How to Steer Through an S-Curve?

1 Answers
DiGiselle
07/29/25 8:37pm
When driving through an S-curve, keep the left front corner of your car aligned with the right edge line and the right front corner aligned with the left edge line while steering. Here’s an introduction to S-curve driving techniques: 1. Test Criteria: If any wheel touches the road edge line, 100 points will be deducted (previously, squeezing the edge line resulted in a 20-point deduction, while crossing it led to a 100-point deduction. The new standard raises the penalty for squeezing the edge line to 100 points as well.) Stopping midway also results in a 100-point deduction. 2. Technique: When approaching the entrance of the S-curve, position your vehicle in the center of the road. As you enter the curve, stay close to the right edge line. When the gap on the left side of the engine hood aligns with the right yellow line, turn the steering wheel one full rotation to the left. For the first curve, straighten the wheel by turning it one full rotation to the right.
Was this review help?
3
0
Share
More Forum Discussions

Where does the license plate 'Lu P' belong to?

Lu P is the license plate for Liaocheng City in Shandong Province. The license plates for other regions in Shandong Province are as follows: Lu A for Jinan City, Lu B for Qingdao City, Lu C for Zibo City, Lu D for Zaozhuang City, Lu E for Dongying City, Lu F for Yantai City, Lu G for Weifang City in Shandong Province, Lu H for Jining City, Lu J for Tai'an City, Lu K for Weihai City, Lu L for Rizhao City, Lu M for Binzhou City, Lu N for Dezhou City, Lu O for provincial government agencies, Lu Q for Linyi City, Lu R for Heze City, and Lu S for Laiwu City. License plates, commonly known as vehicle tags, are plates affixed to the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information.
4
2
Share

Where to Take the Motorcycle License Test in Changchun?

If you want to take the motorcycle license test in Changchun, you should apply at the Changchun Vehicle Management Office (not at a driving school). After accepting your application, the Vehicle Management Office will arrange for you to study at a formal driving school and take the test. When registering for the exam, bring your original valid ID card and a copy of both sides, four one-inch bareheaded photos, and go to the motorcycle license window of the Urban Traffic Bureau to fill out the motorcycle license application form. After filling it out, pay the fee, then go to the medical center for a physical examination, and finally submit all documents to complete the registration. Additional notes: 1. Classification: Motorcycle licenses are generally divided into two types—three-wheeled motorcycle (D license) and two-wheeled motorcycle (E license). The process and fees are basically the same. 2. Requirements: You must bring your ID card for each subject test, and the examiner will verify your identity each time.
19
0
Share

What are the reasons for insufficient fuel supply in a car?

There are several reasons for insufficient fuel supply in a car: 1. Incorrect valve timing, such as poor sealing of intake and exhaust valves; 2. Fuel pump malfunction due to internal or circuit issues, overheating causing poor performance, short circuit, or burnout leading to insufficient or stopped fuel supply; 3. Blockage in the intake system, such as the air filter not allowing proper combustion with fuel; 4. Internal engine faults, improper maintenance, abnormal wear, or issues with cylinder compression; 5. Blockage in the fuel system; 6. Abnormal ignition of spark plugs, aging components, exceeding normal lifespan requiring replacement, carbon deposits, incorrect model selection; 7. Poor performance of the ignition system, such as issues with spark plugs or high-voltage wires.
12
0
Share

What causes the shaking when accelerating in a Classic Focus?

The reasons for shaking when accelerating in a Classic Focus are: 1. Damaged engine mount rubber. When the engine mount rubber is damaged, its noise and vibration reduction functions are insufficient, especially noticeable during acceleration and deceleration with significant shaking and noise; 2. Unbalanced wheels can also cause shaking during acceleration, with the steering wheel shaking more noticeably; 3. Excessive carbon buildup in the throttle body. Carbon deposits in the throttle body can lead to various minor issues, with acceleration shaking being one of them; 4. Problems inside the engine; 5. Faulty spark plugs. In the engine cylinders, the air-fuel mixture requires an electric spark to ignite. If the spark is weak or absent, it can lead to a misfire, disrupting the engine's balance and resulting in shaking and noise; 6. Clutch slippage. Both manual and dual-clutch transmissions transmit power by pressing the clutch plates. When the clutch slips, it can cause engine shaking similar to semi-engagement in mild cases, or jerking and even stalling in severe cases.
15
3
Share

Where is the maximum wear area of a piston generally located?

The maximum wear area of a piston is typically the piston ring groove. Below are relevant details about piston ring grooves: 1. End gap: This refers to the clearance between the two ends of a piston ring when it is placed in a standard ring gauge or in an unworn section of the cylinder bore. This gap should be controlled within 0.45-0.10mm, 0.39-10.10mm, and 0.50-1.00mm. This clearance prevents the piston ring from seizing due to thermal expansion. 2. Side clearance: This refers to the gap between the side of the piston ring and the ring land when the ring is placed in the piston ring groove. Excessive side clearance can affect the piston's sealing performance, while insufficient clearance may cause the ring to seize. The recommended clearance is 0.05-0.11mm for the top compression ring and 0.03-0.09mm for other compression rings and oil rings.
2
3
Share

What are the causes of engine cylinder deactivation?

Engine cylinder deactivation is caused by: 1. Excessive wear gap in the engine cylinder liner and piston rings, improper closing of intake and exhaust valves, and cylinder pressure insufficiency due to leaking valve seals; 2. Poor fuel atomization caused by worn fuel injectors, leading to increased or decreased fuel quantity, or even failure to inject fuel; 3. Issues with the engine control unit (ECU). An engine is a machine capable of converting other forms of energy into mechanical energy, suitable for power generation devices. It is categorized by structural function into: 1. External combustion engines: Fuel burns outside the engine; 2. Internal combustion engines: Fuel burns inside the engine; 3. Gas turbines: Combustion produces high-pressure gas, which drives the turbine blades to rotate and output power.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.