How to Step on the Clutch and Brake for Hill Parking?

1 Answers
MacSienna
07/24/25 5:27am
When going uphill, maintain a half-clutch state, then stabilize the clutch and steering (the right wheel must not exceed the far right edge of the yellow line). When reaching the parking spot, step on the clutch and brake simultaneously (the interval between clutch and brake should not exceed 2 seconds).
Was this review help?
5
2
Share
More Forum Discussions

How Often Should a New Motorcycle Undergo Annual Inspection?

For a newly purchased and registered motorcycle, the first four years require an inspection every two years. Starting from the fifth year onwards, an annual inspection is mandatory. Relevant details: 1. Regulatory Basis: According to the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China", motor vehicles must undergo safety technical inspections within the following periods from the date of registration: Passenger vehicles for commercial use must be inspected once a year within the first five years; after five years, every six months. 2. Other Provisions: Small and micro non-commercial passenger vehicles must be inspected once every two years within the first six years; after six years, once a year; after 15 years, every six months; motorcycles must be inspected once every two years within the first four years; after four years, once a year; tractors and other motor vehicles must be inspected once a year.
19
0
Share

What is the driving scope of a Class M driver's license?

The driving scope of a Class M license is limited to wheeled self-propelled machinery. The eligible age range for applying for this license is from 18 to 60 years old. Apart from operating wheeled self-propelled machinery, drivers are not permitted to operate any other vehicle types. After reaching 60 years of age, drivers must annually submit a physical condition certificate for motor vehicle drivers to the vehicle management office. Additional information: 1. The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulate: Applicants learning to drive on public roads must carry their driving learner's permit at all times, use a coach car or a self-learning vehicle marked with special identifiers, and follow the designated routes and times specified by the traffic management department of the public security authority under the guidance of an instructor or designated supervisor. 2. Regulations for self-learning candidates: When applicants are self-learning candidates, they must properly place and affix special learning identifiers on their self-learning vehicles while practicing driving on public roads. The self-learning vehicle must not carry any passengers other than the designated supervisor.
11
5
Share

How to Steer the Wheel When Reversing a Car?

There are two key points for steering the wheel when reversing: 1. The steering direction depends on the turning direction during reversing - turn the wheel right when reversing to the right, and left when reversing to the left. 2. When reversing left, pay attention to the right front of the car; when reversing right, watch the left front. Precautions for reversing include: 1. Before reversing, first check the situation behind the car, estimate the reversing path, and ensure the front won't hit obstacles. Avoid pressing the accelerator and control the speed to keep it slow. 2. During reversing, don't just focus on the rear. While ensuring rear safety, frequently check the side mirrors to monitor the distance between obstacles and the car body, and use the steering wheel to adjust the car's position accordingly.
3
2
Share

What tires does the Lexus ES use?

The Lexus ES is equipped with Yokohama's BluEarth tires. The tire size is 215/55R17. The BluEarth tires on the Lexus ES are also known as Yokohama tires. Tires are one of the most important components of a vehicle, primarily supporting the vehicle's entire weight, bearing the car's load, and transmitting forces and moments in other directions. When using the Lexus ES tires in daily driving, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallow. If the tread wears flat, it will lose its water drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may seem minor but can pose a risk of tire blowouts at high speeds. Additionally, promptly remove small stones lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this can accelerate tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the road.
7
5
Share

What to Do When the Steering Wheel is Not Aligned Properly?

Steering wheel alignment issues can be addressed with the following methods: 1. Perform a four-wheel alignment. 2. Visit a maintenance facility to check tire pressure and ensure all tires have consistent pressure. 3. Inspect the suspension and steering system. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver on the steering wheel edge into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and the main driver's airbag. Solutions for a shaking steering wheel include: 1. Apply grease to the plane bearing or replace it. 2. Add shims to the stabilizer bar bushing. 3. Apply grease inside the dust cover. 4. Remove the steering wheel's airbag clock spring, apply grease, or replace it.
19
5
Share

What is the reason for the Changan CS15 transmission's inability to upshift?

Changan CS15 transmission's inability to upshift is usually caused by improper adjustment of the throttle cable or throttle position sensor, among other reasons. Below is the relevant content: Common causes: Improper adjustment of the throttle cable; faulty vehicle speed sensor; stuck shift valve or faulty gear switch. Solutions: Check and adjust the throttle cable and throttle position sensor; inspect the vehicle speed sensor and replace it if necessary. Check the gear switch signal, and if there are no faults in the control system, disassemble and inspect the automatic transmission. Introduction to Changan CS15: The Changan CS15 is a compact SUV under the Changan Automobile brand, with body dimensions of 4135mm in length, 1740mm in width, and 1630mm in height, and a wheelbase of 2520mm.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.