···
Log in / Register

How to Study for A2 Driver's License Points Deduction on 12123?

4 Answers
LeAlexandra
09/09/25 2:20am

First, download the Traffic Management 12123 app, then register and log in. Click on 'More' on the main interface. Next, find 'Online Learning for Review Education' under 'Education and Learning Services' and click to enter. Then, select the city where your driver's license was issued. After reading the 'Service Instructions', click 'Read and Agree', then click 'Next'. On the 'Review Education Application' page, you can see the information of your driver's license. After confirming it is correct, click 'Submit Application'. On the online learning page for review education, click 'Course Learning'. You need to accumulate 3 hours of study within 3 consecutive days to pass the review and complete the learning.

Was this review help?
14
0
Share
DiAnastasia
09/20/25 7:16am

A while ago, my own A2 driver's license also had points deducted, and it was quite convenient to handle on the Traffic Management 12123 app. After logging into the account, I found the 'Driver's License Services' or 'Violation Processing' entry from the main interface, which includes options like 'Full Score Education' or 'Study to Remove Points.' According to regulations after points deduction, it's necessary to complete online traffic safety education, which involves watching short videos and taking quizzes covering common traffic rules and accident prevention techniques. The study duration is usually about an hour. After passing, the system automatically removes the points, and it also helps improve our awareness of safe driving. Don’t forget to set reminders to avoid overdue processing, which could lead to a temporary suspension of the license. The whole process can be done on the phone without any legwork, saving time and hassle, while also reviewing key traffic rules.

Was this review help?
7
5
Share
Expand All
StLyla
11/03/25 7:40am

I've been driving for nearly twenty years, holding an A2 license, and have used the Traffic Management 12123 app multiple times for point deduction. On the app's homepage, go to 'Driver's License Services' and select the 'Education and Learning' section. After receiving points, you must complete online courses within the deadline by watching educational videos and answering multiple-choice questions. Passing these will clear your points. Remember to focus on the content sincerely—it's not just about removing points but also about fostering good driving habits. A2 license holders bear significant responsibility; exceeding 6 points requires extra caution. The app's process is straightforward and efficient, allowing you to handle everything in one login and even download transcripts for future reference. Address issues promptly to avoid accumulation—safety always comes first.

Was this review help?
9
4
Share
Expand All
ONevaeh
12/17/25 7:40am

As a driver, I smoothly handled the A2 license point deduction through the Traffic Management 12123 app. After logging in, I accessed the driver's license section, found the education center, and completed the learning tasks such as videos and exams as prompted. Post-deduction learning is a crucial step—passing can eliminate some points, avoiding full point deduction and the need to retake the test. The app's interface is intuitive, allowing me to start the course in just a few minutes, which helped me review traffic regulations and reinforce safe driving concepts.

Was this review help?
11
2
Share
Expand All
More Forum Discussions

What is the fuel consumption for one hour of idling in place?

Idling in place for one hour consumes approximately 0.6 liters of fuel. Below is an introduction to idling: Introduction: Idling is an operating condition of a car, referring to the engine running in neutral gear. Diagnosis of unstable idling: Uneven fuel injection from the injectors or poor atomization can cause an imbalance in the power output of each cylinder. If the oil pressure is too low, the fuel sprayed from the injector may have poor atomization or form a line, and in severe cases, only droplets may be sprayed, reducing the fuel injection and making the mixture too lean. If the oil pressure is too high, the actual fuel injection increases, making the mixture too rich. Faults in sensors or wiring can lead to incorrect commands from the control unit, resulting in improper fuel injection, causing the mixture to be too rich or too lean, which are indirect causes of unstable idling.
2
5
Share

What is the fuel consumption of the Peugeot 3008 1.6t?

8.0L/100km. Here are the detailed specifications of the Peugeot 3008: 1. Overview: The Peugeot 3008 is a stylish mid-size crossover SUV, launched in January 2009 and entered the Chinese market in December 2010. The Peugeot 3008 has both domestic and imported versions. The imported version for the Chinese market is divided into Fashion and Luxury models. 2. Others: The wheelbase is 2613mm. The vehicle dimensions are 4428mm×1840mm×1652mm. The trunk capacity is 503L/512-1604L. The fuel consumption ranges from 6.4 to 8.8L/100km. The fuel tank capacity is 60L. The engine types are 1.6T-L4 or 2.0L-L4. The top speed is 204km/h. The acceleration time is 10 seconds for 0-100km/h. The drive type is front-wheel drive.
14
0
Share

What are the dimensions of a double-axle vehicle?

The specific dimensions of double-axle vehicles vary depending on the model. Here is an introduction about double-axle vehicles: Introduction: Rear eight-wheeler: Also known as a rear eight-wheeler dump truck or double-axle vehicle. It refers to a vehicle that unloads cargo by hydraulic or mechanical lifting. Also known as a tipper truck. It consists of components such as the vehicle chassis, hydraulic lifting mechanism, cargo compartment, and power take-off device. Working principle: The engine, chassis, and cab structure of a dump truck are the same as those of a general cargo truck. The cargo compartment of a dump truck can tilt backward or sideways, controlled by a piston rod movement system. Backward tilting is more common, where the piston rod pushes to tilt the compartment, while a few models allow bidirectional tilting. High-pressure oil enters the lifting hydraulic cylinder through the distribution valve and oil pipe, with the front end of the compartment featuring a 58 Automobile cab safety guard plate.
14
0
Share

What is the reason for the ABS light and the skid light coming on simultaneously?

When the ABS and skid lights of a car come on simultaneously, it indicates a malfunction in the vehicle's anti-skid system. Relevant explanations are as follows: 1. When the ABS malfunctions: It is advisable not to continue driving. Alternatively, rely on the conventional braking system to proceed to an auto repair shop as soon as possible. During the journey, drive cautiously, slowly, and steadily, avoiding aggressive driving. A malfunction in the anti-lock braking system can also affect the ESP anti-skid system. A fault in the anti-skid system may cause the vehicle to skid during emergency braking or sharp turns, which is extremely dangerous. 2. Solution: If the car's anti-skid system is malfunctioning, it is necessary to promptly visit the car's 4S store or a repair shop to inspect and repair the anti-skid system. This will resolve the issue of the ABS and skid lights coming on simultaneously.
2
0
Share

Is it illegal if the letters on the back of the car fall off?

It is not illegal if the letters on the back of the car fall off, as long as the car logo remains untouched. Below is relevant information about vehicle inspection: 1. Regulations: New cars do not require on-site inspection within the first 6 years, and you can directly obtain the inspection compliance mark. However, after 6 years (including 6 years), an annual inspection is required, and the car must be driven to the inspection site. 2. Notes: For non-commercial passenger cars and other small and mini passenger vehicles (excluding vans and vehicles with 7 or more seats) registered within 6 years, a biennial periodic inspection is required. The vehicle owner can directly apply to the traffic management department of the public security authority for the inspection mark by providing proof of compulsory traffic accident liability insurance and tax payment or exemption proof for vehicle and vessel tax, without the need for a safety technical inspection at an inspection institution. Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle.
6
2
Share

What is the first-cut oil?

First-cut oil refers to the oil produced by the crude oil vacuum distillation tower. The introduction of first-cut oil is as follows: 1. Introduction to first-cut oil: It is mainly divided into first-cut to fourth-cut according to different boiling points, with the boiling point increasing progressively. Among them, first-cut oil is the basic raw material for producing lubricating oil, and the first-cut oil is of better quality and can also be used for blending diesel. Compared with ordinary base oil, first-cut oil is a non-standard oil. Through processes such as solvent deasphalting, solvent dewaxing, solvent refining, hydrofining or acid-base refining, and clay refining, substances that form free carbon, low viscosity index substances, substances with poor oxidation stability, paraffin, and chemical substances that affect the color of finished oil are removed or reduced to obtain qualified lubricating base oil. 2. The main indicators of first-cut oil: density, freezing point, color, viscosity, flash point, etc.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.