How to Steer the Wheel Without Getting Confused?

2 Answers
TannerLee
09/05/25 4:02am
Here are the methods to steer the wheel without getting confused: First, fix the steering wheel in the straight position. A full turn is one and a half rotations, so use one and a half rotations or the outer circle as a reference when steering to avoid confusion. If you forget which side you turned the wheel from, observe while driving—if the car is moving straight, the steering wheel is in the straight position. If the car veers left, steer right; if it veers right, steer left. Additional tips: 1. When steering, always alternate your hands to avoid tangling them. For a right turn, the left hand pushes while the right hand turns. When the left hand reaches the 3 o'clock position and the right hand reaches the 9 o'clock position, quickly release the right hand and let the left hand continue steering right until the 6 o'clock position. 2. At this point, the right hand should re-grip the wheel at the 12 o'clock, 5 o'clock, or 11 o'clock position—adjust based on the situation. Then continue steering until the 3 o'clock and 9 o'clock positions complete one full rotation.
Was this review help?
11
0
Share
AlexandraFitz
09/17/25 4:36am
When I first learned to drive, I was also often worried about making mistakes with the steering wheel. During practice, pay attention to maintaining the correct hand position, such as using the push-pull method: push with the left hand and pull with the right hand, avoiding crossing hands to prevent confusion. When turning or changing lanes, the movements should be gentle—don’t steer abruptly, especially in traffic jams where panic can set in. Find a safe place, like an empty parking lot, to practice basic maneuvers and get familiar with the vehicle’s power steering feel. Different cars have different power steering responses; some light cars turn with just a touch, while heavier vehicles require more force—adapt in advance to avoid fumbling in emergencies. Develop the habit of looking ahead at the road conditions, anticipating the required turning angle, and turning the steering wheel slowly while controlling the speed to minimize mistakes. Remember to stay calm; mistakes often stem from panicked reactions. Practice a few more times, and it will become second nature.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

At how many kilometers is a motorcycle scrapped?

Motorcycles are scrapped at 100,000 kilometers. A motorcycle is a two or three-wheeled vehicle driven by a gasoline engine and steered by handlebars to control the front wheel. They are lightweight, flexible, fast, and widely used for patrols, passenger and cargo transportation, and also serve as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. The method to start a motorcycle is: 1. Use the main stand to support the bike on flat ground; 2. Stand in the direction the kickstarter is pressed—if the kickstarter is pressed forward, face forward and step on it to start; 3. If the kickstarter is pressed backward, face backward and step on it to start.
9
4
Share

How to Process Driver's License Inspection?

The procedure for driver's license inspection is as follows: Bring your ID card, driver's license, four 1-inch white-background color photos, and a medical examination form to the local vehicle management office for processing. The inspection of a motor vehicle driver's license includes: 1. Road traffic violations and accident handling records; 2. Physical condition; 3. Road traffic violation points and participation in study and examination after accumulating 12 points. The inspection of the driver's license cannot exceed 3 years. According to the regulations on the application and use of motor vehicle driver's licenses, if the driver is unable to process the inspection or renewal of the driver's license within the specified time due to reasons such as military service, going abroad, or imprisonment, they can apply to the relevant department for a delayed inspection or renewal, but the delay cannot exceed 3 years.
14
1
Share

How often should a minibus undergo annual inspection after six years?

A minibus should undergo annual inspection once a year after six years. The contents of the vehicle annual inspection include: appearance check, exhaust emission test, chassis inspection, OBD inspection, lighting inspection, and brake inspection. Vehicle annual inspection can help eliminate potential safety hazards in time, urge the strengthening of vehicle maintenance, and reduce the occurrence of traffic accidents. The materials required for annual inspection are: 1. Copy of compulsory traffic insurance; 2. Original driving license and road and bridge card; 3. First copy of road and bridge ticket; 4. Copy of owner's ID card; 5. The vehicle. Things to note during annual inspection: 1. Start the vehicle in advance in the external inspection area for preheating; 2. The owner should clean the vehicle body in advance before the annual inspection; 3. Restore the original state of the headlights before the annual inspection.
1
1
Share

Which mode of the Fista has engine sound enhancement?

The Fista's Comfort mode, Sport mode, Eco mode, and Smart Driving mode all feature enhanced engine sound. Taking the Fista 2021 280TGDi GLX Elite Edition as an example, its dimensions are 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm. It has a fuel tank capacity of 53 liters and features a 4-door, 5-seater sedan body structure. In terms of power, it is equipped with a 1.6-liter turbocharged engine delivering a maximum power of 140 kW and a maximum torque of 265 Nm. For suspension, this model uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
20
5
Share

What to Do When the Clutch Plate Slipping?

The solution for clutch plate slipping is: If the slipping is not severe, it can be adjusted without replacing the clutch plate and pressure plate; if the slipping is very severe, almost exposing the rivets, then the clutch plate and pressure plate must be replaced. The clutch plate is a composite material primarily designed for friction, with structural performance requirements. The functions of the clutch are: 1. To engage the engine and transmission to ensure smooth vehicle starting; 2. To disconnect the engine from the transmission for easier gear shifting; 3. To prevent the transmission system from overloading during emergency braking; 4. To reduce torsional vibration impact.
15
3
Share

Where Does Brake Fluid Usually Leak?

Brake fluid usually leaks at the connection points between the brake pump and the pipelines or the brake handle. Brake fluid, also known as hydraulic brake fluid or brake oil, is made from refined diesel distillate with thickeners and antioxidants. There are three types of brake fluid: mineral oil brake fluid, alcohol-based brake fluid, and synthetic brake fluid. Precautions for using brake fluid include: 1. Avoid mixing with gasoline or engine oil; 2. Replace it regularly; 3. Choose high-quality brake fluid. The characteristics of brake fluid are: 1. Low freezing point: It maintains good fluidity at low temperatures; 2. Extremely high boiling point: It does not form vapor locks at high temperatures; 3. Minimal quality changes: It does not corrode or soften metals and rubber.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.