How to Steer the Wheel in a Right-Angle Turn for Subject 2?
3 Answers
Subject 2 right-angle turn steering method: 1. Before entering the right-angle turn, maintain a slow speed. If the speed is too fast, gently apply the foot brake without stopping completely, as stopping will result in a test failure. Therefore, ensure the speed is slow but avoid stopping midway. 2. Before entering the turn, position the car close to the opposite side of the turn. For a right turn during the test, the car should stay near the left side of the lane, avoiding crossing the left line. Hence, drive close to the left side. 3. As the car slowly enters the right-angle zone, focus on the right-side rearview mirror. When the mirror just passes the right-angle line by 2-3cm, quickly turn the steering wheel all the way to the right. Be sure to do this swiftly. 4. Once the right tire clears the right-angle corner, begin straightening the steering wheel while looking ahead.
The key to steering during a right-angle turn lies in timing and movement. When I was learning to drive, my instructor emphasized several points: maintain a slow speed in a low gear to minimize mistakes. Slow down to an appropriate speed before entering the turn, focus on aligning the front of the car with the outer edge of the corner, and then start turning the steering wheel—usually between one and a half to two full turns. Turning too sharply may cause the car to cross the inner line, while turning too late may scrape the outer line. The steering motion should be smooth and decisive without hesitation. After turning, observe the car's tendency to straighten out and promptly return the wheel once the body nears alignment; otherwise, the wheels may deviate and affect the turn. I recommend practicing multiple times in an open area to get a feel for the rhythm of turning and returning the wheel. Combine this with overall practice for Subject 2 to develop good habits and pass the test smoothly.
I remember helping my friend practice right-angle turns, with the focus on speed coordination and point judgment. When operating, first slow down to enter the turn, maintaining a steady speed not exceeding 5-10 km/h. Wait until the car is about to reach the turning point—usually when the reference point is the car's front aligning parallel with the roadside line—then quickly turn the steering wheel to full lock, approximately one and three-quarters turns. Keep your hands steady during the turn to avoid shaking. Simultaneously, check the rearview mirror to ensure the wheels don’t cross the line or show signs of deviation. Once the turn is complete, immediately straighten the steering wheel with gentle movements, avoiding sudden jerks. This technique requires repeated practice to develop a feel for it. Beginners often make mistakes like turning the wheel too early or straightening too slowly, but through consistent practice to build muscle memory, these errors can be avoided. During the test, stay relaxed and avoid overthinking external distractions.
