How to Steer When the Rear of the Car Drifts to the Left?

1 Answers
EstherAnn
07/29/25 4:35pm
The steering method when the rear of the car drifts to the left is as follows: 1. When reversing: Turn the steering wheel to the left, and the rear of the car will turn left; turn the steering wheel to the right, and the rear of the car will turn right. 2. When correcting: If the rear of the car drifts to one side, when the body drifts left, you need to move right to correct it, so steer right; otherwise, do the opposite. Precautions for reversing are as follows: 1. Speed: When reversing, master the operation method of slow driving and quick steering. The reversing speed should be controlled within 5km/h. 2. Repeated reversing: During reversing, if limited by terrain or the steering angle of the steering wheel, and repeated forward or backward movements are required, at the moment before each stop when reversing or moving forward, quickly use the movement of the vehicle to turn the steering wheel to prepare for the next forward or backward movement. Do not forcefully turn the steering wheel after the vehicle has stopped.
Was this review help?
17
3
Share
More Forum Discussions

How to Replace a Lost Key for Buick Excelle?

The service station requires the vehicle and the owner's ID documents. Depending on the model, the service station may also require the owner to provide the 17-digit anti-theft password for key programming. Depending on the model, the locks that need to be replaced vary. If replacing the entire set of locks, more locks will need to be changed.
20
5
Share

How to Start a Buick Regal with a Dead Battery?

Open the vehicle's front hood, locate the positive terminal post under the left cover of the engine compartment fuse box, remove the cover to expose the remote positive terminal post. The negative grounding point is the engine block or an engine mounting bolt, and the grounding point should be as far away from the battery as possible. Place the transmission in P (Park) position, engage the parking brake. Turn the ignition switch to the off position and turn off all lights and accessories in the vehicle.
7
2
Share

What are the symptoms of a clogged fuel filter?

Gasoline filter clogging symptoms include insufficient fuel supply to the engine, decreased engine power, weak vehicle movement, and reduced speed. The gasoline filter, also known as the fuel filter or fuel strainer, is collectively referred to as the fuel filter. The function of the fuel filter is to filter out impurities such as iron oxide, dust, harmful particles, and moisture contained in the gasoline and fuel system, protecting components like the injector, cylinder liner, and piston rings, preventing fuel system blockages, reducing wear on engine parts, and ensuring stable engine operation. The gasoline filter is used to filter gasoline. If it is not replaced for a long time, it will become clogged. The gasoline filter should be replaced during every major maintenance service. The specific replacement time should be checked in your vehicle's maintenance manual.
14
0
Share

How to Replace the Battery in an Audi Car Key?

Steps to replace the battery in an Audi car key: 1. Press the switch on the metal part at the back of the key, and while pressing, pull the metal part outward to remove the mechanical key; 2. There are two clips on both the front and back of the original metal part's position. Press them simultaneously and pull outward to remove the old battery; 3. Install the new battery, ensuring the positive and negative poles are not reversed. Reassemble in the reverse order of disassembly. Audi is a German luxury car brand, focusing on the mid-to-high-end automotive market, primarily offering sedans and SUVs. For example, the Audi A6 has a length, width, and height of 5012 mm, 1855 mm, and 1485 mm respectively, with a wheelbase of 2945 mm.
11
3
Share

What is the equivalent of Euro VI in China's emission standards?

Automotive environmental Euro VI is equivalent to China's National VI-A emission standard, but it is not as stringent as the National VI-B emission standard. In China, the European emission standards have been widely adopted. The Euro VI emission standard was introduced in 2014, while China's National VI emission standard was proposed by the Ministry of Environmental Protection in December 2016. Compared to National V, the National VI standard is nearly 50% stricter in terms of pollutant emission limits, with the same requirements applying to diesel vehicles. In terms of data, carbon monoxide emissions will be reduced by 50% from the previous baseline, with similar reductions for total hydrocarbons and non-methane hydrocarbon emissions. Nitrogen oxide emissions are required to decrease by approximately 42%.
3
1
Share

Is the Engine of the Guangqi Honda City Imported?

The engine of the Guangqi Honda City is not imported; it utilizes technology from the Sino-Japanese joint venture. The Guangqi Honda City is equipped with a 1.5-liter naturally aspirated engine, which delivers a maximum horsepower of 131 hp, a maximum power output of 96 kW, and a peak torque of 155 Nm. In terms of fuel economy, according to the Ministry of Industry and Information Technology's combined fuel consumption data, this engine has a combined fuel consumption of 5.4 liters per 100 kilometers. The dimensions of the 2015 Guangqi Honda City are 4440mm in length, 1695mm in width, and 1495mm in height, with a wheelbase of 2600mm. The front design of the 2015 Guangqi Honda City closely resembles that of the new Honda Fit, featuring very sharp lines on the front fenders, a dual-waistline design on the body, and a rear styling somewhat similar to the current Honda Crider.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.