How to Straighten a Crooked Motorcycle Handlebar?

What Causes Car Headlights to Flicker?

Car headlights flickering may be caused by poor contact or abnormal bulb quality. Headlights: The main purpose of headlights is to illuminate the road and objects ahead of the vehicle, ensuring driving safety. The high and low beams can be alternately switched as a signal for overtaking at night. Headlights are installed on both sides of the front of the car, with each vehicle equipped with 2 or 4 units. The bulb power is 45-60W for high beams and 25-55W for low beams. Fog Lights: Fog lights are installed near the headlights or slightly lower than the headlights. In conditions of low visibility such as fog, snow, heavy rain, or dust, fog lights serve to illuminate the road and provide signals to oncoming vehicles. The light is mostly yellow, as yellow light has longer wavelengths and good fog-penetrating performance. The bulb power is generally 35W.

8

4

Share

How many production bases does FAW have?

FAW-Volkswagen has five major production bases, namely the Northeast Base in Changchun, the North China Base in Tianjin, the East China Base in Qingdao, the Southwest Base in Chengdu, and the South China Base in Foshan. Introduction to FAW-Volkswagen: FAW-Volkswagen Automobile Co., Ltd. was established in February 1991. It is a large passenger vehicle manufacturer jointly operated by China FAW Group Corporation, Volkswagen AG, Audi AG, and Volkswagen (China) Investment Co., Ltd. Automotive products under FAW-Volkswagen: The product lineup includes Audi e-tron, Audi A6L, Audi Q5L, Audi A4L, Audi Q3, Audi A3 Limousine, Audi A3 Sportback, Audi Q2L, Magotan GTE, CC, Tayron, T-ROC, Tacqua, all-new Sagitar, Golf, etc.

12

4

Share

What Issues Should Be Noted When Buying a Used Car?

When buying a used car, pay attention to the following specific issues: 1. Performance: Be mindful of the car's performance to avoid purchasing a vehicle with poor performance. When selecting a used car, tap the body and listen for any abnormal sounds, start the car, and listen for any irregularities in the engine noise. 2. Chassis: Pay attention to the chassis and frame; do not purchase if any deformation is detected. After an accident, even if the car's exterior is well-repaired, its frame and chassis are often difficult to restore. This car might be a salvage vehicle. 3. Exterior: When buying a car, observe the exterior carefully, checking all corners and parts for signs of repainting. Some used cars have been in accidents. To increase their value, dealers may refurbish and repaint them to make them look better. Therefore, check for wear on the tires, headlights, and bumpers.

1

0

Share

Is consuming 1 liter of oil every 2,500 kilometers considered high oil consumption?

Consuming 1 liter of oil every 2,500 kilometers is considered high oil consumption. Overview of vehicle fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator for vehicles. The fuel consumption per 100 kilometers is measured by manufacturers under objective conditions using a dynamometer installed on the vehicle's chassis, which converts the values into speed parameters. The vehicle is then driven at specified speeds to calculate the theoretical experimental fuel consumption data per 100 kilometers for the model. Magnitude of vehicle fuel consumption per 100 kilometers: Since most vehicles approach their most economical speed at around 90 km/h, the officially published theoretical fuel consumption is usually the fuel consumption per 100 kilometers at 90 km/h.

16

1

Share

What is the function of the rearview mirror?

The rearview mirror, also known as the side mirror, serves the following purposes: 1. For the convenience of the driver's operation, to prevent traffic safety accidents and ensure personal safety, rearview mirrors must be installed in cars, and all rearview mirrors must be adjustable in direction. The driver can directly obtain external information about the rear, side, and lower parts of the car while seated in the driver's seat. 2. The rearview mirror has a field of view issue, which refers to the range that the mirror surface can reflect. The industry has proposed three elements of the field of view: the distance between the driver's eyes and the rearview mirror, the size of the rearview mirror, and the radius of curvature of the rearview mirror. 3. When the distance and size of the rearview mirror are the same, the smaller the radius of curvature of the mirror surface, the larger the field of view reflected by the mirror. When the radius of curvature of the mirror surface is the same, the larger the size of the mirror surface, the larger the field of view reflected by the mirror. Classification by installation location: 1. Interior rearview mirror: The interior rearview mirror is a mirror that allows the driver to confirm the rear situation without significantly changing the forward line of sight while driving. 2. Exterior rearview mirror: Passenger cars generally install the exterior rearview mirror on the door. In Japan, it is also installed on the fender. 3. Under-mirror: The under-mirror allows the driver to see areas outside the front and rear wheels under the car body in the mirror directly in front of the driver's seat. It enables the driver to see whether there are people or obstacles near the front and rear wheels and the side of the car when reversing or starting forward, to avoid injuring people, damaging objects, or the vehicle.

3

2

Share

What brand is SHIMO tire?

"SHIMO" tires are products manufactured by Shandong YongSheng Rubber Group Co., Ltd. Shandong YongSheng Rubber Group Co., Ltd. is located in the Rubber Industrial Park of Dawang Town, Guangrao County, the hometown of Sun Wu, a renowned Chinese historical figure. Established in 1986, the company integrates development, production, and sales, with its main products being the "Yongsheng," "Qichuang," and "Bowei" series of radial tires. Tire wear indicators can reflect tire condition: Regardless of the tire brand, wear indicator marks are set in the tread grooves. When the tread depth is worn down to the same level as the raised indicator rubber, it indicates that the tire needs to be replaced. Tires should be replaced promptly when bulging occurs: Tread bulging indicates localized rubber deterioration or uneven pressure. At this point, the tire may explode at any time, making continued driving extremely dangerous, so it should be replaced immediately.

4

5

Share

How to Straighten a Crooked Motorcycle Handlebar?

What Causes Car Headlights to Flicker?

How many production bases does FAW have?

What Issues Should Be Noted When Buying a Used Car?

Is consuming 1 liter of oil every 2,500 kilometers considered high oil consumption?

What is the function of the rearview mirror?

What brand is SHIMO tire?

What are the consequences of sharing the VIN with others?

Is SUV Reverse Parking Different from Sedan?

What is the difference between body over the line and wheel over the line?

What is the weight of a standard helmet?