How to Step on the Clutch and Brake When Turning?
3 Answers
Here are some tips for stepping on the clutch when turning: 1. When turning, make judgments based on the situation. If it's a wide turn, you don't need to shift gears. Just control the speed and gently press the brake to slow down, then accelerate after the turn. 2. If you encounter a sharp turn with a small radius, slow down in advance and downshift. Not slowing down may cause the car to lose control, and not downshifting may lead to insufficient power, causing the car to shake or even stall. After downshifting, turn while keeping the gear engaged. Here are some precautions when turning a car: 1. When turning, adjust the steering wheel according to the curve of the road and coordinate it with the car's speed. 2. Ensure the steering angle is appropriate, the timing of turning is right, and the steering wheel is turned back promptly. Never take both hands off the steering wheel to avoid dangerous deviations.
I have a well-practiced method for using the clutch and brakes when turning. Two or three seconds before entering the turn, lightly press the brake to slow down—don't wait until mid-turn to brake hard, as that can easily lead to loss of control. Maintaining a speed around 30 km/h is the most stable; slow down further for sharper turns. Feather the clutch slightly to avoid stalling, but don’t press it too deeply, or you’ll lose power. After exiting the turn, gradually release the clutch while gently applying the throttle to regain speed. Over years of driving, I’ve learned that anticipation is key—read the road ahead and adjust smoothly, avoiding panic reactions to cars behind. Be extra cautious in rain or snow, reducing speed by half and making movements gentler. With enough practice, it becomes second nature, making turns feel as smooth as flowing water.
When turning a car, handling the clutch and brake should be combined with physical principles, as the vehicle's centrifugal force requires smooth deceleration. Before entering the turn, gently press the brake to slow down gradually, keeping the engine running without dragging. Depress the clutch momentarily to disengage power and prevent stalling, but avoid prolonged partial clutch engagement to prevent wear. Lightly tap the clutch during the turn to assist steering, adjusting the pressure based on road conditions. When exiting the turn, gradually release the clutch while applying the throttle to ensure traction recovery. It's recommended to practice in an open area to master the coordination between the two pedals. Paying extra attention during daily driving can prevent unnecessary jerking or accidents.
