the system will display a visual alert or sound an alarm. Generally, a tire pressure above 2.8 bar is considered too high, and below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. This can lead to a blowout during high-speed driving. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Usually triggers an alarm if below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to stay on. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. In this case, the only solution is to replace the sensor with a new one.

1

3

Share

What are the 16 items in the A3 license Category 2 test?

Hill start and stop, parallel parking, driving on undulating roads, passing continuous obstacles, crossing single-plank bridge, curve driving, right-angle turn, passing width-restricted gate, pole test, narrow road U-turn, simulated highway driving, simulated emergency handling, continuous sharp turns on mountain roads, simulated emergency handling, simulated tunnel driving, and driving in rainy/foggy conditions. These are the items for the A3 license Category 2 test. Below are detailed descriptions: Pole test: Reverse into Garage B from the starting point and stop properly, then move the vehicle into Garage A with two forward and two backward movements and stop properly. Then drive forward out of Garage B to the control line, reverse into Garage A and stop properly, then return to the starting point. The vehicle must not stop during the process, and the total time must not exceed 8 minutes. Parallel parking: After stopping the vehicle on the right side in front of the parking space, reverse into the space in one go without stopping. The wheels must not touch or cross the lane boundary lines or parking space boundary lines. Crossing single-plank bridge: During the test, the vehicle must not stop, and the wheels must not fall off the bridge. Narrow road U-turn: Drive the vehicle to the U-turn section and stop on the right side. Complete the U-turn with no more than three forward and two backward movements. The test time must not exceed 5 minutes. Passing continuous obstacles: The vehicle must use gear 2 or above and pass over the circular obstacles without touching, scraping, or running over them. The vehicle must not cross or run over the road edge lines on either side and must not stop during the process. Curve driving: Commonly known as the S-curve. The test requires the vehicle to drive on an S-shaped road of specified width without pressing against the road edge lines, with smooth steering control. This tests the driver's ability to maneuver the vehicle through curves and control its trajectory, aiming to develop skills in steering and wheel path control. Right-angle turn: Drive the vehicle along the specified route and make a right-angle turn from left to right or right to left in one go without stopping. The wheels must not touch or cross the lane boundary lines. Hill start and stop: Control the vehicle to stop accurately and start smoothly without rolling back. The starting time must not exceed 30 seconds. Simulated highway driving: After driving to the entrance ramp, turn on the left turn signal, look back to observe traffic on the left, and after confirming safety, accelerate into the driving lane and maintain the minimum speed limit before turning off the turn signal. When changing lanes, turn on the turn signal for the intended lane, observe traffic, and change lanes after confirming safety. When exiting the highway, adjust speed and lane in advance according to exit signs. Simulated emergency handling: During normal driving, one of the following emergency situations will be randomly selected and simulated via voice or lights: If an obstacle suddenly appears ahead, brake immediately and stop quickly, then turn on the hazard warning lights after stopping. In case of a tire blowout or other vehicle malfunction on the highway, slow down appropriately, observe following traffic, stop the vehicle smoothly in the emergency lane, turn on the hazard warning lights, prompt passengers to move outside the guardrail, place warning signs correctly, and the driver should move outside the guardrail and simulate calling for help. Simulated tunnel driving: Observe the road signs near the tunnel before driving in and follow the instructions. Slow down when approaching the tunnel, turn on the headlights, and sound the horn. Sound the horn again when exiting the tunnel and turn off the headlights. Do not sound the horn in no-honking zones. Simulated rainy/foggy driving: Drive at reduced speed. In rainy conditions, adjust the wiper speed according to rainfall. In foggy conditions, turn on the fog lights, position lights, headlights, and hazard warning lights. Simulated slippery road driving: Slow down before entering the slippery road, then use low gear to drive steadily through while maintaining smooth steering control. Simulated continuous sharp turns on mountain roads: Slow down before entering the curve, drive on the right side, sound the horn before entering the curve, and do not occupy the opposite lane while driving. Driving on undulating roads: Slow down before entering the undulating road and pass through slowly without stopping. Passing width-restricted gate: Drive through the three gates at a speed of no less than 10 km/h without touching the hanging poles.

5

2

Share

Is the Jetta VS5 a joint venture?

Jetta VS5 is a joint venture product. The Jetta brand still belongs to the Volkswagen Group and is a brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. The Jetta VS5 is positioned as a compact SUV, with body dimensions of 4419mm in length, 1841mm in width, and 1616mm in height, and a wheelbase of 2630mm. The Jetta VS5 is equipped with a 1.4T engine, model EA211DJS, with a displacement of 1395ml, featuring 4 cylinders arranged in an L configuration, turbocharged intake, 4 valves per cylinder, and a DOHC valve train.

5

0

Share

Why does the car make a rattling noise when accelerating?

The rattling noise when accelerating is caused by resonance from the underbody shield beneath the engine. Simply tightening the shield can resolve this issue. Another possible cause is a broken catalytic converter. The underbody shield in a car serves to dampen vibrations, as both the engine and wheels are mounted on it. Vibrations at certain frequencies can resonate with the chassis, and installing an underbody shield helps eliminate such noise. When driving on highways, the friction noise between the wheels and the road is proportional to the car's speed. Adequate underbody protection can effectively reduce the noise generated during driving.

18

3

Share

How to adjust the display time of Jetta VS5?

Jetta VS5 display time can be adjusted through the car's built-in central control display. The Jetta VS5 adopts Volkswagen's family-style design, with the dashboard of the interior leaning towards the driver's side, making it convenient for the driver to operate while driving. The Jetta VS5 features a brand-new design concept, with the front grille adopting a scale-like design, combined with its unique car logo, giving the front of the car a very youthful appearance. The lower bumper of the front face uses a through-type design, with an overall shape that is quite grand. The Jetta VS5 is equipped with a 1.4T turbocharged engine, with a maximum power of 150 horsepower and a maximum torque of 250 Nm.

14

3

Share

How to switch between D gear and S gear on the Lavida?

Which express delivery does the DMV use to send license plates?

What is the appropriate tire pressure for the Magotan?

What are the 16 items in the A3 license Category 2 test?

Is the Jetta VS5 a joint venture?

Why does the car make a rattling noise when accelerating?

How to adjust the display time of Jetta VS5?

Which BYD models are hybrid?

What are the advantages of Audi cars?

Is the Ora Good Cat a Domestic Vehicle?

Can 92 and 95 gasoline be mixed for Lavida?