How to Steer When Reversing to the Right Rear?

[LeVincent]

When the right starting sensor line appears and is about to align with the lower edge of the left rearview mirror, turn the steering wheel fully to the right. When the far right line becomes visible and the distance between the car body and the parking space corner is less than 30CM, turn the steering wheel back halfway. Continue driving, and when the parking space corner disappears from the lower edge of the right rearview mirror, continue turning the steering wheel fully to the right. Observe the right rearview mirror. When the edge line of the parking space is parallel to the car body, quickly straighten the steering wheel and continuously adjust the car body. The reversing is now completed.

[Douglas]

When reversing to the right rear, I'm used to turning the steering wheel to the right because the steering wheel controls the direction of the front wheels. Turning right makes the wheels turn right, pushing the rear of the car to move backward to the right. When operating in a garage or narrow alley, I always check the rearview mirror first to see if there are any cars or obstacles behind me. If necessary, I quickly glance over my shoulder to check the right blind spot. Keep the speed slow, gently press the brake or control the throttle, and avoid rushing to hit something. Beginners often confuse the direction, thinking that turning left while reversing will make the car go right, resulting in hitting a wall. This stems from a misunderstanding of the car's dynamics. With over a decade of driving experience, I recommend practicing reverse parking in an open area to get familiar with it and avoid panic. Also, pay attention to tire pressure; low pressure makes steering unstable and increases the risk of scraping or bumping. Safety first—after reversing, don't forget to check if the lights are on to warn people around you.

[Pete]

When I was learning to drive, my instructor taught me that turning the steering wheel to the right while reversing means the car will move to the right rear. It sounded super simple, but the first time I tried it in a supermarket parking space, I was confused: I turned the steering wheel to the left, and the car’s rear almost crashed into a trash bin. So remember, the direction you turn the steering wheel matches the direction you want the car’s rear to move—turn right for the right rear. When operating, use the interior rearview mirror to track the car’s rear movement and the side mirrors to check the curb, while keeping the speed slow in a low gear. If it’s dark, make sure the reversing lights are on for better visibility. A common mistake is turning the steering wheel too sharply out of impatience, leading to oversteering and hitting a pole. I recommend using a reversing camera if you’re inexperienced, and with practice, you’ll get the hang of it. Reversing is a skill—stay calm and don’t force it in crowded areas. Before turning off the engine, check if the car is properly aligned and not blocking others.

[McHector]

When reversing to the right rear, turn the steering wheel to the right. This is based on the front-wheel steering principle: turning right causes the front wheels to steer right, and the reversing thrust moves the rear of the car to the right. During operation, first check the rearview mirror to assess the distance behind. In heavy traffic, turn your head to check for obstacles in blind spots. Slow down and carefully control with the brakes to avoid collisions. Common mistakes include incorrect steering or over-adjustment. New drivers should practice steering feel in open areas for safety and peace of mind. Ensure the reversing lights are functional for safe nighttime operation.