How to Straighten a Bent Key?

What Vehicles Can a Class D License Drive?

D class license permits driving three-wheeled motorcycles. A Class D driver's license is also compatible with vehicles allowed by Class E and F licenses. Class E license permits driving ordinary two-wheeled motorcycles, while Class F license permits driving light motorcycles, i.e., motorcycles with an engine displacement greater than 50cc or a maximum speed exceeding 50km/h. The Class D license examination consists of three subjects: Subject One, Subject Two, and Subject Three. Below is an introduction to the subjects of the Class D license examination: Subject One: Theoretical knowledge test, similar in content to the Class C1 license examination. Subject Two: Slalom test, with a full score of 100 points; 80 points or above is considered passing. Touching a pole deducts 10 points, knocking over a pole deducts 20 points, and any wheel crossing the edge line of the pole track results in failure. Subject Three: Conducted together with Subject Two, without separate training or examination. It includes five items: turning, width-limited gate, slope parking, slope starting, and single-plank bridge. According to the "Motor Vehicle Driver's License Business Work Standards" issued by the public security department, motor vehicle driver's licenses are classified into levels. Therefore, driver's licenses are divided into 15 levels: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, P. The vehicle types permitted by each different level of driver's license are as follows: A1 license permits driving large passenger vehicles. A2 license permits driving tractor trailers, heavy and medium-duty full trailers, and semi-trailer combinations. A3 license permits driving city buses with a capacity of 10 or more passengers. B1 license permits driving heavy passenger vehicles. B2 license permits driving heavy and medium-duty cargo vehicles, etc. C1 license permits driving small and mini passenger vehicles, etc. C2 license permits driving small and mini automatic transmission passenger vehicles, etc. C3 license permits driving low-speed cargo vehicles (originally four-wheel agricultural transport vehicles). C4 license permits driving three-wheeled vehicles (originally three-wheel agricultural transport vehicles). M license permits driving wheeled self-propelled machinery vehicles. N license permits driving trolleybuses. P license permits driving tramcars.

14

2

Share

Which ring roads in Beijing are off-limits to out-of-town vehicles?

Out-of-town vehicles are not allowed to enter the Sixth Ring Road of Beijing, as per the traffic management measures implemented from April 11th. The restrictions on non-local passenger vehicles remain unchanged, meaning that from 7:00 to 9:00 and 17:00 to 20:00 on weekdays, passenger vehicles from other provinces, autonomous regions, and municipalities are prohibited from entering roads within the Fifth Ring Road (including the Fifth Ring Road itself). For passenger vehicles entering Beijing from other provinces, autonomous regions, and municipalities, traffic management measures are enforced from 9:00 to 17:00 on weekdays, restricting vehicles based on the last digit of their license plates during peak hours. The restricted area includes roads within the Fifth Ring Road (including the Fifth Ring Road itself), and the rotation of restricted license plate digits follows the same rules as those for Beijing-registered vehicles.

10

5

Share

Is an Idle Speed of 1000 RPM Normal for a Car?

An idle speed of 1000 RPM is not normal for a car. An idle speed of 1000 RPM is too high; the typical idle speed usually ranges between 700 and 900 RPM. Idle state refers to a working condition of the engine when it is running without load. When the engine is running, if the accelerator pedal is completely released, the engine enters the idle state. When adjusting the idle speed, the RPM should not fluctuate abruptly, as this can cause premature wear to the engine. It is best to have the idle speed adjusted by an automotive repair service. Idle speed refers to the engine running without any load, only overcoming the internal friction resistance of its components, without delivering any external power. The minimum RPM required to maintain stable engine operation is called the idle speed, which is one of the five basic operating conditions of an engine. For an engine with good performance, the idle speed is generally between 550-800 RPM. Solutions for high idle speed in cars: When the engine idle speed is too high, first start the engine, then manually control the throttle arm to close the throttle. If the idle speed returns to normal, it indicates that the throttle return spring is too weak and should be replaced. If manually closing the throttle is ineffective, check whether the throttle shaft is loose or if the throttle is closing properly. If the throttle does not close tightly or the throttle shaft is loose, it should be repaired. If the throttle is functioning normally, check for minor air leaks below the throttle. If leaks are found, they should be eliminated. If no leaks are found, further adjust the idle speed until it reaches the appropriate level.

6

0

Share

What Does Car Glazing Mean?

Car glazing refers to a process where, after multiple treatment steps, a protective coating similar to the outer layer of ceramic products like 'Tang Tri-Color' pottery is formed on the car's paint surface. This coating provides functions such as UV protection, oxidation resistance, and defense against high temperatures and acid rain. After car glazing, the effects of enhancing glossiness and hardness can be achieved. The role of glazing: The actual car glazing beauty process is quite complex, taking 3 to 4 hours. The glazing process: First, use decontamination clay made from volcanic ash to carefully wipe the paint surface, removing dust and oil stains. Then, use an electrostatic wheel with a brightener to remove impurities attached to the car's paint surface and the oxidized layer, smoothing and filling in fine scratches. At the same time, the chemical agent penetrates the car paint, causing a restorative change to achieve a bright and new effect.

11

0

Share

How to Find 30 Centimeters While Sitting in a Car?

Align the right side of the car hood's center by 15 centimeters with the right edge line to ensure a 30-centimeter distance. From the driver's perspective, aim the right one-third of the front hood at the roadside line and park. Alternatively, observe a fist-width position to the right of the hood center, align with the edge line, then straighten the wheels and park. Parking is similar to a right lane change—don't rush to pull over immediately. Shift to first gear and make gradual adjustments, fine-tuning multiple times until reaching 30 centimeters. Methods to Determine the Car's Position: Using the driver as a reference, the left leg's position indicates the left front wheel's trajectory, while the right leg aligns with the car's centerline. Thus, keeping the right leg aligned with the road's centerline ensures the car stays in the middle of the lane. Precautions When Finding 30 Centimeters: Avoid rushing to complete the roadside parking. Downshift to first gear and make slow, incremental adjustments. Pause after each adjustment to check the right rear mirror—if within 30 centimeters, stop; otherwise, proceed forward, adjust slightly right, pause to observe again, and repeat until properly aligned.

15

5

Share

How to Repair a Faulty Car Water Pump?

Repair methods for a faulty car water pump: 1. After removing the water pump, disassemble it in order. Clean the disassembled parts and inspect them one by one to check for defects such as cracks, damage, and wear. Replace any parts with severe defects; 2. If the water seal is worn and grooved, it can be smoothed with sandpaper. If the wear is excessive, it should be replaced. If the water seal seat has rough scratches, it can be repaired with a flat reamer or on a lathe. During a major overhaul, replace the water seal assembly with a new one; 3. If the pump body is damaged, welding repairs are allowed; 4. Check if the water pump bearing rotates smoothly or makes any abnormal noises. If there are issues, the bearing should be replaced; 5. After reassembling the water pump, rotate it by hand to ensure the pump shaft moves without jamming and the impeller does not rub against the pump housing. Then, check the water pump's discharge capacity. If there are issues, identify the cause and resolve them.

11

5

Share

How to Straighten a Bent Key?

What Vehicles Can a Class D License Drive?

Which ring roads in Beijing are off-limits to out-of-town vehicles?

Is an Idle Speed of 1000 RPM Normal for a Car?

What Does Car Glazing Mean?

How to Find 30 Centimeters While Sitting in a Car?

How to Repair a Faulty Car Water Pump?

How to Determine if an Oxygen Sensor is Good or Bad?

How to Drive a Manual Transmission in Stop-and-Go Traffic?

How often is the vehicle annual inspection required?

What is the car's recirculation symbol?