How to steer when the left rear wheel crosses the line?

Where is the car-finding function of Baojun 510?

Baojun 510 does not have a car-finding function. Principle of the car-finding function: The car-finding function is achieved by pressing the horn button on the car key. Within the remote sensing range of the car key, pressing the horn button will cause the vehicle's lights to flash and the horn to sound automatically. How to use the car-finding function: For car keys that have the car-finding function, there is usually a button with a horn symbol. The operation method is to press and hold the horn button for a specified time or to press it continuously. The vehicle will honk and flash its lights to help the car owner quickly locate the parked vehicle. Additionally, pressing the unlock or lock button on the remote car key continuously can also achieve the car-finding purpose through short sound effects from the vehicle.

9

3

Share

What is the reason why the Mercedes-Benz GLB200 says the key cannot be detected?

The Mercedes-Benz GLB200 says the key cannot be detected because the battery of the key is too low or the key itself is damaged and cannot recognize the signal. Reasons for low battery in the key: Insufficient battery power inside the key. Reasons why the key cannot recognize the signal: Key fob malfunction, damage caused by mechanical impact on internal circuits, dead battery, electromagnetic interference, the environment where the owner is located has electromagnetic interference, which can cause signal transmission disorder, virtual soldering of the distribution box, poor contact caused by virtual soldering, which can also cause the sensor to fail. Sensor module failure. The failure of the sensor module is equivalent to directly losing the 'connection' object, and the signal sent by the key is invalid at this time.

12

2

Share

What are the gear introductions for Hyundai automatic transmission vehicles?

Modern Elantra gear usage instructions are as follows: P Parking Gear: Can only be engaged when the car is completely stopped. To exit this gear position, press the brake pedal and turn on the ignition switch. R Reverse Gear: This gear is used for reversing. It can only be engaged after the car has come to a complete stop by pressing the brake pedal while reversing, and cannot be engaged while driving. N Neutral Gear: The neutral gear is located after the reverse gear. After engaging the neutral gear, the vehicle's engine power cannot be transmitted, and it is generally used for short-term parking. D Drive Gear: The automatic transmission works automatically while driving, and the driver only needs to control acceleration and deceleration. M Manual Gear: In manual gear mode, the driver needs to manually increase or decrease the gear, and the transmission will not intervene automatically.

11

1

Share

What are the differences between the Cadillac CT5 and CT6?

In terms of body dimensions: The Cadillac CT5 measures 4924mm in length, 1883mm in width, and 1453mm in height; the CT6 measures 5223mm in length, 1879mm in width, and 1492mm in height. In terms of wheelbase: The Cadillac CT5 has a wheelbase of 2947mm; the CT6 has a wheelbase of 3109mm. In terms of vehicle classification: The Cadillac CT5 is classified as a midsize car; the CT6 is classified as a full-size car. In terms of exterior design: The Cadillac CT5 incorporates black elements, with a more aggressive and stylish front fascia; the CT6 features a V-shaped mesh grille, 7-shaped headlight design, and adds side air intake decorations at the lower end of the vertical LED daytime running lights.

2

4

Share

How much should the car body be lowered before modifying the sway bar link?

Modification of the sway bar link is required when the height is below 68cm. The sway bar link refers to the car's stabilizer bar. Below is a detailed introduction about the car stabilizer bar: 1. Overview: The stabilizer bar (also known as sway-bar, anti-roll-bar, or stabilizer-bar), also referred to as an anti-roll bar or balance bar, is an auxiliary elastic component in the car's suspension system. To improve the car's ride comfort, the suspension stiffness is usually designed to be relatively low, which affects the car's driving stability. 2. Other functions: The purpose of the stabilizer bar is to prevent excessive lateral roll of the car body during turns and to maintain balance as much as possible. Its goal is to reduce the degree of lateral roll and improve ride comfort. The stabilizer bar is essentially a horizontally placed torsion bar spring and can be functionally considered as a special type of elastic component.

11

1

Share

Can a B2 driver's license be reviewed in a different location?

B2 driver's license can be reviewed in a different location after receiving penalty points. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Article 70 Motor vehicle drivers shall, in accordance with the provisions of laws and administrative regulations, regularly undergo review at the traffic management department of the public security organs. When motor vehicle drivers renew their motor vehicle driver's licenses in accordance with Articles 57 and 58 of these regulations, they shall undergo review by the traffic management department of the public security organs. Extended information: The following violations by motor vehicle drivers will result in 6 penalty points: Driving a motor vehicle while the driver's license is temporarily suspended. Driving a motor vehicle in violation of traffic signal lights. Driving a passenger transport vehicle (excluding buses) or school bus with more than the approved number of passengers but less than 20%, or driving other passenger vehicles with more than 20% of the approved number of passengers.

1

5

Share

How to steer when the left rear wheel crosses the line?

Where is the car-finding function of Baojun 510?

What is the reason why the Mercedes-Benz GLB200 says the key cannot be detected?

What are the gear introductions for Hyundai automatic transmission vehicles?

What are the differences between the Cadillac CT5 and CT6?

How much should the car body be lowered before modifying the sway bar link?

Can a B2 driver's license be reviewed in a different location?

What is the difference between second gear and reverse gear?

Does the CS85 have a four-wheel drive model?

What are the differences between Kawasaki Z400 and Ninja 400?

Is the Subject 3 Test Conducted in a Test Center or on the Road?