How to Store Engine Oil?

1 Answers
VanBrianna
07/28/25 5:04pm
Unopened engine oil should be stored in a dry and cool place, away from direct sunlight and heat sources. Opened engine oil should be properly sealed before storage in a dry and cool place, also avoiding direct sunlight and heat sources. Below is relevant information about engine oil: 1. Main Features: The engine is the heart of a car, containing many metal surfaces that move against each other in friction. These components operate at high speeds and in harsh environments, with working temperatures reaching 400°C to 600°C. Advanced technology can convert natural gas into crystal-clear, fully synthetic base oil, to which unique power-cleaning technology is added, creating lubricants with superior cleaning and protective performance. 2. Requirements: As a type of machinery, engines have specific requirements for lubricants that are similar to those of general machinery, such as appropriate viscosity, and certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature performance requirements.
Was this review help?
19
2
Share
More Forum Discussions

How to Turn Off the Radio in a Volkswagen Golf?

To turn off the radio in a Volkswagen Golf: Press the power button on the radio to switch it off, or simply switch the audio source to Bluetooth or USB, which will also turn off the radio. The Golf is a compact car produced by Volkswagen, with dimensions of 4199mm in length, 1786mm in width, and 1479mm in height. The latest Golf model is equipped with three types of engines: a 1.6L naturally aspirated engine, a 1.2L turbocharged engine, and a 1.4L turbocharged engine. The 1.6L naturally aspirated engine delivers 110 horsepower and a maximum torque of 155 Nm; the 1.2L turbocharged engine has a maximum power output of 85 kW and a maximum torque of 200 Nm; the 1.4L turbocharged engine offers a maximum power of 110 kW and a maximum torque of 250 Nm.
11
0
Share

What are the differences between Dongfeng Nissan and Zhengzhou Nissan?

Dongfeng Nissan and Zhengzhou Nissan differ in the following aspects: 1. Different affiliations: Dongfeng Group and Nissan Motor Co., Ltd. jointly established Dongfeng Limited, which oversees Dongfeng Motor Corporation and Dongfeng Nissan. Dongfeng Motor Corporation, in turn, oversees Zhengzhou Nissan. Therefore, both Zhengzhou Nissan and Dongfeng Nissan are subsidiaries of Dongfeng Limited. 2. Different vehicle models: From a model perspective, Dongfeng Nissan primarily produces high-end sedans and SUVs, while Zhengzhou Nissan mainly manufactures high-end pickups, modified vehicles, and multi-purpose commercial vehicles. 3. Different establishment times: Zhengzhou Nissan was the first joint venture automaker of Nissan in China, established in May 1993 as a vehicle manufacturing enterprise jointly formed by Chinese and Japanese parties. Dongfeng Nissan is a joint venture between Dongfeng Motor Corporation and Nissan Motor, established in June 2003. Leveraging Dongfeng Motor's strong background, Nissan's sales began to rebound rapidly, reaching cumulative sales of one million vehicles by 2015.
14
0
Share

Why is the tire pressure low in one tire?

The reason for low tire pressure in one tire is that the tire has a slow leak. This situation requires timely inspection and repair of the tire to prevent safety hazards while driving. The standard tire pressure for car tires is generally around 2.5bar. If the tire pressure is too high, the car may feel unstable at high speeds. When the tire pressure is too low, it can affect the car's handling and increase fuel consumption. After repairing or replacing a tire, it is essential to perform a four-wheel alignment and dynamic balance. Otherwise, the car may experience abnormal body vibrations at high speeds, significantly increasing safety risks.
20
5
Share

What is considered a normal engine idle speed?

An engine idle speed between 550 and 800 RPM is considered normal. When the engine is cold, the idle speed tends to be higher, typically ranging from 950 to 1300 RPM. Once the engine temperature rises to a certain level, the idle speed will decrease to the normal range. The idle speed of a car refers to an operating condition where the engine runs without any load, meaning the car is in neutral gear. The rotational speed of the engine during idle is known as the idle speed, which can be adjusted by modifying the throttle opening size, among other methods. Idling essentially means the engine is running but not performing any work. When the accelerator pedal is fully released while the engine is running, the engine enters the idle state. During idle speed adjustment, the RPM should not fluctuate abruptly, as this can cause premature wear to the engine.
8
3
Share

Where is the one-key start button for Audi Q5?

Audi Q5's one-key start button is located near the steering wheel, in front of the handbrake on the center console, and it is a silver button. The Audi Q5 can be started not only with the one-key start device but also with the key by inserting it into the key slot near the steering wheel. The one-key start differs from the traditional mechanical key ignition method and the conventional starting procedure; simply press the one-key start button lightly to start or turn off the engine. The Audi Q5 is a versatile SUV that perfectly combines the body design of a sports car, efficient power, and sensitive handling. The dimensions of this car are 4629mm in length, 1898mm in width, 1655mm in height, with a wheelbase of 2897mm.
3
5
Share

What is the wading depth of the Sagitar?

The maximum wading depth of the Sagitar is 310mm. The wading depth of the Sagitar is determined by the height of the vehicle's chassis, which is the ground clearance listed in the vehicle's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Sagitar is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion; Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration; On roads prone to waterlogging, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to estimate the water depth before deciding whether to proceed; Be aware of your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not proceed and choose an alternative route instead.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.