How to Switch Between B and D in the Leiling Hybrid?

How to Turn on the Highlander Air Conditioner?

Below are the methods to turn on the Highlander air conditioner: The Highlander air conditioner controls can be divided into front manual air conditioning control and front automatic air conditioning control. Pressing the A/C button turns on the Toyota Highlander air conditioning system, and the indicator light on the button illuminates. Pressing this button again turns off the indicator light and shuts down the compressor. Additional details: 1. Rotate the 1 knob clockwise or counterclockwise to raise or lower the temperature. To adjust the temperature for the driver's seat, front passenger seat, and rear seats separately: Press "SYNC" (the "SYNC" display disappears) and rotate the front passenger side 2 knob. (The "PASSSYNC" display switches to "PASS") Press the "up" or "down" side of "REARSYNC". Each time "SYNC" is pressed, the air conditioning system switches between independent mode and sync mode. 2. Fan speed setting: To adjust the fan speed, press "up" on the speed setting to increase the fan speed, press "down" to decrease the fan speed, or press OFF to turn off the fan. 3. Switching airflow mode: Press the air vent setting to switch the airflow mode. Each time this button is pressed, the air vent in use switches.

4

0

Share

How to Open the Bonnet of the Boyue?

Method to open the bonnet of the Geely Boyue: Pull the bonnet release handle located at the lower left side of the driver's side dashboard inside the car, marked with this symbol, to open it. Here is some relevant information: 1. The bonnet switch of the Geely Boyue is located in the control area on the left side of the steering wheel, where there is an unlock button. Just press it lightly, and the bonnet will slightly pop up with a "click" sound to unlock. However, pressing the bonnet unlock button inside the car does not fully open it. There is another latch located under the bonnet, in the middle of the front cover. Only after releasing this latch can the bonnet be fully opened. 2. Closing the bonnet of the Boyue is also very simple. Pull down the bonnet, place both hands on the front edge of the bonnet, corresponding to the positions of the headlights on both sides, and press down gently. There is no need to use excessive force. When you hear a "click" sound, it means the bonnet is securely closed. Avoid pressing too hard on the central part of the bonnet, and it is best not to slam it shut, as the bonnet is made of aluminum alloy and excessive force may cause dents.

5

2

Share

How to Solve the RPM Sensor Signal Fault Issue?

If the resistance exceeds the specified range, it indicates that the sensor is damaged and the RPM sensor should be replaced. Further inspection should be conducted to check whether there is a short circuit to ground in the wiring between the sensor and the engine control unit, and any identified issues should be repaired promptly.

12

5

Share

How to Remove Sunscreen Stains from Car Leather?

You can use makeup remover to clean sunscreen stains from car leather. Makeup remover is specifically designed to remove skincare products and cosmetic residues, offering strong cleaning capabilities. Pour the makeup remover onto a cotton pad and gently apply it to the areas with sunscreen stains. Then, use a clean tissue to wipe the area lightly, and the sunscreen stains on the car leather will be completely removed.

18

1

Share

How to Use the AUTOHOLD Function in a Car?

First, fasten the seatbelt in the driver's seat. When the "AUTO-HOLD" button is pressed, the corresponding automatic parking function will be activated. At a red light, you can relax your right foot without stepping on the brake, as the "AUTO-HOLD" function will keep the car stationary.

16

0

Share

How to Upgrade and Update Car Navigation System?

If the car navigation system is factory-installed, it can only be upgraded at a 4S dealership. If the navigation system is aftermarket-installed, you can download updates from the official website of the navigation brand via the SD card on the navigation host. If you are using an Android-based car infotainment system, you can directly upgrade the car navigation version through the operation interface.

1

5

Share

How to Switch Between B and D in the Leiling Hybrid?

How to Turn on the Highlander Air Conditioner?

How to Open the Bonnet of the Boyue?

How to Solve the RPM Sensor Signal Fault Issue?

How to Remove Sunscreen Stains from Car Leather?

How to Use the AUTOHOLD Function in a Car?

How to Upgrade and Update Car Navigation System?

How to Solve the Vibration Issue of Buick Excelle?

What engine does the Zotye 5008 have?

What to Do When the Cadillac XT5 Displays 'Transmission Service Required'?

What do the F and E on the Leiling fuel gauge represent?