How to Steer the Wheel in the Curve Driving of Subject 2?
3 Answers
Subject 2 curve driving can be operated as follows: 1. When entering from the left, keep the vehicle as close to the right line as possible before turning the steering wheel to the left; when entering from the right, do the opposite—keep the vehicle as close to the left line as possible before turning the steering wheel to the right. This is done to account for the inner wheel difference and avoid the rear wheels pressing the line during the turn. 2. During the S-line movement, keep the front of the car pressing along the edge line. Taking the left entrance as an example, when the right corner of the car touches the right line, turn the steering wheel one full turn to the left, keeping the left corner of the car at a certain angle to the line on the ground. By following the right line of the first curve of the S-path, the car will not press or go out of the line. When reaching the second curve, follow the same method as the first curve. 3. Maintain slow speed and check the left and right rearview mirrors to see if the wheels are pressing the yellow line. Adjust the steering based on the distance between the wheels and the yellow line, deciding whether to turn the wheel more or less.
I practiced steering during curve driving many times before taking the Subject 2 test. The key is to be steady—don’t turn the wheel too abruptly; keep the movements gentle. Before entering the curve, slow down to walking speed, hold the clutch at half-engagement, and start turning slightly when the front of the car aligns with the curve entrance—just 45 to 90 degrees left for a left turn, no need for full rotations. As you drive, watch the reference point on the hood: if it drifts outside the lane line, make slight adjustments. Remember to start straightening the wheel before fully exiting the curve; waiting until the car is completely straight may cause the wheels to cross the line. Also, glance at the rearview mirror to ensure the rear wheels don’t scrape the edge. Practice by driving along S-shaped lines in an open area until you get the hang of it. Coordinate the clutch with steering, stay relaxed, and avoid nervous, jerky movements.
When teaching students to practice driving, the technique for steering during curve driving emphasizes a sense of rhythm. The speed must be slow, using first gear to move forward at low speed, which allows for more precise steering wheel operation. Prepare to turn the steering wheel before entering the curve—turn left for a left curve, with a moderate angle of about 60 degrees. Make slight adjustments in the middle section to keep the car centered. Straighten the wheel promptly when exiting the curve, stopping the turn as the car body approaches straight alignment. It's advisable to have someone help you spot reference points or use the car lights as markers, avoiding sudden or aggressive steering movements. With several attempts and coordinated clutch control, the steering movements will become smoother, helping to avoid crossing lines and losing points during the test.
